All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andi Shyti <andi.shyti@samsung.com>
To: linux-samsung-soc@vger.kernel.org
Cc: Sangbeom Kim <sbkim73@samsung.com>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	Andi Shyti <andi.shyti@samsung.com>,
	Andi Shyti <andi@etezian.org>,
	Yadwinder Singh Brar <yadi.brar01@gmail.com>
Subject: [PATCH v2 1/3] clk: s2mps11: allocate only one structure for clock init
Date: Tue, 19 Jan 2016 17:52:30 +0900	[thread overview]
Message-ID: <1453193552-4761-2-git-send-email-andi.shyti@samsung.com> (raw)
In-Reply-To: <1453193552-4761-1-git-send-email-andi.shyti@samsung.com>

The driver allocates three structures for three different clock
types. They are quite similar and in the clock init data they
differ only by the name. Only one of these structures is used,
while the others lie unused in the memory.

The clock's name, though, is not such a meaningful information
and by assigning the same name to the initial data we can avoid
over allocation. The common name chosen will be s2mps11,
coherently with the device driver name, instead of the clock
device.

Therefore, remove the structures associated to s2mps13 and
s2mps14 and use only the one referred to s2mps11 for all kind of
clocks.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clk/clk-s2mps11.c | 56 ++++++-----------------------------------------
 1 file changed, 7 insertions(+), 49 deletions(-)

diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
index d266299..22d4df2 100644
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -99,6 +99,7 @@ static struct clk_ops s2mps11_clk_ops = {
 	.recalc_rate	= s2mps11_clk_recalc_rate,
 };
 
+/* This s2mps11_clks_init tructure is common to s2mps11, s2mps13 and s2mps14 */
 static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
 	[S2MPS11_CLK_AP] = {
 		.name = "s2mps11_ap",
@@ -117,43 +118,11 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
 	},
 };
 
-static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = {
-	[S2MPS11_CLK_AP] = {
-		.name = "s2mps13_ap",
-		.ops = &s2mps11_clk_ops,
-		.flags = CLK_IS_ROOT,
-	},
-	[S2MPS11_CLK_CP] = {
-		.name = "s2mps13_cp",
-		.ops = &s2mps11_clk_ops,
-		.flags = CLK_IS_ROOT,
-	},
-	[S2MPS11_CLK_BT] = {
-		.name = "s2mps13_bt",
-		.ops = &s2mps11_clk_ops,
-		.flags = CLK_IS_ROOT,
-	},
-};
-
-static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
-	[S2MPS11_CLK_AP] = {
-		.name = "s2mps14_ap",
-		.ops = &s2mps11_clk_ops,
-		.flags = CLK_IS_ROOT,
-	},
-	[S2MPS11_CLK_BT] = {
-		.name = "s2mps14_bt",
-		.ops = &s2mps11_clk_ops,
-		.flags = CLK_IS_ROOT,
-	},
-};
-
 static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev,
 		struct clk_init_data *clks_init)
 {
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct device_node *clk_np;
-	int i;
 
 	if (!iodev->dev->of_node)
 		return ERR_PTR(-EINVAL);
@@ -164,13 +133,6 @@ static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev,
 		return ERR_PTR(-EINVAL);
 	}
 
-	for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
-		if (!clks_init[i].name)
-			continue; /* Skip clocks not present in some devices */
-		of_property_read_string_index(clk_np, "clock-output-names", i,
-				&clks_init[i].name);
-	}
-
 	return clk_np;
 }
 
@@ -179,8 +141,8 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct s2mps11_clk *s2mps11_clks, *s2mps11_clk;
 	unsigned int s2mps11_reg;
-	struct clk_init_data *clks_init;
 	int i, ret = 0;
+	enum sec_device_type hwid = platform_get_device_id(pdev)->driver_data;
 
 	s2mps11_clks = devm_kcalloc(&pdev->dev, S2MPS11_CLKS_NUM,
 				sizeof(*s2mps11_clk), GFP_KERNEL);
@@ -194,22 +156,18 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 	if (!clk_table)
 		return -ENOMEM;
 
-	switch(platform_get_device_id(pdev)->driver_data) {
+	switch (hwid) {
 	case S2MPS11X:
 		s2mps11_reg = S2MPS11_REG_RTC_CTRL;
-		clks_init = s2mps11_clks_init;
 		break;
 	case S2MPS13X:
 		s2mps11_reg = S2MPS13_REG_RTCCTRL;
-		clks_init = s2mps13_clks_init;
 		break;
 	case S2MPS14X:
 		s2mps11_reg = S2MPS14_REG_RTCCTRL;
-		clks_init = s2mps14_clks_init;
 		break;
 	case S5M8767X:
 		s2mps11_reg = S5M8767_REG_CTRL1;
-		clks_init = s2mps11_clks_init;
 		break;
 	default:
 		dev_err(&pdev->dev, "Invalid device type\n");
@@ -217,15 +175,15 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 	}
 
 	/* Store clocks of_node in first element of s2mps11_clks array */
-	s2mps11_clks->clk_np = s2mps11_clk_parse_dt(pdev, clks_init);
+	s2mps11_clks->clk_np = s2mps11_clk_parse_dt(pdev, s2mps11_clks_init);
 	if (IS_ERR(s2mps11_clks->clk_np))
 		return PTR_ERR(s2mps11_clks->clk_np);
 
 	for (i = 0; i < S2MPS11_CLKS_NUM; i++, s2mps11_clk++) {
-		if (!clks_init[i].name)
+		if (i == S2MPS11_CLK_CP && hwid == S2MPS14X)
 			continue; /* Skip clocks not present in some devices */
 		s2mps11_clk->iodev = iodev;
-		s2mps11_clk->hw.init = &clks_init[i];
+		s2mps11_clk->hw.init = &s2mps11_clks_init[i];
 		s2mps11_clk->mask = 1 << i;
 		s2mps11_clk->reg = s2mps11_reg;
 
@@ -248,7 +206,7 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 
 	for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
 		/* Skip clocks not present on S2MPS14 */
-		if (!clks_init[i].name)
+		if (i == S2MPS11_CLK_CP && hwid == S2MPS14X)
 			continue;
 		clk_table[i] = s2mps11_clks[i].clk;
 	}
-- 
2.7.0.rc3

  reply	other threads:[~2016-01-19  8:52 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-19  8:52 [PATCH v2 0/3] refactoring on the s2mps11 device driver Andi Shyti
2016-01-19  8:52 ` Andi Shyti [this message]
2016-01-19 23:35   ` [PATCH v2 1/3] clk: s2mps11: allocate only one structure for clock init Krzysztof Kozlowski
2016-01-19  8:52 ` [PATCH v2 2/3] clk: s2mps11: merge two for loop in one Andi Shyti
2016-01-19 23:38   ` Krzysztof Kozlowski
2016-01-19  8:52 ` [PATCH v2 3/3] clk: s2mps11: remove redundant code Andi Shyti
2016-01-19 23:42   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1453193552-4761-2-git-send-email-andi.shyti@samsung.com \
    --to=andi.shyti@samsung.com \
    --cc=andi@etezian.org \
    --cc=k.kozlowski@samsung.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sbkim73@samsung.com \
    --cc=sboyd@codeaurora.org \
    --cc=yadi.brar01@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.