From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Michael Turquette <mturquette@baylibre.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH v4 08/13] ARM: at91: pm: move idle functions to pm.c
Date: Wed, 27 Jan 2016 17:11:07 +0100 [thread overview]
Message-ID: <1453911072-23608-9-git-send-email-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <1453911072-23608-1-git-send-email-alexandre.belloni@free-electrons.com>
Avoid using code from clk/at91 for PM.
This also has the bonus effect of setting arm_pm_idle for sama5 platforms.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
arch/arm/mach-at91/at91rm9200.c | 2 --
arch/arm/mach-at91/at91sam9.c | 2 --
arch/arm/mach-at91/generic.h | 6 ++----
arch/arm/mach-at91/pm.c | 37 ++++++++++++++++++++++++++++++++-----
arch/arm/mach-at91/sama5.c | 2 +-
drivers/clk/at91/pmc.c | 15 ---------------
6 files changed, 35 insertions(+), 29 deletions(-)
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index c1a7c6cc00e1..63b4fa25b48a 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -12,7 +12,6 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
-#include <asm/system_misc.h>
#include "generic.h"
#include "soc.h"
@@ -33,7 +32,6 @@ static void __init at91rm9200_dt_device_init(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
- arm_pm_idle = at91rm9200_idle;
at91rm9200_pm_init();
}
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index 7eb64f763034..cada2a6412b3 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -62,8 +62,6 @@ static void __init at91sam9_common_init(void)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
-
- arm_pm_idle = at91sam9_idle;
}
static void __init at91sam9_dt_device_init(void)
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b0fa7dc7286d..d224e195706a 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -18,20 +18,18 @@
extern void __init at91_map_io(void);
extern void __init at91_alt_map_io(void);
-/* idle */
-extern void at91rm9200_idle(void);
-extern void at91sam9_idle(void);
-
#ifdef CONFIG_PM
extern void __init at91rm9200_pm_init(void);
extern void __init at91sam9260_pm_init(void);
extern void __init at91sam9g45_pm_init(void);
extern void __init at91sam9x5_pm_init(void);
+extern void __init sama5_pm_init(void);
#else
static inline void __init at91rm9200_pm_init(void) { }
static inline void __init at91sam9260_pm_init(void) { }
static inline void __init at91sam9g45_pm_init(void) { }
static inline void __init at91sam9x5_pm_init(void) { }
+static inline void __init sama5_pm_init(void) { }
#endif
#endif /* _AT91_GENERIC_H */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 0a87c98337a9..1c86cbcb57f6 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -31,6 +31,7 @@
#include <asm/mach/irq.h>
#include <asm/fncpy.h>
#include <asm/cacheflush.h>
+#include <asm/system_misc.h>
#include "generic.h"
#include "pm.h"
@@ -354,6 +355,21 @@ static __init void at91_dt_ramc(void)
at91_pm_set_standby(standby);
}
+void at91rm9200_idle(void)
+{
+ /*
+ * Disable the processor clock. The processor will be automatically
+ * re-enabled by an interrupt or by a reset.
+ */
+ writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+}
+
+void at91sam9_idle(void)
+{
+ writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+ cpu_do_idle();
+}
+
static void __init at91_pm_sram_init(void)
{
struct gen_pool *sram_pool;
@@ -411,7 +427,7 @@ static __initconst struct of_device_id atmel_pmc_ids[] = {
{ /* sentinel */ },
};
-static void __init at91_pm_init(void)
+static void __init at91_pm_init(void (*pm_idle)(void))
{
struct device_node *pmc_np;
@@ -425,6 +441,9 @@ static void __init at91_pm_init(void)
return;
}
+ if (pm_idle)
+ arm_pm_idle = pm_idle;
+
at91_pm_sram_init();
if (at91_suspend_sram_fn)
@@ -445,7 +464,7 @@ void __init at91rm9200_pm_init(void)
at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
at91_pm_data.memctrl = AT91_MEMCTRL_MC;
- at91_pm_init();
+ at91_pm_init(at91rm9200_idle);
}
void __init at91sam9260_pm_init(void)
@@ -453,7 +472,7 @@ void __init at91sam9260_pm_init(void)
at91_dt_ramc();
at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
- at91_pm_init();
+ at91_pm_init(at91sam9_idle);
}
void __init at91sam9g45_pm_init(void)
@@ -461,7 +480,7 @@ void __init at91sam9g45_pm_init(void)
at91_dt_ramc();
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
- at91_pm_init();
+ at91_pm_init(at91sam9_idle);
}
void __init at91sam9x5_pm_init(void)
@@ -469,5 +488,13 @@ void __init at91sam9x5_pm_init(void)
at91_dt_ramc();
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
- at91_pm_init();
+ at91_pm_init(at91sam9_idle);
+}
+
+void __init sama5_pm_init(void)
+{
+ at91_dt_ramc();
+ at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+ at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+ at91_pm_init(NULL);
}
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index d9cf6799aec0..df8fdf1cf66d 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -51,7 +51,7 @@ static void __init sama5_dt_device_init(void)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
- at91sam9x5_pm_init();
+ sama5_pm_init();
}
static const char *const sama5_dt_board_compat[] __initconst = {
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 0b255e7fc718..361ea0c1d3c9 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -32,21 +32,6 @@ struct at91_pmc {
void __iomem *at91_pmc_base;
EXPORT_SYMBOL_GPL(at91_pmc_base);
-void at91rm9200_idle(void)
-{
- /*
- * Disable the processor clock. The processor will be automatically
- * re-enabled by an interrupt or by a reset.
