From: Sunil Goutham <sunil.kovvuri@gmail.com> To: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Sunil.Goutham@caviumnetworks.com, Sunil Goutham <sgoutham@cavium.com> Subject: [PATCH 4/6] net: thunderx: Set CQ timer threshold properly Date: Tue, 1 Dec 2015 14:43:41 +0530 [thread overview] Message-ID: <1448961223-41888-5-git-send-email-sunil.kovvuri@gmail.com> (raw) In-Reply-To: <y> From: Sunil Goutham <sgoutham@cavium.com> Properly set CQ timer threshold and also set it to 2us. With previous incorrect settings it was set to 0.5us which is too less. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> --- drivers/net/ethernet/cavium/thunder/nic.h | 5 ++--- drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 2 +- drivers/net/ethernet/cavium/thunder/nicvf_queues.h | 2 +- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/cavium/thunder/nic.h b/drivers/net/ethernet/cavium/thunder/nic.h index d3950b2..39ca674 100644 --- a/drivers/net/ethernet/cavium/thunder/nic.h +++ b/drivers/net/ethernet/cavium/thunder/nic.h @@ -120,10 +120,9 @@ * Calculated for SCLK of 700Mhz * value written should be a 1/16th of what is expected * - * 1 tick per 0.05usec = value of 2.2 - * This 10% would be covered in CQ timer thresh value + * 1 tick per 0.025usec */ -#define NICPF_CLK_PER_INT_TICK 2 +#define NICPF_CLK_PER_INT_TICK 1 /* Time to wait before we decide that a SQ is stuck. * diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c index e404ea8..206b6a7 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c @@ -592,7 +592,7 @@ void nicvf_cmp_queue_config(struct nicvf *nic, struct queue_set *qs, /* Set threshold value for interrupt generation */ nicvf_queue_reg_write(nic, NIC_QSET_CQ_0_7_THRESH, qidx, cq->thresh); nicvf_queue_reg_write(nic, NIC_QSET_CQ_0_7_CFG2, - qidx, nic->cq_coalesce_usecs); + qidx, CMP_QUEUE_TIMER_THRESH); } /* Configures transmit queue */ diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.h b/drivers/net/ethernet/cavium/thunder/nicvf_queues.h index b1e93a9..457eaee 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.h +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.h @@ -76,7 +76,7 @@ #define CMP_QSIZE CMP_QUEUE_SIZE3 #define CMP_QUEUE_LEN (1ULL << (CMP_QSIZE + 10)) #define CMP_QUEUE_CQE_THRESH 0 -#define CMP_QUEUE_TIMER_THRESH 220 /* 10usec */ +#define CMP_QUEUE_TIMER_THRESH 80 /* ~2usec */ #define RBDR_SIZE RBDR_SIZE0 #define RCV_BUF_COUNT (1ULL << (RBDR_SIZE + 13)) -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: sunil.kovvuri@gmail.com (Sunil Goutham) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 4/6] net: thunderx: Set CQ timer threshold properly Date: Tue, 1 Dec 2015 14:43:41 +0530 [thread overview] Message-ID: <1448961223-41888-5-git-send-email-sunil.kovvuri@gmail.com> (raw) In-Reply-To: <y> From: Sunil Goutham <sgoutham@cavium.com> Properly set CQ timer threshold and also set it to 2us. With previous incorrect settings it was set to 0.5us which is too less. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> --- drivers/net/ethernet/cavium/thunder/nic.h | 5 ++--- drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 2 +- drivers/net/ethernet/cavium/thunder/nicvf_queues.h | 2 +- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/cavium/thunder/nic.h b/drivers/net/ethernet/cavium/thunder/nic.h index d3950b2..39ca674 100644 --- a/drivers/net/ethernet/cavium/thunder/nic.h +++ b/drivers/net/ethernet/cavium/thunder/nic.h @@ -120,10 +120,9 @@ * Calculated for SCLK of 700Mhz * value written should be a 1/16th of what is expected * - * 1 tick per 0.05usec = value of 2.2 - * This 10% would be covered in CQ timer thresh value + * 1 tick per 0.025usec */ -#define NICPF_CLK_PER_INT_TICK 2 +#define NICPF_CLK_PER_INT_TICK 1 /* Time to wait before we decide that a SQ is stuck. * diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c index e404ea8..206b6a7 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c @@ -592,7 +592,7 @@ void nicvf_cmp_queue_config(struct nicvf *nic, struct queue_set *qs, /* Set threshold value for interrupt generation */ nicvf_queue_reg_write(nic, NIC_QSET_CQ_0_7_THRESH, qidx, cq->thresh); nicvf_queue_reg_write(nic, NIC_QSET_CQ_0_7_CFG2, - qidx, nic->cq_coalesce_usecs); + qidx, CMP_QUEUE_TIMER_THRESH); } /* Configures transmit queue */ diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.h b/drivers/net/ethernet/cavium/thunder/nicvf_queues.h index b1e93a9..457eaee 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.h +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.h @@ -76,7 +76,7 @@ #define CMP_QSIZE CMP_QUEUE_SIZE3 #define CMP_QUEUE_LEN (1ULL << (CMP_QSIZE + 10)) #define CMP_QUEUE_CQE_THRESH 0 -#define CMP_QUEUE_TIMER_THRESH 220 /* 10usec */ +#define CMP_QUEUE_TIMER_THRESH 80 /* ~2usec */ #define RBDR_SIZE RBDR_SIZE0 #define RCV_BUF_COUNT (1ULL << (RBDR_SIZE + 13)) -- 1.7.1
next reply other threads:[~2015-12-01 9:13 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-12-01 9:13 Sunil Goutham [this message] 2015-12-01 9:13 ` [PATCH 4/6] net: thunderx: Set CQ timer threshold properly Sunil Goutham
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1448961223-41888-5-git-send-email-sunil.kovvuri@gmail.com \ --to=sunil.kovvuri@gmail.com \ --cc=Sunil.Goutham@caviumnetworks.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=netdev@vger.kernel.org \ --cc=sgoutham@cavium.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.