From: Wenyou Yang <wenyou.yang@atmel.com>
To: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
"Pawel Moll" <pawel.moll@arm.com>,
Mark Brown <broonie@kernel.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>
Cc: Javier Martinez Canillas <javier@dowhile0.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Peter Korsgaard <jacmet@gmail.com>,
Nicolas Ferre <nicolas.ferre@atmel.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Wenyou Yang <wenyou.yang@atmel.com>
Subject: [PATCH v9 2/2] mfd: add documentation for ACT8945A DT bindings
Date: Wed, 27 Jan 2016 17:38:50 +0800 [thread overview]
Message-ID: <1453887530-22490-3-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1453887530-22490-1-git-send-email-wenyou.yang@atmel.com>
The Active-semi ACT8945A PMIC is a Multi-Function Device, it has
two subdevices:
- Regulator
- Charger
This patch adds documentation for ACT8945A DT bindings.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
Changes in v9: None
Changes in v8: None
Changes in v7:
- collect Acked-by from Lee Jones
Changes in v6:
- change the regulator name.
Changes in v5: None
Changes in v4: None
Changes in v3:
- fix the tabbing errors in Example.
- use "pmic@5b" label, not "act8945a@5b" in Example.
- collect Acked-by from Rob.
Changes in v2:
- use more specific label in Example.
- add pmic and charger nodes in Example.
Documentation/devicetree/bindings/mfd/act8945a.txt | 82 ++++++++++++++++++++
1 file changed, 82 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/act8945a.txt
diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
new file mode 100644
index 0000000..f2a8387
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/act8945a.txt
@@ -0,0 +1,82 @@
+Device-Tree bindings for Active-semi ACT8945A MFD driver
+
+Required properties:
+ - compatible: "active-semi,act8945a".
+ - reg: the I2C slave address for the ACT8945A chip
+
+The chip exposes two subdevices:
+ - a regulators: see ../regulator/act8945a-regulator.txt
+ - a charger: see ../power/act8945a-charger.txt
+
+Example:
+ pmic@5b {
+ compatible = "active-semi,act8945a";
+ reg = <0x5b>;
+ status = "okay";
+
+ pmic {
+ compatible = "active-semi,act8945a-regulator";
+ active-semi,vsel-high;
+
+ regulators {
+ vdd_1v35_reg: REG_DCDC1 {
+ regulator-name = "VDD_1V35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ vdd_1v2_reg: REG_DCDC2 {
+ regulator-name = "VDD_1V2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: REG_DCDC3 {
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_fuse_reg: REG_LDO1 {
+ regulator-name = "VDD_FUSE";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_lp_reg: REG_LDO2 {
+ regulator-name = "VDD_3V3_LP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_led_reg: REG_LDO3 {
+ regulator-name = "VDD_LED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_sdhc_1v8_reg: REG_LDO4 {
+ regulator-name = "VDD_SDHC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ charger {
+ compatible = "active-semi,act8945a-charger";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_chglev>;
+ active-semi,chglev-gpio = <&pioA 12 GPIO_ACTIVE_HIGH>;
+ active-semi,input_voltage_threshold = <6600>;
+ active-semi,precondition_timeout = <40>;
+ active-semi,total_timeout = <3>;
+ };
+ };
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Wenyou Yang <wenyou.yang@atmel.com>
To: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Brown <broonie@kernel.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>
Cc: Javier Martinez Canillas <javier@dowhile0.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Peter Korsgaard <jacmet@gmail.com>,
Nicolas Ferre <nicolas.ferre@atmel.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Wenyou Yang <wenyou.yang@atmel.com>
Subject: [PATCH v9 2/2] mfd: add documentation for ACT8945A DT bindings
Date: Wed, 27 Jan 2016 17:38:50 +0800 [thread overview]
Message-ID: <1453887530-22490-3-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1453887530-22490-1-git-send-email-wenyou.yang@atmel.com>
The Active-semi ACT8945A PMIC is a Multi-Function Device, it has
two subdevices:
- Regulator
- Charger
This patch adds documentation for ACT8945A DT bindings.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
Changes in v9: None
Changes in v8: None
Changes in v7:
- collect Acked-by from Lee Jones
Changes in v6:
- change the regulator name.
Changes in v5: None
Changes in v4: None
Changes in v3:
- fix the tabbing errors in Example.
- use "pmic@5b" label, not "act8945a@5b" in Example.
- collect Acked-by from Rob.
Changes in v2:
- use more specific label in Example.
- add pmic and charger nodes in Example.
Documentation/devicetree/bindings/mfd/act8945a.txt | 82 ++++++++++++++++++++
1 file changed, 82 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/act8945a.txt
diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
new file mode 100644
index 0000000..f2a8387
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/act8945a.txt
@@ -0,0 +1,82 @@
+Device-Tree bindings for Active-semi ACT8945A MFD driver
+
+Required properties:
+ - compatible: "active-semi,act8945a".
