From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Subject: [PATCH] ARM: dts: sun7i: Enable USB DRC on Olimex A20 EVB Date: Mon, 8 Feb 2016 16:29:47 +0100 [thread overview] Message-ID: <1454945387-29424-1-git-send-email-codekipper@gmail.com> (raw) From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Enable the otg/drc usb controller on the Olimex A20 EVB. Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index c3c626b..93bbf26 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -198,6 +198,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { allwinner,pins = "PC3"; @@ -219,6 +223,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; ®_ahci_5v { @@ -254,6 +265,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -268,7 +283,16 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- 2.7.1
WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com (codekipper at gmail.com) To: linux-arm-kernel@lists.infradead.org Subject: [linux-sunxi][PATCH] ARM: dts: sun7i: Enable USB DRC on Olimex A20 EVB Date: Mon, 8 Feb 2016 16:29:47 +0100 [thread overview] Message-ID: <1454945387-29424-1-git-send-email-codekipper@gmail.com> (raw) From: Marcus Cooper <codekipper@gmail.com> Enable the otg/drc usb controller on the Olimex A20 EVB. Signed-off-by: Marcus Cooper <codekipper@gmail.com> --- arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index c3c626b..93bbf26 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -198,6 +198,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin at 1 { allwinner,pins = "PC3"; @@ -219,6 +223,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + usb0_id_detect_pin: usb0_id_detect_pin at 0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; ®_ahci_5v { @@ -254,6 +265,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -268,7 +283,16 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- 2.7.1
next reply other threads:[~2016-02-08 15:29 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-02-08 15:29 codekipper-Re5JQEeQqe8AvxtiuMwx3w [this message] 2016-02-08 15:29 ` [linux-sunxi][PATCH] ARM: dts: sun7i: Enable USB DRC on Olimex A20 EVB codekipper at gmail.com [not found] ` <1454945387-29424-1-git-send-email-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2016-02-08 15:43 ` [PATCH] " Hans de Goede 2016-02-08 15:43 ` [linux-sunxi][PATCH] " Hans de Goede [not found] ` <56B8B7A1.5020800-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-02-08 16:10 ` Code Kipper 2016-02-08 16:10 ` Code Kipper
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1454945387-29424-1-git-send-email-codekipper@gmail.com \ --to=codekipper-re5jqeeqqe8avxtiumwx3w@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \ --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.