From: Andy Gross <andy.gross@linaro.org> To: Mark Brown <broonie@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com>, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Andy Gross <agross@codeaurora.org> Subject: [Resend 1/2] regulator: qcom-smd: Add PM8916 support Date: Fri, 11 Dec 2015 00:01:33 -0600 [thread overview] Message-ID: <1449813694-11211-2-git-send-email-andy.gross@linaro.org> (raw) In-Reply-To: <1449813694-11211-1-git-send-email-andy.gross@linaro.org> From: Andy Gross <agross@codeaurora.org> This patch adds support and documentation for the PM8916 regulators found on MSM8916 platforms. Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org> --- .../bindings/soc/qcom/qcom,smd-rpm-regulator.txt | 18 ++++++ drivers/regulator/qcom_smd-regulator.c | 64 ++++++++++++++++++++++ 2 files changed, 82 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt index 7084474..e74ffe1 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt @@ -17,6 +17,7 @@ Regulator nodes are identified by their compatible: Value type: <string> Definition: must be one of: "qcom,rpm-pm8841-regulators" + "qcom,rpm-pm8916-regulators" "qcom,rpm-pm8941-regulators" - vdd_s1-supply: @@ -35,6 +36,19 @@ Regulator nodes are identified by their compatible: - vdd_s1-supply: - vdd_s2-supply: - vdd_s3-supply: +- vdd_s4-supply: +- vdd_l1_l2_l3-supply: +- vdd_l4_l5_l6-supply: +- vdd_l7-supply: +- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply: + Usage: optional (pm8916 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: - vdd_l1_l3-supply: - vdd_l2_lvs1_2_3-supply: - vdd_l4_l11-supply: @@ -57,6 +71,10 @@ of the pmics below. pm8841: s1, s2, s3, s4, s5, s6, s7, s8 +pm8916: + s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, + l14, l15, l16, l17, l18 + pm8941: s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 6fa0c7d..8464ead 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -211,6 +211,43 @@ static const struct regulator_desc pm8941_switch = { .ops = &rpm_switch_ops, }; +static const struct regulator_desc pm8916_pldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500), + }, + .n_linear_ranges = 1, + .n_voltages = 209, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm8916_nldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(375000, 0, 93, 12500), + }, + .n_linear_ranges = 1, + .n_voltages = 94, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm8916_buck_lvo_smps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), + REGULATOR_LINEAR_RANGE(750000, 96, 127, 25000), + }, + .n_linear_ranges = 2, + .n_voltages = 128, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm8916_buck_hvo_smps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(1550000, 0, 31, 25000), + }, + .n_linear_ranges = 1, + .n_voltages = 32, + .ops = &rpm_smps_ldo_ops, +}; + struct rpm_regulator_data { const char *name; u32 type; @@ -231,6 +268,32 @@ static const struct rpm_regulator_data rpm_pm8841_regulators[] = { {} }; +static const struct rpm_regulator_data rpm_pm8916_regulators[] = { + { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8916_buck_lvo_smps, "vdd_s1" }, + { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8916_buck_lvo_smps, "vdd_s2" }, + { "s3", QCOM_SMD_RPM_SMPA, 3, &pm8916_buck_lvo_smps, "vdd_s3" }, + { "s4", QCOM_SMD_RPM_SMPA, 4, &pm8916_buck_hvo_smps, "vdd_s4" }, + { "l1", QCOM_SMD_RPM_LDOA, 1, &pm8916_nldo, "vdd_l1_l2_l3" }, + { "l2", QCOM_SMD_RPM_LDOA, 2, &pm8916_nldo, "vdd_l1_l2_l3" }, + { "l3", QCOM_SMD_RPM_LDOA, 3, &pm8916_nldo, "vdd_l1_l2_l3" }, + { "l4", QCOM_SMD_RPM_LDOA, 4, &pm8916_pldo, "vdd_l4_l5_l6" }, + { "l5", QCOM_SMD_RPM_LDOA, 5, &pm8916_pldo, "vdd_l4_l5_l6" }, + { "l6", QCOM_SMD_RPM_LDOA, 6, &pm8916_pldo, "vdd_l4_l5_l6" }, + { "l7", QCOM_SMD_RPM_LDOA, 