From: Pankaj Dubey <pankaj.dubey@samsung.com> To: linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: kgene.kim@samsung.com, k.kozlowski@samsung.com, thomas.ab@samsung.com, p.fedin@samsung.com, andi.shyti@samsung.com, Pankaj Dubey <pankaj.dubey@samsung.com>, Kukjin Kim <kgene@kernel.org> Subject: [RESEND PATCH v5 8/8] ARM: EXYNOS: Remove SROM related register settings from mach-exynos Date: Sat, 12 Dec 2015 13:14:02 +0530 [thread overview] Message-ID: <1449906242-20843-9-git-send-email-pankaj.dubey@samsung.com> (raw) In-Reply-To: <1449906242-20843-1-git-send-email-pankaj.dubey@samsung.com> As now we have dedicated driver for SROM controller, it will take care of saving register banks during S2R so we can safely remove these settings from mach-exynos. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> --- arch/arm/mach-exynos/Kconfig | 2 ++ arch/arm/mach-exynos/exynos.c | 17 --------- arch/arm/mach-exynos/include/mach/map.h | 3 -- arch/arm/mach-exynos/regs-srom.h | 53 ---------------------------- arch/arm/mach-exynos/suspend.c | 20 ++--------- arch/arm/plat-samsung/include/plat/map-s5p.h | 1 - 6 files changed, 4 insertions(+), 92 deletions(-) delete mode 100644 arch/arm/mach-exynos/regs-srom.h diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 3a10f1a..83c85f5 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -16,6 +16,7 @@ menuconfig ARCH_EXYNOS select ARM_GIC select COMMON_CLK_SAMSUNG select EXYNOS_THERMAL + select EXYNOS_SROM if PM select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -24,6 +25,7 @@ menuconfig ARCH_EXYNOS select PINCTRL_EXYNOS select PM_GENERIC_DOMAINS if PM select S5P_DEV_MFC + select SOC_SAMSUNG select SRAM select THERMAL select MFD_SYSCON diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 524aa6f..4ffb90e 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -37,11 +37,6 @@ void __iomem *pmu_base_addr; static struct map_desc exynos4_iodesc[] __initdata = { { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), .length = SZ_128K, @@ -64,15 +59,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { }, }; -static struct map_desc exynos5_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - static struct platform_device exynos_cpuidle = { .name = "exynos_cpuidle", #ifdef CONFIG_ARM_EXYNOS_CPUIDLE @@ -144,9 +130,6 @@ static void __init exynos_map_io(void) { if (soc_is_exynos4()) iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); - - if (soc_is_exynos5()) - iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); } static void __init exynos_init_io(void) diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 86d8085..351e839 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -32,7 +32,4 @@ #define EXYNOS4_PA_COREPERI 0x10500000 #define EXYNOS4_PA_L2CC 0x10502000 -#define EXYNOS4_PA_SROMC 0x12570000 -#define EXYNOS5_PA_SROMC 0x12250000 - #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-exynos/regs-srom.h b/arch/arm/mach-exynos/regs-srom.h deleted file mode 100644 index 5c4d442..0000000 --- a/arch/arm/mach-exynos/regs-srom.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P SROMC register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_SAMSUNG_REGS_SROM_H -#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__ - -#include <mach/map.h> - -#define S5P_SROMREG(x) (S5P_VA_SROMC + (x)) - -#define S5P_SROM_BW S5P_SROMREG(0x0) -#define S5P_SROM_BC0 S5P_SROMREG(0x4) -#define S5P_SROM_BC1 S5P_SROMREG(0x8) -#define S5P_SROM_BC2 S5P_SROMREG(0xc) -#define S5P_SROM_BC3 S5P_SROMREG(0x10) -#define S5P_SROM_BC4 S5P_SROMREG(0x14) -#define S5P_SROM_BC5 S5P_SROMREG(0x18) - -/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */ - -#define S5P_SROM_BW__DATAWIDTH__SHIFT 0 -#define S5P_SROM_BW__ADDRMODE__SHIFT 1 -#define S5P_SROM_BW__WAITENABLE__SHIFT 2 -#define