From: Kishon Vijay Abraham I <kishon@ti.com>
To: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>, <tony@atomide.com>
Cc: <bcousson@baylibre.com>, <kishon@ti.com>, <robh+dt@kernel.org>,
<pawel.moll@arm.com>, <mark.rutland@arm.com>,
<ijc+devicetree@hellion.org.uk>, <galak@codeaurora.org>,
<linux@arm.linux.org.uk>, <rogerq@ti.com>, <nsekhar@ti.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-pci@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<t-kristo@ti.com>
Subject: [PATCH v3 3/4] ARM: dts: dra7: Use "ti,dra7x-usb2-phy2" compatible string for USB2 PHY2
Date: Tue, 15 Dec 2015 15:09:05 +0530 [thread overview]
Message-ID: <1450172346-11890-4-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1450172346-11890-1-git-send-email-kishon@ti.com>
The USB2 PHY2 has a different register map compared to USB2 PHY1
to power on/off the PHY. In order to handle it, use the new compatible
string "ti,dra7x-usb2-phy2" for the second instance of USB2 PHY.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 156d735..41545f9 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1299,7 +1299,8 @@
};
usb2_phy2: phy@4a085000 {
- compatible = "ti,omap-usb2";
+ compatible = "ti,dra7x-usb2-phy2",
+ "ti,omap-usb2";
reg = <0x4a085000 0x400>;
ctrl-module = <&omap_control_usb2phy2>;
clocks = <&usb_phy2_always_on_clk32k>,
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-omap@vger.kernel.org, tony@atomide.com
Cc: bcousson@baylibre.com, kishon@ti.com, robh+dt@kernel.org,
pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
linux@arm.linux.org.uk, rogerq@ti.com, nsekhar@ti.com,
linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org,
linux-usb@vger.kernel.org, t-kristo@ti.com
Subject: [PATCH v3 3/4] ARM: dts: dra7: Use "ti,dra7x-usb2-phy2" compatible string for USB2 PHY2
Date: Tue, 15 Dec 2015 15:09:05 +0530 [thread overview]
Message-ID: <1450172346-11890-4-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1450172346-11890-1-git-send-email-kishon@ti.com>
The USB2 PHY2 has a different register map compared to USB2 PHY1
to power on/off the PHY. In order to handle it, use the new compatible
string "ti,dra7x-usb2-phy2" for the second instance of USB2 PHY.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 156d735..41545f9 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1299,7 +1299,8 @@
};
usb2_phy2: phy@4a085000 {
- compatible = "ti,omap-usb2";
+ compatible = "ti,dra7x-usb2-phy2",
+ "ti,omap-usb2";
reg = <0x4a085000 0x400>;
ctrl-module = <&omap_control_usb2phy2>;
clocks = <&usb_phy2_always_on_clk32k>,
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/4] ARM: dts: dra7: Use "ti, dra7x-usb2-phy2" compatible string for USB2 PHY2
Date: Tue, 15 Dec 2015 15:09:05 +0530 [thread overview]
Message-ID: <1450172346-11890-4-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1450172346-11890-1-git-send-email-kishon@ti.com>
The USB2 PHY2 has a different register map compared to USB2 PHY1
to power on/off the PHY. In order to handle it, use the new compatible
string "ti,dra7x-usb2-phy2" for the second instance of USB2 PHY.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 156d735..41545f9 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1299,7 +1299,8 @@
};
usb2_phy2: phy at 4a085000 {
- compatible = "ti,omap-usb2";
+ compatible = "ti,dra7x-usb2-phy2",
+ "ti,omap-usb2";
reg = <0x4a085000 0x400>;
ctrl-module = <&omap_control_usb2phy2>;
clocks = <&usb_phy2_always_on_clk32k>,
--
1.7.9.5
next prev parent reply other threads:[~2015-12-15 9:41 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 9:39 [PATCH v3 0/4] ARM: dts: use syscon property instead of ctrl-module Kishon Vijay Abraham I
2015-12-15 9:39 ` Kishon Vijay Abraham I
2015-12-15 9:39 ` Kishon Vijay Abraham I
2015-12-15 9:39 ` [PATCH v3 1/4] ARM: dts: dra7: Add dt node for the sycon pcie Kishon Vijay Abraham I
2015-12-15 9:39 ` Kishon Vijay Abraham I
2015-12-15 9:39 ` Kishon Vijay Abraham I
2015-12-15 13:22 ` Sergei Shtylyov
2015-12-15 13:22 ` Sergei Shtylyov
2015-12-15 13:22 ` Sergei Shtylyov
2015-12-18 10:21 ` Kishon Vijay Abraham I
2015-12-18 10:21 ` Kishon Vijay Abraham I
2015-12-18 10:21 ` Kishon Vijay Abraham I
2015-12-18 11:32 ` Sergei Shtylyov
2015-12-18 11:32 ` Sergei Shtylyov
2015-12-18 11:32 ` Sergei Shtylyov
2015-12-15 9:39 ` [PATCH v3 2/4] ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY node Kishon Vijay Abraham I
2015-12-15 9:39 ` Kishon Vijay Abraham I
2015-12-15 9:39 ` Kishon Vijay Abraham I
2015-12-15 9:39 ` Kishon Vijay Abraham I [this message]
2015-12-15 9:39 ` [PATCH v3 3/4] ARM: dts: dra7: Use "ti, dra7x-usb2-phy2" compatible string for USB2 PHY2 Kishon Vijay Abraham I
2015-12-15 9:39 ` [PATCH v3 3/4] ARM: dts: dra7: Use "ti,dra7x-usb2-phy2" " Kishon Vijay Abraham I
2015-12-15 9:39 ` [PATCH v3 4/4] ARM: dts: <am4372/dra7/omap5>: Use "syscon-phy-power" instead of "ctrl-module" Kishon Vijay Abraham I
2015-12-15 9:39 ` Kishon Vijay Abraham I
2015-12-15 9:39 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450172346-11890-4-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.