From: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
To: <shawnguo@kernel.org>
Cc: <stefan@agner.ch>, <kernel@pengutronix.de>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Subject: [PATCH] ARM: dts: vf-colibri-eval-v3: Use enable-gpios for BL_ON
Date: Sat, 9 Jan 2016 12:29:53 +0530 [thread overview]
Message-ID: <1452322793-26020-1-git-send-email-bhuvanchandra.dv@toradex.com> (raw)
Use pwm-backlight driver 'enable-gpios' property for backlight on/off
control.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/boot/dts/vf-colibri.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index e5949b9..1c0da05 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -10,7 +10,10 @@
/ {
bl: backlight {
compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_bl_on>;
pwms = <&pwm0 0 5000000 0>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
};
@@ -169,6 +172,12 @@
>;
};
+ pinctrl_gpio_bl_on: gpio_bl_on {
+ fsl,pins = <
+ VF610_PAD_PTC0__GPIO_45 0x22ef
+ >;
+ };
+
pinctrl_i2c0: i2c0grp {
fsl,pins = <
VF610_PAD_PTB14__I2C0_SCL 0x37ff
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
To: shawnguo@kernel.org
Cc: devicetree@vger.kernel.org,
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>,
linux-kernel@vger.kernel.org, stefan@agner.ch,
kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: vf-colibri-eval-v3: Use enable-gpios for BL_ON
Date: Sat, 9 Jan 2016 12:29:53 +0530 [thread overview]
Message-ID: <1452322793-26020-1-git-send-email-bhuvanchandra.dv@toradex.com> (raw)
Use pwm-backlight driver 'enable-gpios' property for backlight on/off
control.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/boot/dts/vf-colibri.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index e5949b9..1c0da05 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -10,7 +10,10 @@
/ {
bl: backlight {
compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_bl_on>;
pwms = <&pwm0 0 5000000 0>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
};
@@ -169,6 +172,12 @@
>;
};
+ pinctrl_gpio_bl_on: gpio_bl_on {
+ fsl,pins = <
+ VF610_PAD_PTC0__GPIO_45 0x22ef
+ >;
+ };
+
pinctrl_i2c0: i2c0grp {
fsl,pins = <
VF610_PAD_PTB14__I2C0_SCL 0x37ff
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: bhuvanchandra.dv@toradex.com (Bhuvanchandra DV)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: vf-colibri-eval-v3: Use enable-gpios for BL_ON
Date: Sat, 9 Jan 2016 12:29:53 +0530 [thread overview]
Message-ID: <1452322793-26020-1-git-send-email-bhuvanchandra.dv@toradex.com> (raw)
Use pwm-backlight driver 'enable-gpios' property for backlight on/off
control.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/boot/dts/vf-colibri.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index e5949b9..1c0da05 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -10,7 +10,10 @@
/ {
bl: backlight {
compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_bl_on>;
pwms = <&pwm0 0 5000000 0>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
};
@@ -169,6 +172,12 @@
>;
};
+ pinctrl_gpio_bl_on: gpio_bl_on {
+ fsl,pins = <
+ VF610_PAD_PTC0__GPIO_45 0x22ef
+ >;
+ };
+
pinctrl_i2c0: i2c0grp {
fsl,pins = <
VF610_PAD_PTB14__I2C0_SCL 0x37ff
--
2.7.0
next reply other threads:[~2016-01-09 7:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-09 6:59 Bhuvanchandra DV [this message]
2016-01-09 6:59 ` [PATCH] ARM: dts: vf-colibri-eval-v3: Use enable-gpios for BL_ON Bhuvanchandra DV
2016-01-09 6:59 ` Bhuvanchandra DV
2016-01-27 18:23 ` Bhuvanchandra DV
2016-01-27 18:23 ` Bhuvanchandra DV
2016-01-27 18:23 ` Bhuvanchandra DV
2016-01-28 8:39 ` Shawn Guo
2016-01-28 8:39 ` Shawn Guo
2016-01-28 8:39 ` Shawn Guo
2016-01-28 22:28 ` Stefan Agner
2016-01-28 22:28 ` Stefan Agner
2016-01-28 22:28 ` Stefan Agner
2016-02-01 11:19 ` Shawn Guo
2016-02-01 11:19 ` Shawn Guo
2016-02-01 11:19 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452322793-26020-1-git-send-email-bhuvanchandra.dv@toradex.com \
--to=bhuvanchandra.dv@toradex.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.