All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Subhransu S. Prusty" <subhransu.s.prusty@intel.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, lgirdwood@gmail.com, patches.audio@intel.com,
	broonie@kernel.org, Vinod Koul <vinod.koul@intel.com>,
	"Subhransu S. Prusty" <subhransu.s.prusty@intel.com>
Subject: [PATCH v6 01/15] ASoC: hdac_hdmi: Add hotplug notification and read ELD
Date: Fri, 12 Feb 2016 07:46:01 +0530	[thread overview]
Message-ID: <1455243375-16067-2-git-send-email-subhransu.s.prusty@intel.com> (raw)
In-Reply-To: <1455243375-16067-1-git-send-email-subhransu.s.prusty@intel.com>

This patch uses i915 component framework to register for hotplug
notification.

In the hotplug notification, driver reads pin sense and ELD by
sending PIN_SENSE and ELD verbs over HDA bus. Once it identifies
valid pin sense and valid ELD, store the ELD into the
corresponding pin map buffer.

Also read the monitor present sense during resume and ignore the
ELD notify from graphics during PM as is done in legacy hda,
commit 8ae743e82f0b ("ALSA: hda - Skip ELD notification during
system suspend")

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 sound/soc/codecs/hdac_hdmi.c | 217 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 211 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index 5a1ec0f..fff225d 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -34,6 +34,9 @@
 
 #define HDA_MAX_CONNECTIONS     32
 
+#define ELD_MAX_SIZE    256
+#define ELD_FIXED_BYTES	20
+
 struct hdac_hdmi_cvt_params {
 	unsigned int channels_min;
 	unsigned int channels_max;
@@ -48,11 +51,22 @@ struct hdac_hdmi_cvt {
 	struct hdac_hdmi_cvt_params params;
 };
 
+struct hdac_hdmi_eld {
+	bool	monitor_present;
+	bool	eld_valid;
+	int	eld_size;
+	char    eld_buffer[ELD_MAX_SIZE];
+};
+
 struct hdac_hdmi_pin {
 	struct list_head head;
 	hda_nid_t nid;
 	int num_mux_nids;
 	hda_nid_t mux_nids[HDA_MAX_CONNECTIONS];
+	struct hdac_hdmi_eld eld;
+	struct hdac_ext_device *edev;
+	int repoll_count;
+	struct delayed_work work;
 };
 
 struct hdac_hdmi_dai_pin_map {
@@ -76,6 +90,80 @@ static inline struct hdac_ext_device *to_hda_ext_device(struct device *dev)
 	return to_ehdac_device(hdac);
 }
 
+ /* HDMI ELD routines */
+static unsigned int hdac_hdmi_get_eld_data(struct hdac_device *codec,
+				hda_nid_t nid, int byte_index)
+{
+	unsigned int val;
+
+	val = snd_hdac_codec_read(codec, nid, 0, AC_VERB_GET_HDMI_ELDD,
+							byte_index);
+
+	dev_dbg(&codec->dev, "HDMI: ELD data byte %d: 0x%x\n",
+					byte_index, val);
+
+	return val;
+}
+
+static int hdac_hdmi_get_eld_size(struct hdac_device *codec, hda_nid_t nid)
+{
+	return snd_hdac_codec_read(codec, nid, 0, AC_VERB_GET_HDMI_DIP_SIZE,
+						 AC_DIPSIZE_ELD_BUF);
+}
+
+/*
+ * This function queries the ELD size and ELD data and fills in the buffer
+ * passed by user
+ */
+static int hdac_hdmi_get_eld(struct hdac_device *codec, hda_nid_t nid,
+			     unsigned char *buf, int *eld_size)
+{
+	int i, size, ret = 0;
+
+	/*
+	 * ELD size is initialized to zero in caller function. If no errors and
+	 * ELD is valid, actual eld_size is assigned.
+	 */
+
+	size = hdac_hdmi_get_eld_size(codec, nid);
+	if (size < ELD_FIXED_BYTES || size > ELD_MAX_SIZE) {
+		dev_err(&codec->dev, "HDMI: invalid ELD buf size %d\n", size);
+		return -ERANGE;
+	}
+
+	/* set ELD buffer */
+	for (i = 0; i < size; i++) {
+		unsigned int val = hdac_hdmi_get_eld_data(codec, nid, i);
+		/*
+		 * Graphics driver might be writing to ELD buffer right now.
+		 * Just abort. The caller will repoll after a while.
+		 */
+		if (!(val & AC_ELDD_ELD_VALID)) {
+			dev_err(&codec->dev,
+				"HDMI: invalid ELD data byte %d\n", i);
+			ret = -EINVAL;
+			goto error;
+		}
+		val &= AC_ELDD_ELD_DATA;
+		/*
+		 * The first byte cannot be zero. This can happen on some DVI
+		 * connections. Some Intel chips may also need some 250ms delay
+		 * to return non-zero ELD data, even when the graphics driver
+		 * correctly writes ELD content before setting ELD_valid bit.
+		 */
+		if (!val && !i) {
+			dev_err(&codec->dev, "HDMI: 0 ELD data\n");
+			ret = -EINVAL;
+			goto error;
+		}
+		buf[i] = val;
+	}
+
+	*eld_size = size;
+error:
+	return ret;
+}
+
 static int hdac_hdmi_setup_stream(struct hdac_ext_device *hdac,
 				hda_nid_t cvt_nid, hda_nid_t pin_nid,
 				u32 stream_tag, int format)
@@ -246,7 +334,6 @@ static int hdac_hdmi_pcm_open(struct snd_pcm_substream *substream,
 	struct hdac_ext_device *hdac = snd_soc_dai_get_drvdata(dai);
 	struct hdac_hdmi_priv *hdmi = hdac->private_data;
 	struct hdac_hdmi_dai_pin_map *dai_map;
-	int val;
 
