From: Arnd Bergmann <arnd@arndb.de> To: "David S. Miller" <davem@davemloft.net>, Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org, Arnd Bergmann <arnd@arndb.de>, netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] net: am79c961a: avoid %? in inline assembly Date: Mon, 8 Feb 2016 15:33:42 +0100 [thread overview] Message-ID: <1454942025-2779812-1-git-send-email-arnd@arndb.de> (raw) The am79c961a.c driver fails to build with clang because of an unusual inline assembly construct: drivers/net/ethernet/amd/am79c961a.c:53:7: error: invalid % escape in inline assembly string "str%?h %1, [%2] @ NET_RAP\n\t" The same change has been done a decade ago in arch/arm as of 6a39dd6222dd ("[ARM] 3759/2: Remove uses of %?"), but apparently some drivers were missed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- drivers/net/ethernet/amd/am79c961a.c | 64 ++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c index 87e727b921dc..fcdf5dda448f 100644 --- a/drivers/net/ethernet/amd/am79c961a.c +++ b/drivers/net/ethernet/amd/am79c961a.c @@ -50,8 +50,8 @@ static const char version[] = static void write_rreg(u_long base, u_int reg, u_int val) { asm volatile( - "str%?h %1, [%2] @ NET_RAP\n\t" - "str%?h %0, [%2, #-4] @ NET_RDP" + "strh %1, [%2] @ NET_RAP\n\t" + "strh %0, [%2, #-4] @ NET_RDP" : : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464)); } @@ -60,8 +60,8 @@ static inline unsigned short read_rreg(u_long base_addr, u_int reg) { unsigned short v; asm volatile( - "str%?h %1, [%2] @ NET_RAP\n\t" - "ldr%?h %0, [%2, #-4] @ NET_RDP" + "strh %1, [%2] @ NET_RAP\n\t" + "ldrh %0, [%2, #-4] @ NET_RDP" : "=r" (v) : "r" (reg), "r" (ISAIO_BASE + 0x0464)); return v; @@ -70,8 +70,8 @@ static inline unsigned short read_rreg(u_long base_addr, u_int reg) static inline void write_ireg(u_long base, u_int reg, u_int val) { asm volatile( - "str%?h %1, [%2] @ NET_RAP\n\t" - "str%?h %0, [%2, #8] @ NET_IDP" + "strh %1, [%2] @ NET_RAP\n\t" + "strh %0, [%2, #8] @ NET_IDP" : : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464)); } @@ -80,8 +80,8 @@ static inline unsigned short read_ireg(u_long base_addr, u_int reg) { u_short v; asm volatile( - "str%?h %1, [%2] @ NAT_RAP\n\t" - "ldr%?h %0, [%2, #8] @ NET_IDP\n\t" + "strh %1, [%2] @ NAT_RAP\n\t" + "ldrh %0, [%2, #8] @ NET_IDP\n\t" : "=r" (v) : "r" (reg), "r" (ISAIO_BASE + 0x0464)); return v; @@ -96,7 +96,7 @@ am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigne offset = ISAMEM_BASE + (offset << 1); length = (length + 1) & ~1; if ((int)buf & 2) { - asm volatile("str%?h %2, [%0], #4" + asm volatile("strh %2, [%0], #4" : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8))); buf += 2; length -= 2; @@ -104,20 +104,20 @@ am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigne while (length > 8) { register unsigned int tmp asm("r2"), tmp2 asm("r3"); asm volatile( - "ldm%?ia %0!, {%1, %2}" + "ldmia %0!, {%1, %2}" : "+r" (buf), "=&r" (tmp), "=&r" (tmp2)); length -= 8; asm volatile( - "str%?h %1, [%0], #4\n\t" - "mov%? %1, %1, lsr #16\n\t" - "str%?h %1, [%0], #4\n\t" - "str%?h %2, [%0], #4\n\t" - "mov%? %2, %2, lsr #16\n\t" - "str%?h %2, [%0], #4" + "strh %1, [%0], #4\n\t" + "mov %1, %1, lsr #16\n\t" + "strh %1, [%0], #4\n\t" + "strh %2, [%0], #4\n\t" + "mov %2, %2, lsr #16\n\t" + "strh %2, [%0], #4" : "+r" (offset), "=&r" (tmp), "=&r" (tmp2)); } while (length > 0) { - asm volatile("str%?h %2, [%0], #4" + asm volatile("strh %2, [%0], #4" : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8))); buf += 2; length -= 2; @@ -132,23 +132,23 @@ am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned if ((int)buf & 2) { unsigned int tmp; asm volatile( - "ldr%?h %2, [%0], #4\n\t" - "str%?b %2, [%1], #1\n\t" - "mov%? %2, %2, lsr #8\n\t" - "str%?b %2, [%1], #1" + "ldrh %2, [%0], #4\n\t" + "strb %2, [%1], #1\n\t" + "mov %2, %2, lsr #8\n\t" + "strb %2, [%1], #1" : "=&r" (offset), "=&r" (buf), "=r" (tmp): "0" (offset), "1" (buf)); length -= 2; } while (length > 8) { register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3; asm volatile( - "ldr%?h %2, [%0], #4\n\t" - "ldr%?h %4, [%0], #4\n\t" - "ldr%?h %3, [%0], #4\n\t" - "orr%? %2, %2, %4, lsl #16\n\t" - "ldr%?h %4, [%0], #4\n\t" - "orr%? %3, %3, %4, lsl #16\n\t" - "stm%?ia %1!, {%2, %3}" + "ldrh %2, [%0], #4\n\t" + "ldrh %4, [%0], #4\n\t" + "ldrh %3, [%0], #4\n\t" + "orr %2, %2, %4, lsl #16\n\t" + "ldrh %4, [%0], #4\n\t" + "orr %3, %3, %4, lsl #16\n\t" + "stmia %1!, {%2, %3}" : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2), "=r" (tmp3) : "0" (offset), "1" (buf)); length -= 8; @@ -156,10 +156,10 @@ am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned while (length > 0) { unsigned int tmp; asm volatile( - "ldr%?h %2, [%0], #4\n\t" - "str%?b %2, [%1], #1\n\t" - "mov%? %2, %2, lsr #8\n\t" - "str%?b %2, [%1], #1" + "ldrh %2, [%0], #4\n\t" + "strb %2, [%1], #1\n\t" + "mov %2, %2, lsr #8\n\t" + "strb %2, [%1], #1" : "=&r" (offset), "=&r" (buf), "=r" (tmp) : "0" (offset), "1" (buf)); length -= 2; } -- 2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: arnd@arndb.de (Arnd Bergmann) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] net: am79c961a: avoid %? in inline assembly Date: Mon, 8 Feb 2016 15:33:42 +0100 [thread overview] Message-ID: <1454942025-2779812-1-git-send-email-arnd@arndb.de> (raw) The am79c961a.c driver fails to build with clang because of an unusual inline assembly construct: drivers/net/ethernet/amd/am79c961a.c:53:7: error: invalid % escape in inline assembly string "str%?h %1, [%2] @ NET_RAP\n\t" The same change has been done a decade ago in arch/arm as of 6a39dd6222dd ("[ARM] 3759/2: Remove uses of %?"), but apparently some drivers were missed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- drivers/net/ethernet/amd/am79c961a.c | 64 ++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c index 87e727b921dc..fcdf5dda448f 100644 --- a/drivers/net/ethernet/amd/am79c961a.c +++ b/drivers/net/ethernet/amd/am79c961a.c @@ -50,8 +50,8 @@ static const char version[] = static void write_rreg(u_long base, u_int reg, u_int val) { asm volatile( - "str%?h %1, [%2] @ NET_RAP\n\t" - "str%?h %0, [%2, #-4] @ NET_RDP" + "strh %1, [%2] @ NET_RAP\n\t" + "strh %0, [%2, #-4] @ NET_RDP" : : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464)); } @@ -60,8 +60,8 @@ static inline unsigned short read_rreg(u_long base_addr, u_int reg) { unsigned short v; asm volatile( - "str%?h %1, [%2] @ NET_RAP\n\t" - "ldr%?h %0, [%2, #-4] @ NET_RDP" + "strh %1, [%2] @ NET_RAP\n\t" + "ldrh %0, [%2, #-4] @ NET_RDP" : "=r" (v) : "r" (reg), "r" (ISAIO_BASE + 0x0464)); return v; @@ -70,8 +70,8 @@ static inline unsigned short read_rreg(u_long base_addr, u_int reg) static inline void write_ireg(u_long base, u_int reg, u_int val) { asm volatile( - "str%?h %1, [%2] @ NET_RAP\n\t" - "str%?h %0, [%2, #8] @ NET_IDP" + "strh %1, [%2] @ NET_RAP\n\t" + "strh %0, [%2, #8] @ NET_IDP" : : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464)); } @@ -80,8 +80,8 @@ static inline unsigned short read_ireg(u_long