All of lore.kernel.org
 help / color / mirror / Atom feed
From: "João Paulo Rechi Vita" <jprvita@gmail.com>
To: Darren Hart <dvhart@infradead.org>
Cc: "Corentin Chary" <corentin.chary@gmail.com>,
	andy.shevchenko@gmail.com, platform-driver-x86@vger.kernel.org,
	acpi4asus-user@lists.sourceforge.net,
	linux-kernel@vger.kernel.org,
	"João Paulo Rechi Vita" <jprvita@endlessm.com>
Subject: [PATCH 1/2] platform/x86: Add Asus Wireless Radio Control driver
Date: Tue,  5 Jan 2016 08:26:00 -0500	[thread overview]
Message-ID: <1452000361-13640-2-git-send-email-jprvita@endlessm.com> (raw)
In-Reply-To: <1452000361-13640-1-git-send-email-jprvita@endlessm.com>

Some Asus notebooks like the Asus E202SA and the Asus X555UB have a
separate ACPI device for notifications from the airplane mode hotkey.
This device is called "Wireless Radio Control" in Asus websites and ASHS
in the DSDT, and its ACPI _HID is ATK4002 in the two models mentioned
above.

For these models, when the airplane mode hotkey (Fn+F2) is pressed, a
query 0x0B is started in the Embedded Controller, and all this query does
is a notify ASHS with the value 0x88 (for acpi_osi >= "Windows 2012"):

	Scope (_SB.PCI0.SBRG.EC0)
	{
		(...)
		Method (_Q0B, 0, NotSerialized)  // _Qxx: EC Query
		{
			If ((MSOS () >= OSW8))
			{
				Notify (ASHS, 0x88) // Device-Specific
			}
			Else
			{
				(...)
			}
		}
	}

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
---
 MAINTAINERS                          |  6 +++
 drivers/platform/x86/Kconfig         | 15 +++++++
 drivers/platform/x86/Makefile        |  1 +
 drivers/platform/x86/asus-wireless.c | 83 ++++++++++++++++++++++++++++++++++++
 4 files changed, 105 insertions(+)
 create mode 100644 drivers/platform/x86/asus-wireless.c

diff --git a/MAINTAINERS b/MAINTAINERS
index c984136..e1860f2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1791,6 +1791,12 @@ S:	Maintained
 F:	drivers/platform/x86/asus*.c
 F:	drivers/platform/x86/eeepc*.c
 
+ASUS WIRELESS RADIO CONTROL DRIVER
+M:	João Paulo Rechi Vita <jprvita@gmail.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
+F:	drivers/platform/x86/asus-wireless.c
+
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
 R:	Dan Williams <dan.j.williams@intel.com>
 W:	http://sourceforge.net/projects/xscaleiop
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index d0bfcf8..d3a088b 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -587,6 +587,21 @@ config EEEPC_WMI
 	  If you have an ACPI-WMI compatible Eee PC laptop (>= 1000), say Y or M
 	  here.
 
