From: Raja Mani <rmani@qti.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, Raja Mani <rmani@qti.qualcomm.com> Subject: [PATCH 2/2] ath10k: populate qca4019 fw specific wmi init params Date: Fri, 29 Jan 2016 16:35:12 +0530 [thread overview] Message-ID: <1454065512-8238-3-git-send-email-rmani@qti.qualcomm.com> (raw) In-Reply-To: <1454065512-8238-1-git-send-email-rmani@qti.qualcomm.com> Some of the parameter like tx/rx chain mask, number of htt tx desc, qcache active peer count, etc goes via wmi init cmd to qca4019 firmware are different. To make use of 10.4 gen_init function for qca4019, change wmi service ready handler and 10.4 wmi init functions to adapt qca4019 specific init values. Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/core.c | 14 ++++++++++++-- drivers/net/wireless/ath/ath10k/core.h | 6 ++++++ drivers/net/wireless/ath/ath10k/hw.h | 6 ------ drivers/net/wireless/ath/ath10k/wmi.c | 12 ++++++------ drivers/net/wireless/ath/ath10k/wmi.h | 1 - 5 files changed, 24 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index ac29813..565cbab 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -156,6 +156,11 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .channel_counters_freq_hz = 150000, .max_probe_resp_desc_thres = 24, .hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE, + .num_msdu_desc = 1424, + .qcache_active_peers = 50, + .tx_chain_mask = 0xf, + .rx_chain_mask = 0xf, + .max_spatial_stream = 4, .fw = { .dir = QCA99X0_HW_2_0_FW_DIR, .fw = QCA99X0_HW_2_0_FW_FILE, @@ -212,6 +217,11 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .channel_counters_freq_hz = 125000, .max_probe_resp_desc_thres = 24, .hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE, + .num_msdu_desc = 2500, + .qcache_active_peers = 35, + .tx_chain_mask = 0x3, + .rx_chain_mask = 0x3, + .max_spatial_stream = 2, .fw = { .dir = QCA4019_HW_1_0_FW_DIR, .fw = QCA4019_HW_1_0_FW_FILE, @@ -1522,9 +1532,9 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar) ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS; ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS; ar->num_tids = TARGET_10_4_TGT_NUM_TIDS; - ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC; + ar->htt.max_num_pending_tx = ar->hw_params.num_msdu_desc; ar->fw_stats_req_mask = WMI_STAT_PEER; - ar->max_spatial_stream = WMI_10_4_MAX_SPATIAL_STREAM; + ar->max_spatial_stream = ar->hw_params.max_spatial_stream; break; case ATH10K_FW_WMI_OP_VERSION_UNSET: case ATH10K_FW_WMI_OP_VERSION_MAX: diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 2e1a7da..dad608c 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -669,6 +669,12 @@ struct ath10k { /* The padding bytes's location is different on various chips */ enum ath10k_hw_4addr_pad hw_4addr_pad; + u32 num_msdu_desc; + u32 qcache_active_peers; + u32 tx_chain_mask; + u32 rx_chain_mask; + u32 max_spatial_stream; + struct ath10k_hw_params_fw { const char *dir; const char *fw; diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 291ca1f..2dece8d 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -426,16 +426,11 @@ enum ath10k_hw_4addr_pad { #define TARGET_10_4_ACTIVE_PEERS 0 #define TARGET_10_4_NUM_QCACHE_PEERS_MAX 512 -#define TARGET_10_4_QCACHE_ACTIVE_PEERS 50 #define TARGET_10_4_NUM_OFFLOAD_PEERS 0 #define TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS 0 #define TARGET_10_4_NUM_PEER_KEYS 