- */
- at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-}
-
-void at91sam9_idle(void)
-{
- at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
- cpu_do_idle();
-}
-
int of_at91_get_clk_range(struct device_node *np, const char *propname,
struct clk_range *range)
{
--
2.5.0
WARNING: multiple messages have this Message-ID (diff)
From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 08/13] ARM: at91: pm: move idle functions to pm.c
Date: Wed, 27 Jan 2016 17:11:07 +0100 [thread overview]
Message-ID: <1453911072-23608-9-git-send-email-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <1453911072-23608-1-git-send-email-alexandre.belloni@free-electrons.com>
Avoid using code from clk/at91 for PM.
This also has the bonus effect of setting arm_pm_idle for sama5 platforms.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
arch/arm/mach-at91/at91rm9200.c | 2 --
arch/arm/mach-at91/at91sam9.c | 2 --
arch/arm/mach-at91/generic.h | 6 ++----
arch/arm/mach-at91/pm.c | 37 ++++++++++++++++++++++++++++++++-----
arch/arm/mach-at91/sama5.c | 2 +-
drivers/clk/at91/pmc.c | 15 ---------------
6 files changed, 35 insertions(+), 29 deletions(-)
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index c1a7c6cc00e1..63b4fa25b48a 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -12,7 +12,6 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
-#include <asm/system_misc.h>
#include "generic.h"
#include "soc.h"
@@ -33,7 +32,6 @@ static void __init at91rm9200_dt_device_init(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
- arm_pm_idle = at91rm9200_idle;
at91rm9200_pm_init();
}
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index 7eb64f763034..cada2a6412b3 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -62,8 +62,6 @@ static void __init at91sam9_common_init(void)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
-
- arm_pm_idle = at91sam9_idle;
}
static void __init at91sam9_dt_device_init(void)
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b0fa7dc7286d..d224e195706a 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -18,20 +18,18 @@
extern void __init at91_map_io(void);
extern void __init at91_alt_map_io(void);
-/* idle */
-extern void at91rm9200_idle(void);
-extern void at91sam9_idle(void);
-
#ifdef CONFIG_PM
extern void __init at91rm9200_pm_init(void);
extern void __init at91sam9260_pm_init(void);
extern void __init at91sam9g45_pm_init(void);
extern void __init at91sam9x5_pm_init(void);
+extern void __init sama5_pm_init(void);
#else
static inline void __init at91rm9200_pm_init(void) { }
static inline void __init at91sam9260_pm_init(void) { }
static inline void __init at91sam9g45_pm_init(void) { }
static inline void __init at91sam9x5_pm_init(void) { }
+static inline void __init sama5_pm_init(void) { }
#endif
#endif /* _AT91_GENERIC_H */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 0a87c98337a9..1c86cbcb57f6 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -31,6 +31,7 @@
#include <asm/mach/irq.h>
#include <asm/fncpy.h>
#include <asm/cacheflush.h>
+#include <asm/system_misc.h>
#include "generic.h"
#include "pm.h"
@@ -354,6 +355,21 @@ static __init void at91_dt_ramc(void)
at91_pm_set_standby(standby);
}
+void at91rm9200_idle(void)
+{
+ /*
+ * Disable the processor clock. The processor will be automatically
+ * re-enabled by an interrupt or by a reset.
