All of lore.kernel.org
 help / color / mirror / Atom feed
From: libin.yang@linux.intel.com
To: alsa-devel@alsa-project.org, tiwai@suse.de
Cc: libin.yang@intel.com, mengdong.lin@intel.com,
	Libin Yang <libin.yang@linux.intel.com>
Subject: [PATCH v5 1/2] ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug
Date: Wed, 16 Dec 2015 16:48:15 +0800	[thread overview]
Message-ID: <1450255696-105171-1-git-send-email-libin.yang@linux.intel.com> (raw)

From: Libin Yang <libin.yang@linux.intel.com>

Dynamically bind/unbind the PCM to pin when HDMI/DP monitor hotplug.

When monitor is connected, find a proper PCM for the monitor.
When monitor is disconnected, unbind the PCM from the pin.

The binding policy (use Intel platform as example) is:
1. Try to use the legacy pin-pcm mapping for the device entry 0
   of the pin.
2. If step 1 fails, try to bind pin to the backup PCMs. For example,
   on Intel platform, if DP MST is enabled, 5 PCMs will be created.
   PCM 3, PCM 7, PCM 8 are supposed to be used by device entry 0 of
   pin 5, pin 6 and pin 7. PCM 9 and PCM 10 are the backup PCMs.
3. If step 2 fails, try to find any PCM to bind to the pin.

Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
---
 sound/pci/hda/patch_hdmi.c | 82 ++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 80 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 19bf782..56b7625 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -73,6 +73,8 @@ struct hdmi_spec_per_cvt {
 
 struct hdmi_spec_per_pin {
 	hda_nid_t pin_nid;
+	/* pin idx, different device entries on the same pin use the same idx */
+	int pin_nid_idx;
 	int num_mux_nids;
 	hda_nid_t mux_nids[HDA_MAX_CONNECTIONS];
 	int mux_idx;
@@ -85,6 +87,7 @@ struct hdmi_spec_per_pin {
 	struct snd_kcontrol *eld_ctl;
 	struct snd_jack *acomp_jack; /* jack via audio component */
 	struct hda_pcm *pcm; /* pointer to spec->pcm_rec[n] dynamically*/
+	int pcm_idx; /* which pcm is attached. -1 means no pcm is attached */
 	int repoll_count;
 	bool setup; /* the stream has been set up by prepare callback */
 	int channels; /* current number of channels */
@@ -138,6 +141,8 @@ struct hdmi_spec {
 	struct snd_array pins; /* struct hdmi_spec_per_pin */
 	struct hda_pcm *pcm_rec[16];
 	struct mutex pcm_lock;
+	/* pcm_bitmap means which pcms have been assigned to pins*/
+	unsigned long pcm_bitmap;
 	int pcm_used;	/* counter of pcm_rec[] */
 	unsigned int channels_max; /* max over all cvts */
 
@@ -1671,6 +1676,60 @@ static int hdmi_read_pin_conn(struct hda_codec *codec, int pin_idx)
 	return 0;
 }
 
+static int hdmi_find_pcm_slot(struct hdmi_spec *spec,
+				struct hdmi_spec_per_pin *per_pin)
+{
+	int i;
+
+	/* try the prefer PCM */
+	if (!test_bit(per_pin->pin_nid_idx, &spec->pcm_bitmap))
+		return per_pin->pin_nid_idx;
+
+	/* have a second try; check the "reserved area" over num_pins */
+	for (i = spec->num_pins; i < spec->pcm_used; i++) {
+		if (!test_bit(i, &spec->pcm_bitmap))
+			return i;
+	}
+
+	/* the last try; check the empty slots in pins */
+	for (i = 0; i < spec->num_pins; i++) {
+		if (!test_bit(i, &spec->pcm_bitmap))
+			return i;
+	}
+	return -EBUSY;
+}
+
+static void hdmi_attach_hda_pcm(struct hdmi_spec *spec,
+				struct hdmi_spec_per_pin *per_pin)
+{
+	int idx;
+
+	/* pcm already be attached to the pin */
+	if (per_pin->pcm)
+		return;
+	idx = hdmi_find_pcm_slot(spec, per_pin);
+	if (idx == -ENODEV)
+		return;
+	per_pin->pcm_idx = idx;
+	per_pin->pcm = spec->pcm_rec[idx];
+	set_bit(idx, &spec->pcm_bitmap);
+}
+
+static void hdmi_detach_hda_pcm(struct hdmi_spec *spec,
+				struct hdmi_spec_per_pin *per_pin)
+{
+	int idx;
+
+	/* pcm already be detached from the pin */
+	if (!per_pin->pcm)
+		return;
+	idx = per_pin->pcm_idx;
+	per_pin->pcm_idx = -1;
+	per_pin->pcm = NULL;
+	if (idx >= 0 && idx < spec->pcm_used)
+		clear_bit(idx, &spec->pcm_bitmap);
+}
+
 /* update per_pin ELD from the given new ELD;
  * setup info frame and notification accordingly
  */
@@ -1679,9 +1738,17 @@ static void update_eld(struct hda_codec *codec,
 		       struct hdmi_eld *eld)
 {
 	struct hdmi_eld *pin_eld = &per_pin->sink_eld;
+	struct hdmi_spec *spec = codec->spec;
 	bool old_eld_valid = pin_eld->eld_valid;
 	bool eld_changed;
 
+	if (spec->dyn_pcm_assign) {
+		if (eld->eld_valid)
+			hdmi_attach_hda_pcm(spec, per_pin);
+		else
+			hdmi_detach_hda_pcm(spec, per_pin);
+	}
+
 	if (eld->eld_valid)
 		snd_hdmi_show_eld(codec, &eld->info);
 
@@ -1825,13 +1892,19 @@ static void sync_eld_via_acomp(struct hda_codec *codec,
 static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
 {
 	struct hda_codec *codec = per_pin->codec;
+	struct hdmi_spec *spec = codec->spec;
+	int ret;
 
+	mutex_lock(&spec->pcm_lock);
 	if (codec_has_acomp(codec)) {
 		sync_eld_via_acomp(codec, per_pin);
-		return false; /* don't call snd_hda_jack_report_sync() */
+		ret = false; /* don't call snd_hda_jack_report_sync() */
 	} else {
-		return hdmi_present_sense_via_verbs(per_pin, repoll);
+		ret = hdmi_present_sense_via_verbs(per_pin, repoll);
 	}
+	mutex_unlock(&spec->pcm_lock);
+
+	return ret;
 }
 
 static void hdmi_repoll_eld(struct work_struct *work)
@@ -1875,6 +1948,11 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
 
 	per_pin->pin_nid = pin_nid;
 	per_pin->non_pcm = false;
+	if (spec->dyn_pcm_assign)
+		per_pin->pcm_idx = -1;
+	else
+		per_pin->pcm_idx = pin_idx;
+	per_pin->pin_nid_idx = pin_idx;
 
 	err = hdmi_read_pin_conn(codec, pin_idx);
 	if (err < 0)
-- 
1.9.1

             reply	other threads:[~2015-12-16  8:50 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-16  8:48 libin.yang [this message]
2015-12-16  8:48 ` [PATCH v5 2/2] ALSA: hda - hdmi setup pin when monitor hotplug in pcm dynamic assignment mode libin.yang
2015-12-16 14:28 ` [PATCH v5 1/2] ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450255696-105171-1-git-send-email-libin.yang@linux.intel.com \
    --to=libin.yang@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=libin.yang@intel.com \
    --cc=mengdong.lin@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.