From: Douglas Anderson <dianders@chromium.org> To: John Youn <John.Youn@synopsys.com>, balbi@ti.com, kever.yang@rock-chips.com Cc: william.wu@rock-chips.com, huangtao@rock-chips.com, heiko@sntech.de, linux-rockchip@lists.infradead.org, Julius Werner <jwerner@chromium.org>, gregory.herrero@intel.com, yousaf.kaukab@intel.com, dinguyen@opensource.altera.com, stern@rowland.harvard.edu, ming.lei@canonical.com, Douglas Anderson <dianders@chromium.org>, johnyoun@synopsys.com, gregkh@linuxfoundation.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v5 15/21] usb: dwc2: host: Add scheduler logging for missed SOFs Date: Fri, 22 Jan 2016 10:18:50 -0800 [thread overview] Message-ID: <1453486736-15358-16-git-send-email-dianders@chromium.org> (raw) In-Reply-To: <1453486736-15358-1-git-send-email-dianders@chromium.org> We'll use the new "scheduler verbose debugging" macro to log missed SOFs. This is fast enough (assuming you configure it to use the ftrace buffer) that we can do it without worrying about the speed hit. The overhead hit if the scheduler tracing is set to "no_printk" should be near zero. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- Changes in v5: None Changes in v4: - Add scheduler logging for missed SOFs new for v4. Changes in v3: None Changes in v2: None drivers/usb/dwc2/core.h | 3 ++- drivers/usb/dwc2/hcd.c | 2 +- drivers/usb/dwc2/hcd_intr.c | 12 ++++++++---- 3 files changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 18f9e4045643..64d45a2053bb 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -809,9 +809,10 @@ struct dwc2_hsotg { bool bus_suspended; bool new_connection; + u16 last_frame_num; + #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS #define FRAME_NUM_ARRAY_SIZE 1000 - u16 last_frame_num; u16 *frame_num_array; u16 *last_frame_num_array; int frame_num_idx; diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 584c64114a82..03072d1fd44d 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -3082,8 +3082,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq) FRAME_NUM_ARRAY_SIZE, GFP_KERNEL); if (!hsotg->last_frame_num_array) goto error1; - hsotg->last_frame_num = HFNUM_MAX_FRNUM; #endif + hsotg->last_frame_num = HFNUM_MAX_FRNUM; /* Check if the bus driver or platform code has setup a dma_mask */ if (hsotg->core_params->dma_enable > 0 && diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index b54a0c41d34f..1875e4590a3c 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -55,12 +55,16 @@ /* This function is for debug only */ static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg) { -#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS u16 curr_frame_number = hsotg->frame_number; + u16 expected = dwc2_frame_num_inc(hsotg->last_frame_num, 1); + + if (expected != curr_frame_number) + dwc2_sch_vdbg(hsotg, "MISSED SOF %04x != %04x\n", + expected, curr_frame_number); +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS if (hsotg->frame_num_idx < FRAME_NUM_ARRAY_SIZE) { - if (((hsotg->last_frame_num + 1) & HFNUM_MAX_FRNUM) != - curr_frame_number) { + if (expected != curr_frame_number) { hsotg->frame_num_array[hsotg->frame_num_idx] = curr_frame_number; hsotg->last_frame_num_array[hsotg->frame_num_idx] = @@ -79,8 +83,8 @@ static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg) } hsotg->dumped_frame_num_array = 1; } - hsotg->last_frame_num = curr_frame_number; #endif + hsotg->last_frame_num = curr_frame_number; } static void dwc2_hc_handle_tt_clear(struct dwc2_hsotg *hsotg, -- 2.7.0.rc3.207.g0ac5344
WARNING: multiple messages have this Message-ID (diff)