S5P_SROM_BW__BYTEENABLE__SHIFT 3 - -#define S5P_SROM_BW__CS_MASK 0xf - -#define S5P_SROM_BW__NCS0__SHIFT 0 -#define S5P_SROM_BW__NCS1__SHIFT 4 -#define S5P_SROM_BW__NCS2__SHIFT 8 -#define S5P_SROM_BW__NCS3__SHIFT 12 -#define S5P_SROM_BW__NCS4__SHIFT 16 -#define S5P_SROM_BW__NCS5__SHIFT 20 - -/* applies to same to BCS0 - BCS3 */ - -#define S5P_SROM_BCX__PMC__SHIFT 0 -#define S5P_SROM_BCX__TACP__SHIFT 4 -#define S5P_SROM_BCX__TCAH__SHIFT 8 -#define S5P_SROM_BCX__TCOH__SHIFT 12 -#define S5P_SROM_BCX__TACC__SHIFT 16 -#define S5P_SROM_BCX__TCOS__SHIFT 24 -#define S5P_SROM_BCX__TACS__SHIFT 28 - -#endif /* __PLAT_SAMSUNG_REGS_SROM_H */ diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index c169cc3..237653e 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -32,12 +32,13 @@ #include <asm/smp_scu.h> #include <asm/suspend.h> +#include <mach/map.h> + #include <plat/pm-common.h> #include "common.h" #include "exynos-pmu.h" #include "regs-pmu.h" -#include "regs-srom.h" #define REG_TABLE_END (-1U) @@ -53,15 +54,6 @@ struct exynos_wkup_irq { u32 mask; }; -static struct sleep_save exynos_core_save[] = { - /* SROM side */ - SAVE_ITEM(S5P_SROM_BW), - SAVE_ITEM(S5P_SROM_BC0), - SAVE_ITEM(S5P_SROM_BC1), - SAVE_ITEM(S5P_SROM_BC2), - SAVE_ITEM(S5P_SROM_BC3), -}; - struct exynos_pm_data { const struct exynos_wkup_irq *wkup_irq; unsigned int wake_disable_mask; @@ -343,8 +335,6 @@ static void exynos_pm_prepare(void) /* Set wake-up mask registers */ exynos_pm_set_wakeup_mask(); - s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - exynos_pm_enter_sleep_mode(); /* ensure at least INFORM0 has the resume address */ @@ -375,8 +365,6 @@ static void exynos5420_pm_prepare(void) /* Set wake-up mask registers */ exynos_pm_set_wakeup_mask(); - s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - exynos_pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3); /* * The cpu state needs to be saved and restored so that the @@ -467,8 +455,6 @@ static void exynos_pm_resume(void) /* For release retention */ exynos_pm_release_retention(); - s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (cpuid == ARM_CPU_PART_CORTEX_A9) scu_enable(S5P_VA_SCU); @@ -535,8 +521,6 @@ static void exynos5420_pm_resume(void) pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3); - s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - early_wakeup: tmp = pmu_raw_readl(EXYNOS5420_SFR_AXI_CGDIS1); diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h index f5cf2bd..e555769 100644 --- a/arch/arm/plat-samsung/include/plat/map-s5p.h +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h @@ -18,7 +18,6 @@ #define S5P_VA_DMC0 S3C_ADDR(0x02440000) #define S5P_VA_DMC1 S3C_ADDR(0x02480000) -#define S5P_VA_SROMC S3C_ADDR(0x024C0000) #define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000) #define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x)) -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: pankaj.dubey@samsung.com (Pankaj Dubey) To: linux-arm-kernel@lists.infradead.org Subject: [RESEND PATCH v5 8/8] ARM: EXYNOS: Remove SROM related register settings from mach-exynos Date: Sat, 12 Dec 2015 13:14:02 +0530 [thread overview] Message-ID: <1449906242-20843-9-git-send-email-pankaj.dubey@samsung.com> (raw) In-Reply-To: <1449906242-20843-1-git-send-email-pankaj.dubey@samsung.com> As now we have dedicated driver for SROM controller, it will take care of saving register banks during S2R so we can safely remove these settings from mach-exynos. