From: Andre Przywara <andre.przywara@arm.com> To: rob.herring@linaro.org, Pawel Moll <pawel.moll@arm.com>, ijc+devicetree@hellion.org.uk, marc.zyngier@arm.com Cc: catalin.marinas@arm.com, will.deacon@arm.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Kumar Gala <galak@codeaurora.org> Subject: [PATCH v2 4/4] arm64: dts: add .dts for GICv3 Foundation model Date: Tue, 15 Dec 2015 13:36:38 +0000 [thread overview] Message-ID: <1450186598-24504-5-git-send-email-andre.przywara@arm.com> (raw) In-Reply-To: <1450186598-24504-1-git-send-email-andre.przywara@arm.com> The ARMv8 Foundation model sports a command line parameter to use a GICv3 emulation instead of the default GICv2 interrupt controller. Add a new .dts file which reuses most of the definitions of the existing model while just adding the required properties for the GICv3 node. This allows the public Foundation model to run with a GICv3. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm64/boot/dts/arm/Makefile | 2 +- arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts | 30 +++++++++++++++++++++++++ 2 files changed, 31 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index bb3c072..46d342d 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,4 +1,4 @@ -dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb foundation-v8-gicv3.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts new file mode 100644 index 0000000..35588df --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts @@ -0,0 +1,30 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (GICv3 configuration) + */ + +#include "foundation-v8.dtsi" + +/ { + gic: interrupt-controller@2f000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + reg = <0x0 0x2f000000 0x0 0x10000>, + <0x0 0x2f100000 0x0 0x200000>, + <0x0 0x2c000000 0x0 0x2000>, + <0x0 0x2c010000 0x0 0x2000>, + <0x0 0x2c02f000 0x0 0x2000>; + interrupts = <1 9 4>; + + its: its@2f020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x2f020000 0x0 0x20000>; + }; + }; +}; -- 2.5.1
WARNING: multiple messages have this Message-ID (diff)
From: andre.przywara@arm.com (Andre Przywara) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 4/4] arm64: dts: add .dts for GICv3 Foundation model Date: Tue, 15 Dec 2015 13:36:38 +0000 [thread overview] Message-ID: <1450186598-24504-5-git-send-email-andre.przywara@arm.com> (raw) In-Reply-To: <1450186598-24504-1-git-send-email-andre.przywara@arm.com> The ARMv8 Foundation model sports a command line parameter to use a GICv3 emulation instead of the default GICv2 interrupt controller. Add a new .dts file which reuses most of the definitions of the existing model while just adding the required properties for the GICv3 node. This allows the public Foundation model to run with a GICv3. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm64/boot/dts/arm/Makefile | 2 +- arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts | 30 +++++++++++++++++++++++++ 2 files changed, 31 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index bb3c072..46d342d 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,4 +1,4 @@ -dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb foundation-v8-gicv3.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts new file mode 100644 index 0000000..35588df --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts @@ -0,0 +1,30 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (GICv3 configuration) + */ + +#include "foundation-v8.dtsi" + +/ { + gic: interrupt-controller at 2f000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + reg = <0x0 0x2f000000 0x0 0x10000>, + <0x0 0x2f100000 0x0 0x200000>, + <0x0 0x2c000000 0x0 0x2000>, + <0x0 0x2c010000 0x0 0x2000>, + <0x0 0x2c02f000 0x0 0x2000>; + interrupts = <1 9 4>; + + its: its at 2f020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x2f020000 0x0 0x20000>; + }; + }; +}; -- 2.5.1
next prev parent reply other threads:[~2015-12-15 13:37 UTC|newest] Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-12-15 13:36 [PATCH v2 0/4] add support for GICv3 on the Foundation model Andre Przywara 2015-12-15 13:36 ` Andre Przywara 2015-12-15 13:36 ` [PATCH v2 1/4] arm64: dts: prepare foundation-v8.dts to cope with GICv3 Andre Przywara 2015-12-15 13:36 ` Andre Przywara 2015-12-15 13:36 ` [PATCH v2 2/4] arm64: dts: Foundation model: increase GICC region to allow EOImode=1 Andre Przywara 2015-12-15 13:36 ` Andre Przywara 2015-12-15 15:52 ` Marc Zyngier 2015-12-15 15:52 ` Marc Zyngier 2015-12-15 15:52 ` Marc Zyngier 2015-12-15 13:36 ` [PATCH v2 3/4] arm64: dts: split Foundation model dts to put the GIC separately Andre Przywara 2015-12-15 13:36 ` Andre Przywara 2015-12-15 13:36 ` Andre Przywara [this message] 2015-12-15 13:36 ` [PATCH v2 4/4] arm64: dts: add .dts for GICv3 Foundation model Andre Przywara
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1450186598-24504-5-git-send-email-andre.przywara@arm.com \ --to=andre.przywara@arm.com \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=galak@codeaurora.org \ --cc=ijc+devicetree@hellion.org.uk \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=marc.zyngier@arm.com \ --cc=pawel.moll@arm.com \ --cc=rob.herring@linaro.org \ --cc=will.deacon@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.