+ */
+ writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+}
+
+void at91sam9_idle(void)
+{
+ writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+ cpu_do_idle();
+}
+
static void __init at91_pm_sram_init(void)
{
struct gen_pool *sram_pool;
@@ -411,7 +427,7 @@ static __initconst struct of_device_id atmel_pmc_ids[] = {
{ /* sentinel */ },
};
-static void __init at91_pm_init(void)
+static void __init at91_pm_init(void (*pm_idle)(void))
{
struct device_node *pmc_np;
@@ -425,6 +441,9 @@ static void __init at91_pm_init(void)
return;
}
+ if (pm_idle)
+ arm_pm_idle = pm_idle;
+
at91_pm_sram_init();
if (at91_suspend_sram_fn)
@@ -445,7 +464,7 @@ void __init at91rm9200_pm_init(void)
at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
at91_pm_data.memctrl = AT91_MEMCTRL_MC;
- at91_pm_init();
+ at91_pm_init(at91rm9200_idle);
}
void __init at91sam9260_pm_init(void)
@@ -453,7 +472,7 @@ void __init at91sam9260_pm_init(void)
at91_dt_ramc();
at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
- at91_pm_init();
+ at91_pm_init(at91sam9_idle);
}
void __init at91sam9g45_pm_init(void)
@@ -461,7 +480,7 @@ void __init at91sam9g45_pm_init(void)
at91_dt_ramc();
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
- at91_pm_init();
+ at91_pm_init(at91sam9_idle);
}
void __init at91sam9x5_pm_init(void)
@@ -469,5 +488,13 @@ void __init at91sam9x5_pm_init(void)
at91_dt_ramc();
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
- at91_pm_init();
+ at91_pm_init(at91sam9_idle);
+}
+
+void __init sama5_pm_init(void)
+{
+ at91_dt_ramc();
+ at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+ at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+ at91_pm_init(NULL);
}
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index d9cf6799aec0..df8fdf1cf66d 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -51,7 +51,7 @@ static void __init sama5_dt_device_init(void)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
- at91sam9x5_pm_init();
+ sama5_pm_init();
}
static const char *const sama5_dt_board_compat[] __initconst = {
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 0b255e7fc718..361ea0c1d3c9 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -32,21 +32,6 @@ struct at91_pmc {
void __iomem *at91_pmc_base;
EXPORT_SYMBOL_GPL(at91_pmc_base);
-void at91rm9200_idle(void)
-{
- /*
- * Disable the processor clock. The processor will be automatically
- * re-enabled by an interrupt or by a reset.
- */
- at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-}
-
-void at91sam9_idle(void)
-{
- at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
- cpu_do_idle();
-}
-
int of_at91_get_clk_range(struct device_node *np, const char *propname,
struct clk_range *range)
{
--
2.5.0
next prev parent reply other threads:[~2016-01-27 16:14 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-27 16:10 [PATCH v4 00/13] ARM: at91: PMC driver rework Alexandre Belloni
2016-01-27 16:10 ` Alexandre Belloni
2016-01-27 16:11 ` [PATCH v4 01/13] clk: at91: make use of syscon to share PMC registers in several drivers Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni
2016-01-27 16:11 ` [PATCH v4 02/13] clk: at91: make use of syscon/regmap internally Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni
2016-01-28 8:31 ` Stephen Boyd
2016-01-28 8:31 ` Stephen Boyd
2016-01-27 16:11 ` [PATCH v4 03/13] clk: at91: remove IRQ handling and use polling Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni
2016-01-28 8:31 ` Stephen Boyd
2016-01-28 8:31 ` Stephen Boyd
2016-01-27 16:11 ` [PATCH v4 04/13] clk: at91: pmc: merge at91_pmc_init in atmel_pmc_probe Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni
2016-01-27 16:11 ` [PATCH v4 05/13] clk: at91: pmc: move pmc structures to C file Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni
2016-01-27 16:11 ` [PATCH v4 06/13] ARM: at91: pm: simply call at91_pm_init Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni
2016-01-27 16:11 ` [PATCH v4 07/13] ARM: at91: pm: find and remap the pmc Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni
2016-01-27 16:17 ` [PATCH v5 " Alexandre Belloni
2016-01-27 16:17 ` Alexandre Belloni
2016-01-27 17:55 ` [PATCH v4 " kbuild test robot
2016-01-27 17:55 ` kbuild test robot
2016-01-28 8:33 ` Stephen Boyd
2016-01-28 8:33 ` Stephen Boyd
2016-01-28 8:38 ` Alexandre Belloni
2016-01-28 8:38 ` Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni [this message]
2016-01-27 16:11 ` [PATCH v4 08/13] ARM: at91: pm: move idle functions to pm.c Alexandre Belloni
2016-01-27 16:11 ` [PATCH v4 09/13] ARM: at91: remove useless includes and function prototypes Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni
2016-01-27 16:11 ` [PATCH v4 10/13] usb: gadget: atmel: access the PMC using regmap Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni
2016-01-27 16:11 ` [PATCH v4 11/13] clk: at91: pmc: drop at91_pmc_base Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni
2016-01-27 16:11 ` [PATCH v4 12/13] clk: at91: pmc: remove useless capacities handling Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni
2016-01-28 8:30 ` Stephen Boyd
2016-01-28 8:30 ` Stephen Boyd
2016-01-27 16:11 ` [PATCH v4 13/13] clk: at91: remove useless includes Alexandre Belloni
2016-01-27 16:11 ` Alexandre Belloni
2016-01-28 8:30 ` Stephen Boyd
2016-01-28 8:30 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453911072-23608-9-git-send-email-alexandre.belloni@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=boris.brezillon@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.