7, &pm8916_pldo, "vdd_l7" }, + { "l8", QCOM_SMD_RPM_LDOA, 8, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" }, + { "l9", QCOM_SMD_RPM_LDOA, 9, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" }, + { "l10", QCOM_SMD_RPM_LDOA, 10, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l11", QCOM_SMD_RPM_LDOA, 11, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l12", QCOM_SMD_RPM_LDOA, 12, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l13", QCOM_SMD_RPM_LDOA, 13, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l14", QCOM_SMD_RPM_LDOA, 14, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l15", QCOM_SMD_RPM_LDOA, 15, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l16", QCOM_SMD_RPM_LDOA, 16, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l17", QCOM_SMD_RPM_LDOA, 17, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l18", QCOM_SMD_RPM_LDOA, 18, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + {} +}; + static const struct rpm_regulator_data rpm_pm8941_regulators[] = { { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8x41_hfsmps, "vdd_s1" }, { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8x41_hfsmps, "vdd_s2" }, @@ -274,6 +337,7 @@ static const struct rpm_regulator_data rpm_pm8941_regulators[] = { static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators }, + { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators }, { .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators }, {} }; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: andy.gross@linaro.org (Andy Gross) To: linux-arm-kernel@lists.infradead.org Subject: [Resend 1/2] regulator: qcom-smd: Add PM8916 support Date: Fri, 11 Dec 2015 00:01:33 -0600 [thread overview] Message-ID: <1449813694-11211-2-git-send-email-andy.gross@linaro.org> (raw) In-Reply-To: <1449813694-11211-1-git-send-email-andy.gross@linaro.org> From: Andy Gross <agross@codeaurora.org> This patch adds support and documentation for the PM8916 regulators found on MSM8916 platforms. Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org> --- .../bindings/soc/qcom/qcom,smd-rpm-regulator.txt | 18 ++++++ drivers/regulator/qcom_smd-regulator.c | 64 ++++++++++++++++++++++ 2 files changed, 82 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt index 7084474..e74ffe1 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt @@ -17,6 +17,7 @@ Regulator nodes are identified by their compatible: Value type: <string> Definition: must be one of: "qcom,rpm-pm8841-regulators" + "qcom,rpm-pm8916-regulators" "qcom,rpm-pm8941-regulators" - vdd_s1-supply: @@ -35,6 +36,19 @@ Regulator nodes are identified by their compatible: - vdd_s1-supply: - vdd_s2-supply: - vdd_s3-supply: +- vdd_s4-supply: +- vdd_l1_l2_l3-supply: +- vdd_l4_l5_l6-supply: +- vdd_l7-supply: +- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply: + Usage: optional (pm8916 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: - vdd_l1_l3-supply: - vdd_l2_lvs1_2_3-supply: - vdd_l4_l11-supply: @@ -57,6 +71,10 @@ of the pmics below. pm8841: s1, s2, s3, s4, s5, s6, s7, s8 +pm8916: + s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, + l14, l15, l16, l17, l18 + pm8941: s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 6fa0c7d..8464ead 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -211,6 +211,43 @@ static const struct regulator_desc pm8941_switch = { .ops = &rpm_switch_ops, }; +static const struct regulator_desc pm8916_pldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500), + }, + .n_linear_ranges = 1, + .n_voltages = 209, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm8916_nldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(375000, 0, 93, 12500), + }, + .n_linear_ranges = 1, + .n_voltages = 94, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm8916_buck_lvo_smps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), + REGULATOR_LINEAR_RANGE(750000, 96, 127, 25000), + }, + .n_linear_ranges = 2, + .n_voltages = 128, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm8916_buck_hvo_smps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(1550000, 0, 31, 25000), + }, + .n_linear_ranges = 1, + .n_voltages = 32, + .ops = &rpm_smps_ldo_ops, +}; + struct rpm_regulator_data { const char *name; u32 type; @@ -231,6 +268,32 @@ static const struct rpm_regulator_data rpm_pm8841_regulators[] = { {} }; +static const struct rpm_regulator_data rpm_pm8916_regulators[] = { + { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8916_buck_lvo_smps, "vdd_s1" }, + { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8916_buck_lvo_smps, "vdd_s2" }, + { "s3", QCOM_SMD_RPM_SMPA, 3, &pm8916_buck_lvo_smps, "vdd_s3" }, + { "s4", QCOM_SMD_RPM_SMPA, 4, &pm8916_buck_hvo_smps, "vdd_s4" }, + { "l1", QCOM_SMD_RPM_LDOA, 1, &pm8916_nldo, "vdd_l1_l2_l3" }, + { "l2", QCOM_SMD_RPM_LDOA, 2, &pm8916_nldo, "vdd_l1_l2_l3" }, + { "l3", QCOM_SMD_RPM_LDOA, 3, &pm8916_nldo, "vdd_l1_l2_l3" }, + { "l4", QCOM_SMD_RPM_LDOA, 4, &pm8916_pldo, "vdd_l4_l5_l6" }, + { "l5", QCOM_SMD_RPM_LDOA, 5, &pm8916_pldo, "vdd_l4_l5_l6" }, + { "l6", QCOM_SMD_RPM_LDOA, 6, &pm8916_pldo, "vdd_l4_l5_l6" }, + { "l7", QCOM_SMD_RPM_LDOA, 7, &pm8916_pldo, "vdd_l7" }, + { "l8", QCOM_SMD_RPM_LDOA, 8, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" }, + { "l9", QCOM_SMD_RPM_LDOA, 9, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" }, + { "l10", QCOM_SMD_RPM_LDOA, 10, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l11", QCOM_SMD_RPM_LDOA, 11, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l12", QCOM_SMD_RPM_LDOA, 12, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l13", QCOM_SMD_RPM_LDOA, 13, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l14", QCOM_SMD_RPM_LDOA, 14, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l15", QCOM_SMD_RPM_LDOA, 15, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l16", QCOM_SMD_RPM_LDOA, 16, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l17", QCOM_SMD_RPM_LDOA, 17, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l18", QCOM_SMD_RPM_LDOA, 18, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + {} +}; + static const struct rpm_regulator_data rpm_pm8941_regulators[] = { { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8x41_hfsmps, "vdd_s1" }, { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8x41_hfsmps, "vdd_s2" }, @@ -274,6 +337,7 @@ static const struct rpm_regulator_data rpm_pm8941_regulators[] = { static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators }, + { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators }, { .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators }, {} }; -- 1.9.1
next prev parent reply other threads:[~2015-12-11 6:01 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-12-11 6:01 [Resend 0/2] Add support for APQ8084 and MSM8916 Regulators Andy Gross 2015-12-11 6:01 ` Andy Gross 2015-12-11 6:01 ` Andy Gross [this message] 2015-12-11 6:01 ` [Resend 1/2] regulator: qcom-smd: Add PM8916 support Andy Gross 2015-12-11 6:01 ` [Resend 2/2] regulator: qcom-smd: Add support for PMA8084 Andy Gross 2015-12-11 6:01 ` Andy Gross 2015-12-12 23:00 ` [Resend 0/2] Add support for APQ8084 and MSM8916 Regulators Mark Brown 2015-12-12 23:00 ` Mark Brown 2015-12-13 5:07 ` Andy Gross 2015-12-13 5:07 ` Andy Gross
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1449813694-11211-2-git-send-email-andy.gross@linaro.org \ --to=andy.gross@linaro.org \ --cc=agross@codeaurora.org \ --cc=bjorn.andersson@sonymobile.com \ --cc=broonie@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.