+ - reg: the I2C slave address for the ACT8945A chip
+
+The chip exposes two subdevices:
+ - a regulators: see ../regulator/act8945a-regulator.txt
+ - a charger: see ../power/act8945a-charger.txt
+
+Example:
+ pmic@5b {
+ compatible = "active-semi,act8945a";
+ reg = <0x5b>;
+ status = "okay";
+
+ pmic {
+ compatible = "active-semi,act8945a-regulator";
+ active-semi,vsel-high;
+
+ regulators {
+ vdd_1v35_reg: REG_DCDC1 {
+ regulator-name = "VDD_1V35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ vdd_1v2_reg: REG_DCDC2 {
+ regulator-name = "VDD_1V2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: REG_DCDC3 {
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_fuse_reg: REG_LDO1 {
+ regulator-name = "VDD_FUSE";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_lp_reg: REG_LDO2 {
+ regulator-name = "VDD_3V3_LP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_led_reg: REG_LDO3 {
+ regulator-name = "VDD_LED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_sdhc_1v8_reg: REG_LDO4 {
+ regulator-name = "VDD_SDHC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ charger {
+ compatible = "active-semi,act8945a-charger";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_chglev>;
+ active-semi,chglev-gpio = <&pioA 12 GPIO_ACTIVE_HIGH>;
+ active-semi,input_voltage_threshold = <6600>;
+ active-semi,precondition_timeout = <40>;
+ active-semi,total_timeout = <3>;
+ };
+ };
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: wenyou.yang@atmel.com (Wenyou Yang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 2/2] mfd: add documentation for ACT8945A DT bindings
Date: Wed, 27 Jan 2016 17:38:50 +0800 [thread overview]
Message-ID: <1453887530-22490-3-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1453887530-22490-1-git-send-email-wenyou.yang@atmel.com>
The Active-semi ACT8945A PMIC is a Multi-Function Device, it has
two subdevices:
- Regulator
- Charger
This patch adds documentation for ACT8945A DT bindings.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
Changes in v9: None
Changes in v8: None
Changes in v7:
- collect Acked-by from Lee Jones
Changes in v6:
- change the regulator name.
Changes in v5: None
Changes in v4: None
Changes in v3:
- fix the tabbing errors in Example.
- use "pmic at 5b" label, not "act8945a at 5b" in Example.
- collect Acked-by from Rob.
Changes in v2:
- use more specific label in Example.
- add pmic and charger nodes in Example.
Documentation/devicetree/bindings/mfd/act8945a.txt | 82 ++++++++++++++++++++
1 file changed, 82 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/act8945a.txt
diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
new file mode 100644
index 0000000..f2a8387
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/act8945a.txt
@@ -0,0 +1,82 @@
+Device-Tree bindings for Active-semi ACT8945A MFD driver
+
+Required properties:
+ - compatible: "active-semi,act8945a".
+ - reg: the I2C slave address for the ACT8945A chip
+
+The chip exposes two subdevices:
+ - a regulators: see ../regulator/act8945a-regulator.txt
+ - a charger: see ../power/act8945a-charger.txt
+
+Example:
+ pmic at 5b {
+ compatible = "active-semi,act8945a";
+ reg = <0x5b>;
+ status = "okay";
+
+ pmic {
+ compatible = "active-semi,act8945a-regulator";
+ active-semi,vsel-high;
+
+ regulators {
+ vdd_1v35_reg: REG_DCDC1 {
+ regulator-name = "VDD_1V35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ vdd_1v2_reg: REG_DCDC2 {
+ regulator-name = "VDD_1V2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: REG_DCDC3 {
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_fuse_reg: REG_LDO1 {
+ regulator-name = "VDD_FUSE";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_lp_reg: REG_LDO2 {
+ regulator-name = "VDD_3V3_LP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_led_reg: REG_LDO3 {
+ regulator-name = "VDD_LED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_sdhc_1v8_reg: REG_LDO4 {
+ regulator-name = "VDD_SDHC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ charger {
+ compatible = "active-semi,act8945a-charger";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_chglev>;
+ active-semi,chglev-gpio = <&pioA 12 GPIO_ACTIVE_HIGH>;
+ active-semi,input_voltage_threshold = <6600>;
+ active-semi,precondition_timeout = <40>;
+ active-semi,total_timeout = <3>;
+ };
+ };
--
1.7.9.5
next prev parent reply other threads:[~2016-01-27 9:43 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-27 9:38 [PATCH v9 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver Wenyou Yang
2016-01-27 9:38 ` Wenyou Yang
2016-01-27 9:38 ` Wenyou Yang
2016-01-27 9:38 ` [PATCH v9 1/2] " Wenyou Yang
2016-01-27 9:38 ` Wenyou Yang
2016-01-27 9:38 ` Wenyou Yang
2016-02-10 16:12 ` Lee Jones
2016-02-10 16:12 ` Lee Jones
2016-01-27 9:38 ` Wenyou Yang [this message]
2016-01-27 9:38 ` [PATCH v9 2/2] mfd: add documentation for ACT8945A DT bindings Wenyou Yang
2016-01-27 9:38 ` Wenyou Yang
2016-02-10 16:12 ` Lee Jones
2016-02-10 16:12 ` Lee Jones
2016-02-10 16:12 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453887530-22490-3-git-send-email-wenyou.yang@atmel.com \
--to=wenyou.yang@atmel.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jacmet@gmail.com \
--cc=javier@dowhile0.org \
--cc=k.kozlowski@samsung.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.