From: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org> To: Viresh Kumar <vireshk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: spear-devel-nkJGhpqTU55BDgjK7y7TUQ@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org> Subject: [PATCH] ARM: dts: spear: replace gpio-key,wakeup with wakeup-source property Date: Mon, 8 Feb 2016 21:55:35 +0000 [thread overview] Message-ID: <1454968535-11994-1-git-send-email-sudeep.holla@arm.com> (raw) Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source. Few dts files assign value "1" to gpio-key,wakeup which is incorrect. Since the presence of the boolean property indicates it is enabled, value of "0" or "1" have no significance. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property which inturn fixes the above mentioned issue. Reviewed-by: Viresh Kumar <viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Signed-off-by: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org> --- arch/arm/boot/dts/spear1310-evb.dts | 2 +- arch/arm/boot/dts/spear1340-evb.dts | 2 +- arch/arm/boot/dts/spear320-hmi.dts | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) Hi ARM-SoC guys, This is the only platform which doesn't have regular pull request, Viresh has acked it already. Can you pick this up directly for v4.6 ? Regards, Sudeep diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index e48857249ce7..84101e4eebbf 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -161,7 +161,7 @@ linux,code = <0x100>; gpios = <&gpio0 7 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index c611f5606dfe..6565f3cb866f 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -223,7 +223,7 @@ linux,code = <0x100>; gpios = <&gpio1 1 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 0aa6fef5ce22..0d0da1f65f0e 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -141,7 +141,7 @@ linux,code = <0x100>; gpios = <&stmpegpio 3 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; button@2 { @@ -149,7 +149,7 @@ linux,code = <0x200>; gpios = <&stmpegpio 2 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: sudeep.holla@arm.com (Sudeep Holla) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM: dts: spear: replace gpio-key, wakeup with wakeup-source property Date: Mon, 8 Feb 2016 21:55:35 +0000 [thread overview] Message-ID: <1454968535-11994-1-git-send-email-sudeep.holla@arm.com> (raw) Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source. Few dts files assign value "1" to gpio-key,wakeup which is incorrect. Since the presence of the boolean property indicates it is enabled, value of "0" or "1" have no significance. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property which inturn fixes the above mentioned issue. Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> --- arch/arm/boot/dts/spear1310-evb.dts | 2 +- arch/arm/boot/dts/spear1340-evb.dts | 2 +- arch/arm/boot/dts/spear320-hmi.dts | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) Hi ARM-SoC guys, This is the only platform which doesn't have regular pull request, Viresh has acked it already. Can you pick this up directly for v4.6 ? Regards, Sudeep diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index e48857249ce7..84101e4eebbf 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -161,7 +161,7 @@ linux,code = <0x100>; gpios = <&gpio0 7 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index c611f5606dfe..6565f3cb866f 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -223,7 +223,7 @@ linux,code = <0x100>; gpios = <&gpio1 1 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 0aa6fef5ce22..0d0da1f65f0e 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -141,7 +141,7 @@ linux,code = <0x100>; gpios = <&stmpegpio 3 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; button at 2 { @@ -149,7 +149,7 @@ linux,code = <0x200>; gpios = <&stmpegpio 2 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; -- 1.9.1
next reply other threads:[~2016-02-08 21:55 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-02-08 21:55 Sudeep Holla [this message] 2016-02-08 21:55 ` [PATCH] ARM: dts: spear: replace gpio-key, wakeup with wakeup-source property Sudeep Holla [not found] ` <1454968535-11994-1-git-send-email-sudeep.holla-5wv7dgnIgG8@public.gmane.org> 2016-02-09 15:44 ` [PATCH] ARM: dts: spear: replace gpio-key,wakeup " Sudeep Holla 2016-02-09 15:44 ` [PATCH] ARM: dts: spear: replace gpio-key, wakeup " Sudeep Holla [not found] ` <1455032699-3086-1-git-send-email-sudeep.holla-5wv7dgnIgG8@public.gmane.org> 2016-02-24 20:20 ` [PATCH] ARM: dts: spear: replace gpio-key,wakeup " Olof Johansson 2016-02-24 20:20 ` Olof Johansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1454968535-11994-1-git-send-email-sudeep.holla@arm.com \ --to=sudeep.holla-5wv7dgnigg8@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=spear-devel-nkJGhpqTU55BDgjK7y7TUQ@public.gmane.org \ --cc=vireshk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.