From: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org> To: John Youn <John.Youn-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>, balbi-l0cyMroinI0@public.gmane.org, kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org Cc: huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org, gregory.herrero-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org, heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org, johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, ming.lei-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, yousaf.kaukab-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org, william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org, Julius Werner <jwerner-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>, dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org Subject: [PATCH v5 15/21] usb: dwc2: host: Add scheduler logging for missed SOFs Date: Fri, 22 Jan 2016 10:18:50 -0800 [thread overview] Message-ID: <1453486736-15358-16-git-send-email-dianders@chromium.org> (raw) In-Reply-To: <1453486736-15358-1-git-send-email-dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org> We'll use the new "scheduler verbose debugging" macro to log missed SOFs. This is fast enough (assuming you configure it to use the ftrace buffer) that we can do it without worrying about the speed hit. The overhead hit if the scheduler tracing is set to "no_printk" should be near zero. Signed-off-by: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org> --- Changes in v5: None Changes in v4: - Add scheduler logging for missed SOFs new for v4. Changes in v3: None Changes in v2: None drivers/usb/dwc2/core.h | 3 ++- drivers/usb/dwc2/hcd.c | 2 +- drivers/usb/dwc2/hcd_intr.c | 12 ++++++++---- 3 files changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 18f9e4045643..64d45a2053bb 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -809,9 +809,10 @@ struct dwc2_hsotg { bool bus_suspended; bool new_connection; + u16 last_frame_num; + #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS #define FRAME_NUM_ARRAY_SIZE 1000 - u16 last_frame_num; u16 *frame_num_array; u16 *last_frame_num_array; int frame_num_idx; diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 584c64114a82..03072d1fd44d 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -3082,8 +3082,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq) FRAME_NUM_ARRAY_SIZE, GFP_KERNEL); if (!hsotg->last_frame_num_array) goto error1; - hsotg->last_frame_num = HFNUM_MAX_FRNUM; #endif + hsotg->last_frame_num = HFNUM_MAX_FRNUM; /* Check if the bus driver or platform code has setup a dma_mask */ if (hsotg->core_params->dma_enable > 0 && diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index b54a0c41d34f..1875e4590a3c 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -55,12 +55,16 @@ /* This function is for debug only */ static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg) { -#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS u16 curr_frame_number = hsotg->frame_number; + u16 expected = dwc2_frame_num_inc(hsotg->last_frame_num, 1); + + if (expected != curr_frame_number) + dwc2_sch_vdbg(hsotg, "MISSED SOF %04x != %04x\n", + expected, curr_frame_number); +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS if (hsotg->frame_num_idx < FRAME_NUM_ARRAY_SIZE) { - if (((hsotg->last_frame_num + 1) & HFNUM_MAX_FRNUM) != - curr_frame_number) { + if (expected != curr_frame_number) { hsotg->frame_num_array[hsotg->frame_num_idx] = curr_frame_number; hsotg->last_frame_num_array[hsotg->frame_num_idx] = @@ -79,8 +83,8 @@ static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg) } hsotg->dumped_frame_num_array = 1; } - hsotg->last_frame_num = curr_frame_number; #endif + hsotg->last_frame_num = curr_frame_number; } static void dwc2_hc_handle_tt_clear(struct dwc2_hsotg *hsotg, -- 2.7.0.rc3.207.g0ac5344
next prev parent reply other threads:[~2016-01-22 18:21 UTC|newest] Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-01-22 18:18 [PATCH v5 0/21] usb: dwc2: host: Fix and speed up all the stuff, especially with splits Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-22 18:18 ` [PATCH v5 01/21] usb: dwc2: rockchip: Make the max_transfer_size automatic Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-22 18:18 ` [PATCH v5 02/21] usb: dwc2: host: Get aligned DMA in a more supported way Douglas Anderson 2016-01-22 18:18 ` [PATCH v5 03/21] usb: dwc2: host: Set host_rx_fifo_size to 528 for rk3066 Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-27 10:13 ` Kever Yang 2016-01-27 19:44 ` Doug Anderson 2016-01-27 19:44 ` Doug Anderson 2016-01-28 8:28 ` Kever Yang 2016-01-22 18:18 ` [PATCH v5 04/21] usb: dwc2: host: Set host_perio_tx_fifo_size to 304 " Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-28 3:10 ` Kever Yang 2016-01-28 3:10 ` Kever Yang 2016-01-28 3:28 ` Doug Anderson 2016-01-28 6:41 ` Kever Yang 2016-01-28 18:16 ` Doug Anderson 2016-01-28 18:16 ` Doug Anderson 2016-01-28 23:25 ` Doug Anderson 2016-01-22 18:18 ` [PATCH v5 05/21] usb: dwc2: host: Avoid use of chan->qh after qh freed Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-28 3:25 ` Kever Yang 2016-01-28 23:26 ` Doug Anderson 2016-01-28 23:26 ` Doug Anderson 2016-01-22 18:18 ` [PATCH v5 06/21] usb: dwc2: host: Always add to the tail of queues Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-27 10:23 ` Kever Yang 2016-01-27 10:23 ` Kever Yang 2016-01-22 18:18 ` [PATCH v5 07/21] usb: dwc2: hcd: fix split transfer schedule sequence Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-28 1:20 ` Kever Yang 2016-01-22 18:18 ` [PATCH v5 08/21] usb: dwc2: host: Add scheduler tracing Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-28 3:39 ` Kever Yang 2016-01-22 18:18 ` [PATCH v5 09/21] usb: dwc2: host: Add a delay before releasing periodic bandwidth Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-22 18:18 ` [PATCH v5 10/21] usb: dwc2: host: Giveback URB in tasklet context Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-22 18:18 ` [PATCH v5 11/21] usb: dwc2: host: Use periodic interrupt even with DMA Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-22 18:18 ` [PATCH v5 12/21] usb: dwc2: host: Rename some fields in struct dwc2_qh Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-22 18:18 ` [PATCH v5 13/21] usb: dwc2: host: Reorder things in hcd_queue.c Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-22 18:18 ` [PATCH v5 14/21] usb: dwc2: host: Split code out to make dwc2_do_reserve() Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson [this message] 2016-01-22 18:18 ` [PATCH v5 15/21] usb: dwc2: host: Add scheduler logging for missed SOFs Douglas Anderson 2016-01-22 18:18 ` [PATCH v5 16/21] usb: dwc2: host: Manage frame nums better in scheduler Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-27 20:49 ` Doug Anderson 2016-01-27 20:49 ` Doug Anderson 2016-01-22 18:18 ` [PATCH v5 17/21] usb: dwc2: host: Schedule periodic right away if it's time Douglas Anderson 2016-01-22 18:18 ` [PATCH v5 18/21] usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-22 18:18 ` [PATCH v5 19/21] usb: dwc2: host: Properly set even/odd frame Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-22 18:18 ` [PATCH v5 20/21] usb: dwc2: host: Totally redo the microframe scheduler Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-24 5:44 ` Doug Anderson 2016-01-24 5:44 ` Doug Anderson 2016-01-22 18:18 ` [PATCH v5 21/21] usb: dwc2: host: If using uframe scheduler, end splits better Douglas Anderson 2016-01-22 18:18 ` Douglas Anderson 2016-01-23 17:52 ` [PATCH v5 0/21] usb: dwc2: host: Fix and speed up all the stuff, especially with splits Heiko Stuebner 2016-01-23 17:52 ` Heiko Stuebner 2016-01-23 23:09 ` Doug Anderson 2016-01-23 23:09 ` Doug Anderson 2016-01-24 5:36 ` Doug Anderson 2016-01-24 5:36 ` Doug Anderson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1453486736-15358-16-git-send-email-dianders@chromium.org \ --to=dianders@chromium.org \ --cc=John.Youn@synopsys.com \ --cc=balbi@ti.com \ --cc=dinguyen@opensource.altera.com \ --cc=gregkh@linuxfoundation.org \ --cc=gregory.herrero@intel.com \ --cc=heiko@sntech.de \ --cc=huangtao@rock-chips.com \ --cc=johnyoun@synopsys.com \ --cc=jwerner@chromium.org \ --cc=kever.yang@rock-chips.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=linux-usb@vger.kernel.org \ --cc=ming.lei@canonical.com \ --cc=stern@rowland.harvard.edu \ --cc=william.wu@rock-chips.com \ --cc=yousaf.kaukab@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.