+config ASUS_WIRELESS
+	tristate "Asus Wireless Radio Control Driver"
+	depends on ACPI
+	depends on INPUT
+	default m
+	---help---
+	  The Asus Wireless Radio Control handles the airplane mode hotkey
+	  present on some Asus laptops.
+
+	  Say Y or M here if you have an ASUS notebook with an airplane mode
+	  hotkey.
+
+	  If you choose to compile this driver as a module the module will be
+	  called asus-wireless.
+
 config ACPI_WMI
 	tristate "WMI"
 	depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 4410e91..8b8df29 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_ASUS_LAPTOP)	+= asus-laptop.o
 obj-$(CONFIG_ASUS_WMI)		+= asus-wmi.o
 obj-$(CONFIG_ASUS_NB_WMI)	+= asus-nb-wmi.o
+obj-$(CONFIG_ASUS_WIRELESS)	+= asus-wireless.o
 obj-$(CONFIG_EEEPC_LAPTOP)	+= eeepc-laptop.o
 obj-$(CONFIG_EEEPC_WMI)		+= eeepc-wmi.o
 obj-$(CONFIG_MSI_LAPTOP)	+= msi-laptop.o
diff --git a/drivers/platform/x86/asus-wireless.c b/drivers/platform/x86/asus-wireless.c
new file mode 100644
index 0000000..c7279e9
--- /dev/null
+++ b/drivers/platform/x86/asus-wireless.c
@@ -0,0 +1,83 @@
+/*
+ * Asus Wireless Radio Control Driver
+ *
+ * Copyright (C) 2015-2016 Endless Mobile, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/input.h>
+#include <linux/pci_ids.h>
+
+struct asus_wireless_data {
+	struct input_dev *inputdev;
+};
+
+static void asus_wireless_notify(struct acpi_device *device, u32 event)
+{
+	struct asus_wireless_data *data = acpi_driver_data(device);
+
+	dev_dbg(&device->dev, "event=0x%X\n", event);
+	if (event != 0x88) {
+		dev_notice(&device->dev, "Unknown ASHS event: 0x%X\n", event);
+		return;
+	}
+	input_report_key(data->inputdev, KEY_RFKILL, 1);
+	input_report_key(data->inputdev, KEY_RFKILL, 0);
+	input_sync(data->inputdev);
+}
+
+static int asus_wireless_add(struct acpi_device *device)
+{
+	struct asus_wireless_data *data;
+
+	data = devm_kzalloc(&device->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	device->driver_data = data;
+
+	data->inputdev = devm_input_allocate_device(&device->dev);
+	if (!data->inputdev)
+		return -ENOMEM;
+	data->inputdev->name = "Asus Wireless Radio Control";
+	data->inputdev->phys = "asus-wireless/input0";
+	data->inputdev->id.bustype = BUS_HOST;
+	data->inputdev->id.vendor = PCI_VENDOR_ID_ASUSTEK;
+	set_bit(EV_KEY, data->inputdev->evbit);
+	set_bit(KEY_RFKILL, data->inputdev->keybit);
+	return input_register_device(data->inputdev);
+}
+
+static int asus_wireless_remove(struct acpi_device *device)
+{
+	return 0;
+}
+
+static const struct acpi_device_id device_ids[] = {
+	{"ATK4002", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, device_ids);
+
+static struct acpi_driver asus_wireless_driver = {
+	.name = "Asus Wireless Radio Control Driver",
+	.class = "hotkey",
+	.ids = device_ids,
+	.ops = {
+		.add = asus_wireless_add,
+		.remove = asus_wireless_remove,
+		.notify = asus_wireless_notify,
+	},
+};
+module_acpi_driver(asus_wireless_driver);
+
+MODULE_DESCRIPTION("Asus Wireless Radio Control Driver");
+MODULE_AUTHOR("João Paulo Rechi Vita <jprvita@gmail.com>");
+MODULE_LICENSE("GPL");
-- 
2.5.0


  reply	other threads:[~2016-01-05 13:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-05 13:25 [PATCH 0/2] Asus Wireless Radio Control driver João Paulo Rechi Vita
2016-01-05 13:26 ` João Paulo Rechi Vita [this message]
2016-01-05 13:50   ` [PATCH 1/2] platform/x86: Add " Andy Shevchenko
2016-01-05 16:16     ` [PATCH] " João Paulo Rechi Vita
2016-01-05 17:26       ` Darren Hart
2016-01-05 13:26 ` [PATCH 2/2] asus-wireless: Add ACPI HID ATK4001 João Paulo Rechi Vita
2016-01-05 17:27   ` Darren Hart
2016-01-05 13:58 ` [PATCH 0/2] Asus Wireless Radio Control driver Andy Shevchenko
2016-01-05 16:18   ` João Paulo Rechi Vita
2016-01-05 17:18   ` Darren Hart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1452000361-13640-2-git-send-email-jprvita@endlessm.com \
    --to=jprvita@gmail.com \
    --cc=acpi4asus-user@lists.sourceforge.net \
    --cc=andy.shevchenko@gmail.com \
    --cc=corentin.chary@gmail.com \
    --cc=dvhart@infradead.org \
    --cc=jprvita@endlessm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.