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> --- arch/arm/mach-exynos/Kconfig | 2 ++ arch/arm/mach-exynos/exynos.c | 17 --------- arch/arm/mach-exynos/include/mach/map.h | 3 -- arch/arm/mach-exynos/regs-srom.h | 53 ---------------------------- arch/arm/mach-exynos/suspend.c | 20 ++--------- arch/arm/plat-samsung/include/plat/map-s5p.h | 1 - 6 files changed, 4 insertions(+), 92 deletions(-) delete mode 100644 arch/arm/mach-exynos/regs-srom.h diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 3a10f1a..83c85f5 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -16,6 +16,7 @@ menuconfig ARCH_EXYNOS select ARM_GIC select COMMON_CLK_SAMSUNG select EXYNOS_THERMAL + select EXYNOS_SROM if PM select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -24,6 +25,7 @@ menuconfig ARCH_EXYNOS select PINCTRL_EXYNOS select PM_GENERIC_DOMAINS if PM select S5P_DEV_MFC + select SOC_SAMSUNG select SRAM select THERMAL select MFD_SYSCON diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 524aa6f..4ffb90e 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -37,11 +37,6 @@ void __iomem *pmu_base_addr; static struct map_desc exynos4_iodesc[] __initdata = { { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), .length = SZ_128K, @@ -64,15 +59,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { }, }; -static struct map_desc exynos5_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - static struct platform_device exynos_cpuidle = { .name = "exynos_cpuidle", #ifdef CONFIG_ARM_EXYNOS_CPUIDLE @@ -144,9 +130,6 @@ static void __init exynos_map_io(void) { if (soc_is_exynos4()) iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); - - if (soc_is_exynos5()) - iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); } static void __init exynos_init_io(void) diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 86d8085..351e839 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -32,7 +32,4 @@ #define EXYNOS4_PA_COREPERI 0x10500000 #define EXYNOS4_PA_L2CC 0x10502000 -#define EXYNOS4_PA_SROMC 0x12570000 -#define EXYNOS5_PA_SROMC 0x12250000 - #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-exynos/regs-srom.h b/arch/arm/mach-exynos/regs-srom.h deleted file mode 100644 index 5c4d442..0000000 --- a/arch/arm/mach-exynos/regs-srom.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P SROMC register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_SAMSUNG_REGS_SROM_H -#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__ - -#include <mach/map.h> - -#define S5P_SROMREG(x) (S5P_VA_SROMC + (x)) - -#define S5P_SROM_BW S5P_SROMREG(0x0) -#define S5P_SROM_BC0 S5P_SROMREG(0x4) -#define S5P_SROM_BC1 S5P_SROMREG(0x8) -#define S5P_SROM_BC2 S5P_SROMREG(0xc) -#define S5P_SROM_BC3 S5P_SROMREG(0x10) -#define S5P_SROM_BC4 S5P_SROMREG(0x14) -#define S5P_SROM_BC5 S5P_SROMREG(0x18) - -/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */ - -#define S5P_SROM_BW__DATAWIDTH__SHIFT 0 -#define S5P_SROM_BW__ADDRMODE__SHIFT 1 -#define S5P_SROM_BW__WAITENABLE__SHIFT 2 -#define S5P_SROM_BW__BYTEENABLE__SHIFT 3 - -#define S5P_SROM_BW__CS_MASK 0xf - -#define S5P_SROM_BW__NCS0__SHIFT 0 -#define S5P_SROM_BW__NCS1__SHIFT 4 -#define S5P_SROM_BW__NCS2__SHIFT 8 -#define S5P_SROM_BW__NCS3__SHIFT 12 -#define S5P_SROM_BW__NCS4__SHIFT 16 -#define S5P_SROM_BW__NCS5__SHIFT 20 - -/* applies to same to BCS0 - BCS3 */ - -#define S5P_SROM_BCX__PMC__SHIFT 0 -#define S5P_SROM_BCX__TACP__SHIFT 4 -#define S5P_SROM_BCX__TCAH__SHIFT 8 -#define S5P_SROM_BCX__TCOH__SHIFT 12 -#define S5P_SROM_BCX__TACC__SHIFT 16 -#define S5P_SROM_BCX__TCOS__SHIFT 24 -#define S5P_SROM_BCX__TACS__SHIFT 28 - -#endif /* __PLAT_SAMSUNG_REGS_SROM_H */ diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index c169cc3..237653e 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -32,12 +32,13 @@ #include <asm/smp_scu.h> #include <asm/suspend.h> +#include <mach/map.h> + #include <plat/pm-common.h> #include "common.h" #include "exynos-pmu.h" #include "regs-pmu.h" -#include "regs-srom.h" #define REG_TABLE_END (-1U) @@ -53,15 +54,6 @@ struct exynos_wkup_irq { u32 mask; }; -static struct sleep_save