 	if (dai->id > 0) {
 		dev_err(&hdac->hdac.dev, "Only one dai supported as of now\n");
@@ -255,12 +342,14 @@ static int hdac_hdmi_pcm_open(struct snd_pcm_substream *substream,
 
 	dai_map = &hdmi->dai_map[dai->id];
 
-	val = snd_hdac_codec_read(&hdac->hdac, dai_map->pin->nid, 0,
-					AC_VERB_GET_PIN_SENSE, 0);
-	dev_info(&hdac->hdac.dev, "Val for AC_VERB_GET_PIN_SENSE: %x\n", val);
+	if ((!dai_map->pin->eld.monitor_present) ||
+			(!dai_map->pin->eld.eld_valid)) {
+
+		dev_err(&hdac->hdac.dev,
+				"Failed: montior present? %d ELD valid?: %d\n",
+				dai_map->pin->eld.monitor_present,
+				dai_map->pin->eld.eld_valid);
 
-	if ((!(val & AC_PINSENSE_PRESENCE)) || (!(val & AC_PINSENSE_ELDV))) {
-		dev_err(&hdac->hdac.dev, "Monitor presence invalid with val: %x\n", val);
 		return -ENODEV;
 	}
 
@@ -410,6 +499,71 @@ static int hdac_hdmi_add_cvt(struct hdac_ext_device *edev, hda_nid_t nid)
 	return hdac_hdmi_query_cvt_params(&edev->hdac, cvt);
 }
 