2 #define TARGET_10_4_TGT_NUM_TIDS ((TARGET_10_4_NUM_PEERS) * 2) #define TARGET_10_4_AST_SKID_LIMIT 32 -#define TARGET_10_4_TX_CHAIN_MASK (BIT(0) | BIT(1) | \ - BIT(2) | BIT(3)) -#define TARGET_10_4_RX_CHAIN_MASK (BIT(0) | BIT(1) | \ - BIT(2) | BIT(3)) /* 100 ms for video, best-effort, and background */ #define TARGET_10_4_RX_TIMEOUT_LO_PRI 100 @@ -461,7 +456,6 @@ enum ath10k_hw_4addr_pad { #define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1 #define TARGET_10_4_VOW_CONFIG 0 #define TARGET_10_4_GTK_OFFLOAD_MAX_VDEV 3 -#define TARGET_10_4_NUM_MSDU_DESC (1024 + 400) #define TARGET_10_4_11AC_TX_MAX_FRAGS 2 #define TARGET_10_4_MAX_PEER_EXT_STATS 16 #define TARGET_10_4_SMART_ANT_CAP 0 diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index a7c3d29..fcf101d 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4562,9 +4562,9 @@ static void ath10k_wmi_event_service_ready_work(struct work_struct *work) if (test_bit(WMI_SERVICE_PEER_CACHING, ar->wmi.svc_map)) { ar->max_num_peers = TARGET_10_4_NUM_QCACHE_PEERS_MAX + - TARGET_10_4_NUM_VDEVS; - ar->num_active_peers = TARGET_10_4_QCACHE_ACTIVE_PEERS + - TARGET_10_4_NUM_VDEVS; + ar->max_num_vdevs; + ar->num_active_peers = ar->hw_params.qcache_active_peers + + ar->max_num_vdevs; ar->num_tids = ar->num_active_peers * 2; ar->max_num_stations = TARGET_10_4_NUM_QCACHE_PEERS_MAX; } @@ -5543,8 +5543,8 @@ static struct sk_buff *ath10k_wmi_10_4_op_gen_init(struct ath10k *ar) __cpu_to_le32(TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS); config.num_peer_keys = __cpu_to_le32(TARGET_10_4_NUM_PEER_KEYS); config.ast_skid_limit = __cpu_to_le32(TARGET_10_4_AST_SKID_LIMIT); - config.tx_chain_mask = __cpu_to_le32(TARGET_10_4_TX_CHAIN_MASK); - config.rx_chain_mask = __cpu_to_le32(TARGET_10_4_RX_CHAIN_MASK); + config.tx_chain_mask = __cpu_to_le32(ar->hw_params.tx_chain_mask); + config.rx_chain_mask = __cpu_to_le32(ar->hw_params.rx_chain_mask); config.rx_timeout_pri[0] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI); config.rx_timeout_pri[1] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI); @@ -5575,7 +5575,7 @@ static struct sk_buff *ath10k_wmi_10_4_op_gen_init(struct ath10k *ar) config.vow_config = __cpu_to_le32(TARGET_10_4_VOW_CONFIG); config.gtk_offload_max_vdev = __cpu_to_le32(TARGET_10_4_GTK_OFFLOAD_MAX_VDEV); - config.num_msdu_desc = __cpu_to_le32(TARGET_10_4_NUM_MSDU_DESC); + config.num_msdu_desc = __cpu_to_le32(ar->htt.max_num_pending_tx); config.max_frag_entries = __cpu_to_le32(TARGET_10_4_11AC_TX_MAX_FRAGS); config.max_peer_ext_stats = __cpu_to_le32(TARGET_10_4_MAX_PEER_EXT_STATS); diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index d85ad78..ddcd3a5 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -1800,7 +1800,6 @@ enum wmi_channel_change_cause { #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ -#define WMI_10_4_MAX_SPATIAL_STREAM 4 /* HT Capabilities*/ #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ -- 1.8.1.2
WARNING: multiple messages have this Message-ID (diff)