exynos_core_save[] = { - /* SROM side */ - SAVE_ITEM(S5P_SROM_BW), - SAVE_ITEM(S5P_SROM_BC0), - SAVE_ITEM(S5P_SROM_BC1), - SAVE_ITEM(S5P_SROM_BC2), - SAVE_ITEM(S5P_SROM_BC3), -}; - struct exynos_pm_data { const struct exynos_wkup_irq *wkup_irq; unsigned int wake_disable_mask; @@ -343,8 +335,6 @@ static void exynos_pm_prepare(void) /* Set wake-up mask registers */ exynos_pm_set_wakeup_mask(); - s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - exynos_pm_enter_sleep_mode(); /* ensure at least INFORM0 has the resume address */ @@ -375,8 +365,6 @@ static void exynos5420_pm_prepare(void) /* Set wake-up mask registers */ exynos_pm_set_wakeup_mask(); - s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - exynos_pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3); /* * The cpu state needs to be saved and restored so that the @@ -467,8 +455,6 @@ static void exynos_pm_resume(void) /* For release retention */ exynos_pm_release_retention(); - s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (cpuid == ARM_CPU_PART_CORTEX_A9) scu_enable(S5P_VA_SCU); @@ -535,8 +521,6 @@ static void exynos5420_pm_resume(void) pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3); - s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - early_wakeup: tmp = pmu_raw_readl(EXYNOS5420_SFR_AXI_CGDIS1); diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h index f5cf2bd..e555769 100644 --- a/arch/arm/plat-samsung/include/plat/map-s5p.h +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h @@ -18,7 +18,6 @@ #define S5P_VA_DMC0 S3C_ADDR(0x02440000) #define S5P_VA_DMC1 S3C_ADDR(0x02480000) -#define S5P_VA_SROMC S3C_ADDR(0x024C0000) #define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000) #define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x)) -- 1.9.1
next prev parent reply other threads:[~2015-12-12 7:48 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-12-12 7:43 [RESEND PATCH v5 0/8] Add support for Exynos SROM Controller driver Pankaj Dubey 2015-12-12 7:43 ` Pankaj Dubey 2015-12-12 7:43 ` [RESEND PATCH v5 1/8] ARM: EXYNOS: remove unused static mapping of CMU for exynos5 Pankaj Dubey 2015-12-12 7:43 ` Pankaj Dubey 2015-12-12 7:43 ` [RESEND PATCH v5 2/8] ARM: EXYNOS: code cleanup in map.h Pankaj Dubey 2015-12-12 7:43 ` Pankaj Dubey 2015-12-12 7:43 ` [RESEND PATCH v5 3/8] dt-bindings: add exynos-srom device tree binding Pankaj Dubey 2015-12-12 7:43 ` Pankaj Dubey 2015-12-12 7:43 ` Pankaj Dubey 2015-12-12 7:43 ` [RESEND PATCH v5 4/8] ARM: dts: add SROM device node for exynos4 Pankaj Dubey 2015-12-12 7:43 ` Pankaj Dubey 2015-12-12 7:43 ` [RESEND PATCH v5 5/8] ARM: dts: add SROM device node for exynos5 Pankaj Dubey 2015-12-12 7:43 ` Pankaj Dubey 2015-12-12 7:44 ` [RESEND PATCH v5 6/8] drivers: soc: add support for exynos SROM driver Pankaj Dubey 2015-12-12 7:44 ` Pankaj Dubey 2015-12-12 7:44 ` [RESEND PATCH v5 7/8] MAINTAINERS: add maintainers entry for drivers/soc/samsung Pankaj Dubey 2015-12-12 7:44 ` Pankaj Dubey 2015-12-12 7:44 ` Pankaj Dubey [this message] 2015-12-12 7:44 ` [RESEND PATCH v5 8/8] ARM: EXYNOS: Remove SROM related register settings from mach-exynos Pankaj Dubey 2015-12-14 7:39 ` [RESEND PATCH v5 0/8] Add support for Exynos SROM Controller driver Pavel Fedin 2015-12-14 7:39 ` Pavel Fedin 2015-12-17 5:14 ` Krzysztof Kozlowski 2015-12-17 5:14 ` Krzysztof Kozlowski 2015-12-18 3:39 ` pankaj.dubey 2015-12-18 3:39 ` pankaj.dubey
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1449906242-20843-9-git-send-email-pankaj.dubey@samsung.com \ --to=pankaj.dubey@samsung.com \ --cc=andi.shyti@samsung.com \ --cc=k.kozlowski@samsung.com \ --cc=kgene.kim@samsung.com \ --cc=kgene@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=p.fedin@samsung.com \ --cc=thomas.ab@samsung.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.