+static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin, int repoll)
+{
+	struct hdac_ext_device *edev = pin->edev;
+	int val;
+
+	if (!edev)
+		return;
+
+	pin->repoll_count = repoll;
+
+	pm_runtime_get_sync(&edev->hdac.dev);
+	val = snd_hdac_codec_read(&edev->hdac, pin->nid, 0,
+					AC_VERB_GET_PIN_SENSE, 0);
+
+	dev_dbg(&edev->hdac.dev, "Pin sense val %x for pin: %d\n",
+						val, pin->nid);
+
+	pin->eld.monitor_present = !!(val & AC_PINSENSE_PRESENCE);
+	pin->eld.eld_valid = !!(val & AC_PINSENSE_ELDV);
+
+	if (!pin->eld.monitor_present || !pin->eld.eld_valid) {
+
+		dev_dbg(&edev->hdac.dev, "%s: disconnect for pin %d\n",
+						__func__, pin->nid);
+		goto put_hdac_device;
+	}
+
+	if (pin->eld.monitor_present && pin->eld.eld_valid) {
+		/* TODO: use i915 component for reading ELD later */
+		if (hdac_hdmi_get_eld(&edev->hdac, pin->nid,
+				pin->eld.eld_buffer,
+				&pin->eld.eld_size) == 0) {
+
+			print_hex_dump_bytes("ELD: ", DUMP_PREFIX_OFFSET,
+					pin->eld.eld_buffer, pin->eld.eld_size);
+		} else {
+			pin->eld.monitor_present = false;
+			pin->eld.eld_valid = false;
+		}
+	}
+
+	/*
+	 * Sometimes the pin_sense may present invalid monitor
+	 * present and eld_valid. If ELD data is not valid, loop few
+	 * more times to get correct pin sense and valid ELD.
+	 */
+	if ((!pin->eld.monitor_present || !pin->eld.eld_valid) && repoll)
+		schedule_delayed_work(&pin->work, msecs_to_jiffies(300));
+
+put_hdac_device:
+	pm_runtime_put_sync(&edev->hdac.dev);
+}
+
+static void hdac_hdmi_repoll_eld(struct work_struct *work)
+{
+	struct hdac_hdmi_pin *pin =
+		container_of(to_delayed_work(work), struct hdac_hdmi_pin, work);
+
+	/* picked from legacy HDA driver */
+	if (pin->repoll_count++ > 6)
+		pin->repoll_count = 0;
+
+	hdac_hdmi_present_sense(pin, pin->repoll_count);
+}
+
 static int hdac_hdmi_add_pin(struct hdac_ext_device *edev, hda_nid_t nid)
 {
 	struct hdac_hdmi_priv *hdmi = edev->private_data;
@@ -424,6 +578,9 @@ static int hdac_hdmi_add_pin(struct hdac_ext_device *edev, hda_nid_t nid)
 	list_add_tail(&pin->head, &hdmi->pin_list);
 	hdmi->num_pin++;
 
+	pin->edev = edev;
+	INIT_DELAYED_WORK(&pin->work, hdac_hdmi_repoll_eld);
+
 	return 0;
 }
 
@@ -482,17 +639,65 @@ static int hdac_hdmi_parse_and_map_nid(struct hdac_ext_device *edev)
 	return hdac_hdmi_init_dai_map(edev);
 }
 
+static void hdac_hdmi_eld_notify_cb(void *aptr, int port)
+{
+	struct hdac_ext_device *edev = aptr;
+	struct hdac_hdmi_priv *hdmi = edev->private_data;
+	struct hdac_hdmi_pin *pin;
+	struct snd_soc_codec *codec = edev->scodec;
+
+	/* Don't know how this mapping is derived */
+	hda_nid_t pin_nid = port + 0x04;
+
+	dev_dbg(&edev->hdac.dev, "%s: for pin: %d\n", __func__, pin_nid);
+
+	/*
+	 * skip notification during system suspend (but not in runtime PM);
+	 * the state will be updated at resume. Also since the ELD and
+	 * connection states are updated in anyway at the end of the resume,
+	 * we can skip it when received during PM process.
+	 */
+	if (snd_power_get_state(codec->component.card->snd_card) !=
+			SNDRV_CTL_POWER_D0)
+		return;
+
+	if (atomic_read(&edev->hdac.in_pm))
+		return;
+
+	list_for_each_entry(pin, &hdmi->pin_list, head) {
+		if (pin->nid == pin_nid)
+			hdac_hdmi_present_sense(pin, 1);
+	}
+}
+
+static struct i915_audio_component_audio_ops aops = {
+	.pin_eld_notify	= hdac_hdmi_eld_notify_cb,
+};
+
 static int hdmi_codec_probe(struct snd_soc_codec *codec)
 {
 	struct hdac_ext_device *edev = snd_soc_codec_get_drvdata(codec);
 	struct hdac_hdmi_priv *hdmi = edev->private_data;
 	struct snd_soc_dapm_context *dapm =
 		snd_soc_component_get_dapm(&codec->component);
+	struct hdac_hdmi_pin *pin;
+	int ret;
 
 	edev->scodec = codec;
 
 	create_fill_widget_route_map(dapm, &hdmi->dai_map[0]);
 
