All of lore.kernel.org
 help / color / mirror / Atom feed
From: tim.gore@intel.com
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v3] drm/i915: add WaIncreaseDefaultTLBEntries
Date: Mon,  1 Feb 2016 13:33:55 +0000	[thread overview]
Message-ID: <1454333635-8426-1-git-send-email-tim.gore@intel.com> (raw)

From: Tim Gore <tim.gore@intel.com>

WaIncreaseDefaultTLBEntries increases the number of TLB
entries available for GPGPU workloads and gives significant
( > 10% ) performance gain for some OCL benchmarks.
Put this in a new function that can be a place for
workarounds that are GT related but not required per ring.
This function is called on driver load and also after a
reset and on resume, so it is safe for workarounds that get
clobbered in these situations. This function currently has
just this one workaround.

v2: This was originally split into 3 patches but following
  review feedback was squashed into 1.
  I have not incorporated some style comments from Chris
  Wilson as I felt that after defining and intialising a
  temporary variable and then adding an additional if block
  to only write the register if the temporary variable had
  been set, this didn't really give a net gain.

v3: Resending in the hope that BAT will run

Signed-off-by: Tim Gore <tim.gore@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
---
 drivers/gpu/drm/i915/i915_gem_gtt.c | 21 +++++++++++++++++++++
 drivers/gpu/drm/i915/i915_reg.h     |  7 +++++++
 2 files changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 7377b67..5cd5f8b 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -2132,6 +2132,25 @@ static void i915_address_space_init(struct i915_address_space *vm,
 	list_add_tail(&vm->global_link, &dev_priv->vm_list);
 }
 
+static void gtt_write_workarounds(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* This function is for gtt related workarounds. This function is
+	 * called on driver load and after a GPU reset, so you can place
+	 * workarounds here even if they get overwritten by GPU reset.
+	 */
+	/* WaIncreaseDefaultTLBEntries:chv,bdw,skl,bxt */
+	if (IS_BROADWELL(dev))
+		I915_WRITE(GEN8_L3_LRA_1_GPGPU, GEN8_L3_LRA_1_GPGPU_DEFAULT_VALUE_BDW);
+	else if (IS_CHERRYVIEW(dev))
+		I915_WRITE(GEN8_L3_LRA_1_GPGPU, GEN8_L3_LRA_1_GPGPU_DEFAULT_VALUE_CHV);
+	else if (IS_SKYLAKE(dev))
+		I915_WRITE(GEN8_L3_LRA_1_GPGPU, GEN9_L3_LRA_1_GPGPU_DEFAULT_VALUE_SKL);
+	else if (IS_BROXTON(dev))
+		I915_WRITE(GEN8_L3_LRA_1_GPGPU, GEN9_L3_LRA_1_GPGPU_DEFAULT_VALUE_BXT);
+}
+
 int i915_ppgtt_init(struct drm_device *dev, struct i915_hw_ppgtt *ppgtt)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -2148,6 +2167,8 @@ int i915_ppgtt_init(struct drm_device *dev, struct i915_hw_ppgtt *ppgtt)
 
 int i915_ppgtt_init_hw(struct drm_device *dev)
 {
+	gtt_write_workarounds(dev);
+
 	/* In the case of execlists, PPGTT is enabled by the context descriptor
 	 * and the PDPs are contained within the context itself.  We don't
 	 * need to do anything here. */
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 65e32a3..0ab6312 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -8170,4 +8170,11 @@ enum skl_disp_power_wells {
 #define GEN9_VEBOX_MOCS(i)	_MMIO(0xcb00 + (i) * 4)	/* Video MOCS registers */
 #define GEN9_BLT_MOCS(i)	_MMIO(0xcc00 + (i) * 4)	/* Blitter MOCS registers */
 
+/* gamt regs */
+#define GEN8_L3_LRA_1_GPGPU _MMIO(0x4dd4)
+#define   GEN8_L3_LRA_1_GPGPU_DEFAULT_VALUE_BDW  0x67F1427F /* max/min for LRA1/2 */
+#define   GEN8_L3_LRA_1_GPGPU_DEFAULT_VALUE_CHV  0x5FF101FF /* max/min for LRA1/2 */
+#define   GEN9_L3_LRA_1_GPGPU_DEFAULT_VALUE_SKL  0x67F1427F /*    "        " */
+#define   GEN9_L3_LRA_1_GPGPU_DEFAULT_VALUE_BXT  0x5FF101FF /*    "        " */
+
 #endif /* _I915_REG_H_ */
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

                 reply	other threads:[~2016-02-01 13:34 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454333635-8426-1-git-send-email-tim.gore@intel.com \
    --to=tim.gore@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.