From: Chris Zhong <zyw@rock-chips.com>
To: heiko@sntech.de, linux-rockchip@lists.infradead.org,
mark.yao@rock-chips.com, treding@nvidia.com
Cc: Chris Zhong <zyw@rock-chips.com>,
Russell King <linux@arm.linux.org.uk>,
devicetree@vger.kernel.org, Kumar Gala <galak@codeaurora.org>,
linux-kernel@vger.kernel.org,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 5/5] ARM: dts: rockchip: add support mipi panel tv080wum-nl0
Date: Wed, 6 Jan 2016 12:03:57 +0800 [thread overview]
Message-ID: <1452053038-32098-6-git-send-email-zyw@rock-chips.com> (raw)
In-Reply-To: <1452053038-32098-1-git-send-email-zyw@rock-chips.com>
This tv080wum-nl0 panel is a mipi panel, it can use in MIPI_TX socket
of rk3288 evb board.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v7:
- Move the lcd_en control to act8846 dts
Changes in v6: None
Changes in v5:
- add a blank line befor lcd_en
Changes in v4: None
Changes in v3: None
arch/arm/boot/dts/rk3288-evb-act8846.dts | 2 ++
arch/arm/boot/dts/rk3288-evb.dtsi | 12 +++++++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index e662147..7d5475b 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -50,6 +50,8 @@
gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
+ regulator-always-on;
+ regulator-boot-on;
regulator-name = "vcc_lcd";
vin-supply = <&vcc_io>;
};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 4faabdb..0c91858 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -47,7 +47,7 @@
reg = <0x0 0x80000000>;
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <
0 1 2 3 4 5 6 7
@@ -183,6 +183,16 @@
status = "okay";
};
+&mipi_dsi {
+ status = "okay";
+ panel {
+ compatible ="boe,tv080wum-nl0";
+ reg = <0>;
+ backlight = <&backlight>;
+ status = "okay";
+ };
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
--
2.6.3
WARNING: multiple messages have this Message-ID (diff)
From: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
mark.yao-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org
Cc: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v7 5/5] ARM: dts: rockchip: add support mipi panel tv080wum-nl0
Date: Wed, 6 Jan 2016 12:03:57 +0800 [thread overview]
Message-ID: <1452053038-32098-6-git-send-email-zyw@rock-chips.com> (raw)
In-Reply-To: <1452053038-32098-1-git-send-email-zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
This tv080wum-nl0 panel is a mipi panel, it can use in MIPI_TX socket
of rk3288 evb board.
Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
Changes in v7:
- Move the lcd_en control to act8846 dts
Changes in v6: None
Changes in v5:
- add a blank line befor lcd_en
Changes in v4: None
Changes in v3: None
arch/arm/boot/dts/rk3288-evb-act8846.dts | 2 ++
arch/arm/boot/dts/rk3288-evb.dtsi | 12 +++++++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index e662147..7d5475b 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -50,6 +50,8 @@
gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
+ regulator-always-on;
+ regulator-boot-on;
regulator-name = "vcc_lcd";
vin-supply = <&vcc_io>;
};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 4faabdb..0c91858 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -47,7 +47,7 @@
reg = <0x0 0x80000000>;
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <
0 1 2 3 4 5 6 7
@@ -183,6 +183,16 @@
status = "okay";
};
+&mipi_dsi {
+ status = "okay";
+ panel {
+ compatible ="boe,tv080wum-nl0";
+ reg = <0>;
+ backlight = <&backlight>;
+ status = "okay";
+ };
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: zyw@rock-chips.com (Chris Zhong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 5/5] ARM: dts: rockchip: add support mipi panel tv080wum-nl0
Date: Wed, 6 Jan 2016 12:03:57 +0800 [thread overview]
Message-ID: <1452053038-32098-6-git-send-email-zyw@rock-chips.com> (raw)