+	aops.audio_ptr = edev;
+	ret = snd_hdac_i915_register_notifier(&aops);
+	if (ret < 0) {
+		dev_err(&edev->hdac.dev, "notifier register failed: err: %d\n",
+				ret);
+		return ret;
+	}
+
+	list_for_each_entry(pin, &hdmi->pin_list, head)
+		hdac_hdmi_present_sense(pin, 1);
+
 	/* Imp: Store the card pointer in hda_codec */
 	edev->card = dapm->card->snd_card;
 
-- 
1.9.1

  reply	other threads:[~2016-02-12  2:15 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-12  2:16 [PATCH v6 00/15] ASoC: hdac_hdmi: Add DP & notification support Subhransu S. Prusty
2016-02-12  2:16 ` Subhransu S. Prusty [this message]
2016-02-15 20:58   ` Applied "ASoC: hdac_hdmi: Add hotplug notification and read ELD" to the asoc tree Mark Brown
2016-02-12  2:16 ` [PATCH v6 02/15] ASoC: hdac_hdmi: Apply constraints based on ELD Subhransu S. Prusty
2016-02-15 20:58   ` Applied "ASoC: hdac_hdmi: Apply constraints based on ELD" to the asoc tree Mark Brown
2016-02-12  2:16 ` [PATCH v6 03/15] ASoC: hdac_hdmi: Enable DP1.2 and all converters/pins Subhransu S. Prusty
2016-02-15 20:10   ` Mark Brown
2016-02-15 22:31     ` Takashi Iwai
2016-02-16  2:00       ` Mark Brown
2016-02-16  8:16         ` Takashi Iwai
2016-02-12  2:16 ` [PATCH v6 04/15] ASoC: hdac_hdmi: create dais based on number of cvts Subhransu S. Prusty
2016-02-12  2:16 ` [PATCH v6 05/15] ASoC: hdac_hdmi: Create widget/route based on nodes enumerated Subhransu S. Prusty
2016-02-12  2:16 ` [PATCH v6 06/15] ASoC: hdac_hdmi: Add jack reporting Subhransu S. Prusty
2016-02-15 20:58   ` Applied "ASoC: hdac_hdmi: Add jack reporting" to the asoc tree Mark Brown
2016-02-12  2:16 ` [PATCH v6 07/15] ASoC: hdac_hdmi: Enable playback on all enumerated ports Subhransu S. Prusty
2016-02-15 20:58   ` Applied "ASoC: hdac_hdmi: Enable playback on all enumerated ports" to the asoc tree Mark Brown
2016-02-12  2:16 ` [PATCH v6 08/15] drm/edid: Add API to help find connection type Subhransu S. Prusty
2016-02-15 20:25   ` Applied "drm/edid: Add API to help find connection type" to the asoc tree Mark Brown
2016-02-12  2:16 ` [PATCH v6 09/15] ASoC: hdac_hdmi: Add infoframe support for dp audio Subhransu S. Prusty
2016-02-12  2:16 ` [PATCH v6 10/15] ASoC: hdac_hdmi: Fix possible memory leak in hw_params Subhransu S. Prusty
2016-02-15 20:57   ` Mark Brown
2016-02-16  2:58     ` Vinod Koul
2016-02-12  2:16 ` [PATCH v6 11/15] ASoC: hdac_hdmi: Don't fail in dai startup to make userland happy Subhransu S. Prusty
2016-02-15 20:55   ` Mark Brown
2016-02-16  3:36     ` Vinod Koul
2016-02-12  2:16 ` [PATCH v6 12/15] ASoC: hdac_hdmi: Add PM support Subhransu S. Prusty
2016-02-12  2:16 ` [PATCH v6 13/15] ASoC: hdac_hdmi: Fix to keep codec power active during enumeration Subhransu S. Prusty
2016-02-12  2:16 ` [PATCH v6 14/15] ASoC: hdac_hdmi: Fix to reconfigure registers in runtime resume Subhransu S. Prusty
2016-02-12  2:16 ` [PATCH v6 15/15] ASoC: hdac_hdmi: Fix to wait for D3 before powering off codec Subhransu S. Prusty

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455243375-16067-2-git-send-email-subhransu.s.prusty@intel.com \
    --to=subhransu.s.prusty@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=patches.audio@intel.com \
    --cc=tiwai@suse.de \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.