From: Raja Mani <rmani@qti.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Raja Mani <rmani@qti.qualcomm.com> Subject: [PATCH 2/2] ath10k: populate qca4019 fw specific wmi init params Date: Fri, 29 Jan 2016 16:35:12 +0530 [thread overview] Message-ID: <1454065512-8238-3-git-send-email-rmani@qti.qualcomm.com> (raw) In-Reply-To: <1454065512-8238-1-git-send-email-rmani@qti.qualcomm.com> Some of the parameter like tx/rx chain mask, number of htt tx desc, qcache active peer count, etc goes via wmi init cmd to qca4019 firmware are different. To make use of 10.4 gen_init function for qca4019, change wmi service ready handler and 10.4 wmi init functions to adapt qca4019 specific init values. Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/core.c | 14 ++++++++++++-- drivers/net/wireless/ath/ath10k/core.h | 6 ++++++ drivers/net/wireless/ath/ath10k/hw.h | 6 ------ drivers/net/wireless/ath/ath10k/wmi.c | 12 ++++++------ drivers/net/wireless/ath/ath10k/wmi.h | 1 - 5 files changed, 24 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index ac29813..565cbab 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -156,6 +156,11 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .channel_counters_freq_hz = 150000, .max_probe_resp_desc_thres = 24, .hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE, + .num_msdu_desc = 1424, + .qcache_active_peers = 50, + .tx_chain_mask = 0xf, + .rx_chain_mask = 0xf, + .max_spatial_stream = 4, .fw = { .dir = QCA99X0_HW_2_0_FW_DIR, .fw = QCA99X0_HW_2_0_FW_FILE, @@ -212,6 +217,11 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .channel_counters_freq_hz = 125000, .max_probe_resp_desc_thres = 24, .hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE, + .num_msdu_desc = 2500, + .qcache_active_peers = 35, + .tx_chain_mask = 0x3, + .rx_chain_mask = 0x3, + .max_spatial_stream = 2, .fw = { .dir = QCA4019_HW_1_0_FW_DIR, .fw = QCA4019_HW_1_0_FW_FILE, @@ -1522,9 +1532,9 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar) ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS; ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS; ar->num_tids = TARGET_10_4_TGT_NUM_TIDS; - ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC; + ar->htt.max_num_pending_tx = ar->hw_params.num_msdu_desc; ar->fw_stats_req_mask = WMI_STAT_PEER; - ar->max_spatial_stream = WMI_10_4_MAX_SPATIAL_STREAM; + ar->max_spatial_stream = ar->hw_params.max_spatial_stream; break; case ATH10K_FW_WMI_OP_VERSION_UNSET: case ATH10K_FW_WMI_OP_VERSION_MAX: diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 2e1a7da..dad608c 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -669,6 +669,12 @@ struct ath10k { /* The padding bytes's location is different on various chips */ enum ath10k_hw_4addr_pad hw_4addr_pad; + u32 num_msdu_desc; + u32 qcache_active_peers; + u32 tx_chain_mask; + u32 rx_chain_mask; + u32 max_spatial_stream; + struct ath10k_hw_params_fw { const char *dir; const char *fw; diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 291ca1f..2dece8d 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -426,16 +426,11 @@ enum ath10k_hw_4addr_pad { #define TARGET_10_4_ACTIVE_PEERS 0 #define TARGET_10_4_NUM_QCACHE_PEERS_MAX 512 -#define TARGET_10_4_QCACHE_ACTIVE_PEERS 50 #define TARGET_10_4_NUM_OFFLOAD_PEERS 0 #define TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS 0 #define TARGET_10_4_NUM_PEER_KEYS 2 #define TARGET_10_4_TGT_NUM_TIDS ((TARGET_10_4_NUM_PEERS) * 2) #define TARGET_10_4_AST_SKID_LIMIT 32 -#define TARGET_10_4_TX_CHAIN_MASK (BIT(0) | BIT(1) | \ - BIT(2) | BIT(3)) -#define TARGET_10_4_RX_CHAIN_MASK (BIT(0) | BIT(1) | \ - BIT(2) | BIT(3)) /* 100 ms for video, best-effort, and background */ #define TARGET_10_4_RX_TIMEOUT_LO_PRI 100 @@ -461,7 +456,6 @@ enum ath10k_hw_4addr_pad { #define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1 #define TARGET_10_4_VOW_CONFIG 0 #define TARGET_10_4_GTK_OFFLOAD_MAX_VDEV 3 -#define TARGET_10_4_NUM_MSDU_DESC (1024 + 400) #define TARGET_10_4_11AC_TX_MAX_FRAGS 2 #define TARGET_10_4_MAX_PEER_EXT_STATS 16 #define TARGET_10_4_SMART_ANT_CAP 0 diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index a7c3d29..fcf101d 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4562,9 +4562,9 @@ static void ath10k_wmi_event_service_ready_work(struct work_struct *work) if (test_bit(WMI_SERVICE_PEER_CACHING, ar->wmi.svc_map)) { ar->max_num_peers = TARGET_10_4_NUM_QCACHE_PEERS_MAX + - TARGET_10_4_NUM_VDEVS; - ar->num_active_peers = TARGET_10_4_QCACHE_ACTIVE_PEERS + - TARGET_10_4_NUM_VDEVS; + ar->max_num_vdevs; + ar->num_active_peers = ar->hw_params.qcache_active_peers + + ar->max_num_vdevs; ar->num_tids = ar->num_active_peers * 2; ar->max_num_stations = TARGET_10_4_NUM_QCACHE_PEERS_MAX; } @@ -5543,8 +5543,8 @@ static struct sk_buff *ath10k_wmi_10_4_op_gen_init(struct ath10k *ar) __cpu_to_le32(TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS); config.num_peer_keys = __cpu_to_le32(TARGET_10_4_NUM_PEER_KEYS); config.ast_skid_limit = __cpu_to_le32(TARGET_10_4_AST_SKID_LIMIT); - config.tx_chain_mask = __cpu_to_le32(TARGET_10_4_TX_CHAIN_MASK); - config.rx_chain_mask = __cpu_to_le32(TARGET_10_4_RX_CHAIN_MASK); + config.tx_chain_mask = __cpu_to_le32(ar->hw_params.tx_chain_mask); + config.rx_chain_mask = __cpu_to_le32(ar->hw_params.rx_chain_mask); config.rx_timeout_pri[0] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI); config.rx_timeout_pri[1] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI); @@ -5575,7 +5575,7 @@ static struct sk_buff *ath10k_wmi_10_4_op_gen_init(struct ath10k *ar) config.vow_config = __cpu_to_le32(TARGET_10_4_VOW_CONFIG); config.gtk_offload_max_vdev = __cpu_to_le32(TARGET_10_4_GTK_OFFLOAD_MAX_VDEV); - config.num_msdu_desc = __cpu_to_le32(TARGET_10_4_NUM_MSDU_DESC); + config.num_msdu_desc = __cpu_to_le32(ar->htt.max_num_pending_tx); config.max_frag_entries = __cpu_to_le32(TARGET_10_4_11AC_TX_MAX_FRAGS); config.max_peer_ext_stats = __cpu_to_le32(TARGET_10_4_MAX_PEER_EXT_STATS); diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index d85ad78..ddcd3a5 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -1800,7 +1800,6 @@ enum wmi_channel_change_cause { #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ -#define WMI_10_4_MAX_SPATIAL_STREAM 4 /* HT Capabilities*/ #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ -- 1.8.1.2 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2016-01-29 11:05 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-01-29 11:05 [PATCH 0/2] add hw param and wmi changes for qca4019 Raja Mani 2016-01-29 11:05 ` Raja Mani 2016-01-29 11:05 ` [PATCH 1/2] ath10k: add qca4019 hw params Raja Mani 2016-01-29 11:05 ` Raja Mani 2016-01-29 11:05 ` Raja Mani [this message] 2016-01-29 11:05 ` [PATCH 2/2] ath10k: populate qca4019 fw specific wmi init params Raja Mani 2016-02-24 13:51 ` [PATCH 0/2] add hw param and wmi changes for qca4019 Valo, Kalle 2016-02-24 13:51 ` Valo, Kalle
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1454065512-8238-3-git-send-email-rmani@qti.qualcomm.com \ --to=rmani@qti.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.