base_addr, u_int reg) { u_short v; asm volatile( - "str%?h %1, [%2] @ NAT_RAP\n\t" - "ldr%?h %0, [%2, #8] @ NET_IDP\n\t" + "strh %1, [%2] @ NAT_RAP\n\t" + "ldrh %0, [%2, #8] @ NET_IDP\n\t" : "=r" (v) : "r" (reg), "r" (ISAIO_BASE + 0x0464)); return v; @@ -96,7 +96,7 @@ am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigne offset = ISAMEM_BASE + (offset << 1); length = (length + 1) & ~1; if ((int)buf & 2) { - asm volatile("str%?h %2, [%0], #4" + asm volatile("strh %2, [%0], #4" : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8))); buf += 2; length -= 2; @@ -104,20 +104,20 @@ am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigne while (length > 8) { register unsigned int tmp asm("r2"), tmp2 asm("r3"); asm volatile( - "ldm%?ia %0!, {%1, %2}" + "ldmia %0!, {%1, %2}" : "+r" (buf), "=&r" (tmp), "=&r" (tmp2)); length -= 8; asm volatile( - "str%?h %1, [%0], #4\n\t" - "mov%? %1, %1, lsr #16\n\t" - "str%?h %1, [%0], #4\n\t" - "str%?h %2, [%0], #4\n\t" - "mov%? %2, %2, lsr #16\n\t" - "str%?h %2, [%0], #4" + "strh %1, [%0], #4\n\t" + "mov %1, %1, lsr #16\n\t" + "strh %1, [%0], #4\n\t" + "strh %2, [%0], #4\n\t" + "mov %2, %2, lsr #16\n\t" + "strh %2, [%0], #4" : "+r" (offset), "=&r" (tmp), "=&r" (tmp2)); } while (length > 0) { - asm volatile("str%?h %2, [%0], #4" + asm volatile("strh %2, [%0], #4" : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8))); buf += 2; length -= 2; @@ -132,23 +132,23 @@ am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned if ((int)buf & 2) { unsigned int tmp; asm volatile( - "ldr%?h %2, [%0], #4\n\t" - "str%?b %2, [%1], #1\n\t" - "mov%? %2, %2, lsr #8\n\t" - "str%?b %2, [%1], #1" + "ldrh %2, [%0], #4\n\t" + "strb %2, [%1], #1\n\t" + "mov %2, %2, lsr #8\n\t" + "strb %2, [%1], #1" : "=&r" (offset), "=&r" (buf), "=r" (tmp): "0" (offset), "1" (buf)); length -= 2; } while (length > 8) { register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3; asm volatile( - "ldr%?h %2, [%0], #4\n\t" - "ldr%?h %4, [%0], #4\n\t" - "ldr%?h %3, [%0], #4\n\t" - "orr%? %2, %2, %4, lsl #16\n\t" - "ldr%?h %4, [%0], #4\n\t" - "orr%? %3, %3, %4, lsl #16\n\t" - "stm%?ia %1!, {%2, %3}" + "ldrh %2, [%0], #4\n\t" + "ldrh %4, [%0], #4\n\t" + "ldrh %3, [%0], #4\n\t" + "orr %2, %2, %4, lsl #16\n\t" + "ldrh %4, [%0], #4\n\t" + "orr %3, %3, %4, lsl #16\n\t" + "stmia %1!, {%2, %3}" : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2), "=r" (tmp3) : "0" (offset), "1" (buf)); length -= 8; @@ -156,10 +156,10 @@ am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned while (length > 0) { unsigned int tmp; asm volatile( - "ldr%?h %2, [%0], #4\n\t" - "str%?b %2, [%1], #1\n\t" - "mov%? %2, %2, lsr #8\n\t" - "str%?b %2, [%1], #1" + "ldrh %2, [%0], #4\n\t" + "strb %2, [%1], #1\n\t" + "mov %2, %2, lsr #8\n\t" + "strb %2, [%1], #1" : "=&r" (offset), "=&r" (buf), "=r" (tmp) : "0" (offset), "1" (buf)); length -= 2; } -- 2.7.0
next reply other threads:[~2016-02-08 14:34 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-02-08 14:33 Arnd Bergmann [this message] 2016-02-08 14:33 ` [PATCH] net: am79c961a: avoid %? in inline assembly Arnd Bergmann 2016-02-08 15:45 ` Russell King - ARM Linux 2016-02-08 15:45 ` Russell King - ARM Linux 2016-02-16 20:10 ` David Miller 2016-02-16 20:10 ` David Miller
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1454942025-2779812-1-git-send-email-arnd@arndb.de \ --to=arnd@arndb.de \ --cc=davem@davemloft.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=netdev@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.