In-Reply-To: <1452053038-32098-1-git-send-email-zyw@rock-chips.com>
This tv080wum-nl0 panel is a mipi panel, it can use in MIPI_TX socket
of rk3288 evb board.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v7:
- Move the lcd_en control to act8846 dts
Changes in v6: None
Changes in v5:
- add a blank line befor lcd_en
Changes in v4: None
Changes in v3: None
arch/arm/boot/dts/rk3288-evb-act8846.dts | 2 ++
arch/arm/boot/dts/rk3288-evb.dtsi | 12 +++++++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index e662147..7d5475b 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -50,6 +50,8 @@
gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
+ regulator-always-on;
+ regulator-boot-on;
regulator-name = "vcc_lcd";
vin-supply = <&vcc_io>;
};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 4faabdb..0c91858 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -47,7 +47,7 @@
reg = <0x0 0x80000000>;
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <
0 1 2 3 4 5 6 7
@@ -183,6 +183,16 @@
status = "okay";
};
+&mipi_dsi {
+ status = "okay";
+ panel {
+ compatible ="boe,tv080wum-nl0";
+ reg = <0>;
+ backlight = <&backlight>;
+ status = "okay";
+ };
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
--
2.6.3
next prev parent reply other threads:[~2016-01-06 4:04 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-06 4:03 [PATCH v7 0/5] Add mipi dsi support for rk3288 Chris Zhong
2016-01-06 4:03 ` Chris Zhong
2016-01-06 4:03 ` Chris Zhong
2016-01-06 4:03 ` [PATCH v7 1/5] drm/rockchip: return a true clock rate to adjusted_mode Chris Zhong
2016-01-06 4:03 ` Chris Zhong
2016-01-06 4:03 ` Chris Zhong
2016-01-06 4:03 ` [PATCH v7 2/5] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver Chris Zhong
2016-01-06 4:03 ` Chris Zhong
2016-01-06 4:03 ` [PATCH v7 3/5] drm: rockchip: Support Synopsys DW MIPI DSI Chris Zhong
2016-01-06 4:03 ` Chris Zhong
2016-01-06 4:03 ` Chris Zhong
2016-01-06 6:30 ` Mark yao
2016-01-06 6:30 ` Mark yao
2016-01-06 6:30 ` Mark yao
2016-01-06 7:12 ` [PATCH v7.1 " Chris Zhong
2016-01-06 7:12 ` Chris Zhong
2016-01-06 7:12 ` Chris Zhong
2016-01-06 8:12 ` [PATCH v7.2 " Chris Zhong
2016-01-06 8:12 ` Chris Zhong
2016-01-06 8:12 ` Chris Zhong
2016-01-06 4:03 ` [PATCH v7 4/5] ARM: dts: rockchip: add rk3288 mipi_dsi nodes Chris Zhong
2016-01-06 4:03 ` Chris Zhong
2016-01-19 15:29 ` Heiko Stuebner
2016-01-19 15:29 ` Heiko Stuebner
2016-01-19 15:29 ` Heiko Stuebner
2016-01-20 0:50 ` Chris Zhong
2016-01-20 0:50 ` Chris Zhong
2016-01-06 4:03 ` Chris Zhong [this message]
2016-01-06 4:03 ` [PATCH v7 5/5] ARM: dts: rockchip: add support mipi panel tv080wum-nl0 Chris Zhong
2016-01-06 4:03 ` Chris Zhong
2016-01-19 19:26 ` Heiko Stuebner
2016-01-19 19:26 ` Heiko Stuebner
2016-01-19 19:26 ` Heiko Stuebner
2016-01-20 1:09 ` Chris Zhong
2016-01-20 1:09 ` Chris Zhong
2016-01-20 1:09 ` Chris Zhong
2016-01-20 22:25 ` Heiko Stuebner
2016-01-20 22:25 ` Heiko Stuebner
2016-01-20 22:25 ` Heiko Stuebner
2016-01-06 8:39 ` [PATCH v7 0/5] Add mipi dsi support for rk3288 Mark yao
2016-01-06 8:39 ` Mark yao
2016-01-06 8:39 ` Mark yao
2016-02-08 10:12 ` Archit Taneja
2016-02-08 10:12 ` Archit Taneja
2016-02-08 10:12 ` Archit Taneja
2016-02-08 10:52 ` Heiko Stuebner
2016-02-08 10:52 ` Heiko Stuebner
2016-02-08 10:52 ` Heiko Stuebner
2016-02-08 12:26 ` Archit Taneja
2016-02-08 12:26 ` Archit Taneja
2016-02-08 12:26 ` Archit Taneja
2016-02-24 9:38 ` Xinliang Liu
2016-02-24 9:38 ` Xinliang Liu
2016-02-24 9:38 ` Xinliang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452053038-32098-6-git-send-email-zyw@rock-chips.com \
--to=zyw@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=heiko@sntech.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mark.yao@rock-chips.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.