All of lore.kernel.org
 help / color / mirror / Atom feed
From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
To: Jiri Kosina <jikos@kernel.org>, linux-input@vger.kernel.org
Cc: Ping Cheng <pinglinux@gmail.com>,
	Jason Gerecke <killertofu@gmail.com>,
	Aaron Skomra <skomra@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 3/6] HID: wacom: move down wireless_work()
Date: Fri, 12 Feb 2016 17:27:42 +0100	[thread overview]
Message-ID: <1455294465-13694-4-git-send-email-benjamin.tissoires@redhat.com> (raw)
In-Reply-To: <1455294465-13694-1-git-send-email-benjamin.tissoires@redhat.com>

If wireless_work() wants to reuse parse_and_register(), we need to have
it declared after this function.

No functional changes.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---
 drivers/hid/wacom_sys.c | 234 ++++++++++++++++++++++++------------------------
 1 file changed, 117 insertions(+), 117 deletions(-)

diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 92a2c81..78e9e25 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -1494,123 +1494,6 @@ static void wacom_calculate_res(struct wacom_features *features)
 						    features->unitExpo);
 }
 
-static void wacom_wireless_work(struct work_struct *work)
-{
-	struct wacom *wacom = container_of(work, struct wacom, work);
-	struct usb_device *usbdev = wacom->usbdev;
-	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
-	struct hid_device *hdev1, *hdev2;
-	struct wacom *wacom1, *wacom2;
-	struct wacom_wac *wacom_wac1, *wacom_wac2;
-	int error;
-
-	/*
-	 * Regardless if this is a disconnect or a new tablet,
-	 * remove any existing input and battery devices.
-	 */
-
-	wacom_destroy_battery(wacom);
-
-	/* Stylus interface */
-	hdev1 = usb_get_intfdata(usbdev->config->interface[1]);
-	wacom1 = hid_get_drvdata(hdev1);
-	wacom_wac1 = &(wacom1->wacom_wac);
-	wacom_clean_inputs(wacom1);
-
-	/* Touch interface */
-	hdev2 = usb_get_intfdata(usbdev->config->interface[2]);
-	wacom2 = hid_get_drvdata(hdev2);
-	wacom_wac2 = &(wacom2->wacom_wac);
-	wacom_clean_inputs(wacom2);
-
-	if (wacom_wac->pid == 0) {
-		hid_info(wacom->hdev, "wireless tablet disconnected\n");
-		wacom_wac1->shared->type = 0;
-	} else {
-		const struct hid_device_id *id = wacom_ids;
-
-		hid_info(wacom->hdev, "wireless tablet connected with PID %x\n",
-			 wacom_wac->pid);
-
-		while (id->bus) {
-			if (id->vendor == USB_VENDOR_ID_WACOM &&
-			    id->product == wacom_wac->pid)
-				break;
-			id++;
-		}
-
-		if (!id->bus) {
-			hid_info(wacom->hdev, "ignoring unknown PID.\n");
-			return;
-		}
-
-		/* Stylus interface */
-		wacom_wac1->features =
-			*((struct wacom_features *)id->driver_data);
-		wacom_wac1->features.device_type |= WACOM_DEVICETYPE_PEN;
-		wacom_set_default_phy(&wacom_wac1->features);
-		wacom_calculate_res(&wacom_wac1->features);
-		snprintf(wacom_wac1->pen_name, WACOM_NAME_MAX, "%s (WL) Pen",
-			 wacom_wac1->features.name);
-		if (wacom_wac1->features.type < BAMBOO_PEN ||
-		    wacom_wac1->features.type > BAMBOO_PT) {
-			snprintf(wacom_wac1->pad_name, WACOM_NAME_MAX, "%s (WL) Pad",
-				 wacom_wac1->features.name);
-			wacom_wac1->features.device_type |= WACOM_DEVICETYPE_PAD;
-		}
-		wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
-		wacom_wac1->shared->type = wacom_wac1->features.type;
-		wacom_wac1->pid = wacom_wac->pid;
-		error = wacom_allocate_inputs(wacom1) ||
-			wacom_register_inputs(wacom1);
-		if (error)
-			goto fail;
-
-		/* Touch interface */
-		if (wacom_wac1->features.touch_max ||
-		    (wacom_wac1->features.type >= INTUOSHT &&
-		    wacom_wac1->features.type <= BAMBOO_PT)) {
-			wacom_wac2->features =
-				*((struct wacom_features *)id->driver_data);
-			wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
-			wacom_set_default_phy(&wacom_wac2->features);
-			wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096;
-			wacom_calculate_res(&wacom_wac2->features);
-			snprintf(wacom_wac2->touch_name, WACOM_NAME_MAX,
-				 "%s (WL) Finger",wacom_wac2->features.name);
-			if (wacom_wac1->features.touch_max)
-				wacom_wac2->features.device_type |= WACOM_DEVICETYPE_TOUCH;
-			if (wacom_wac1->features.type >= INTUOSHT &&
-			    wacom_wac1->features.type <= BAMBOO_PT) {
-				snprintf(wacom_wac2->pad_name, WACOM_NAME_MAX,
-					 "%s (WL) Pad",wacom_wac2->features.name);
-				wacom_wac2->features.device_type |= WACOM_DEVICETYPE_PAD;
-			}
-			wacom_wac2->pid = wacom_wac->pid;
-			error = wacom_allocate_inputs(wacom2) ||
-				wacom_register_inputs(wacom2);
-			if (error)
-				goto fail;
-
-			if ((wacom_wac1->features.type == INTUOSHT ||
-			    wacom_wac1->features.type == INTUOSHT2) &&
-			    wacom_wac1->features.touch_max)
-				wacom_wac->shared->touch_input = wacom_wac2->touch_input;
-		}
-
-		error = wacom_initialize_battery(wacom);
-		if (error)
-			goto fail;
-	}
-
-	return;
-
-fail:
-	wacom_clean_inputs(wacom1);
-	wacom_clean_inputs(wacom2);
-	return;
-}
-
 void wacom_battery_work(struct work_struct *work)
 {
 	struct wacom *wacom = container_of(work, struct wacom, work);
@@ -1809,6 +1692,123 @@ fail_allocate_inputs:
 	return error;
 }
 
+static void wacom_wireless_work(struct work_struct *work)
+{
+	struct wacom *wacom = container_of(work, struct wacom, work);
+	struct usb_device *usbdev = wacom->usbdev;
+	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+	struct hid_device *hdev1, *hdev2;
+	struct wacom *wacom1, *wacom2;
+	struct wacom_wac *wacom_wac1, *wacom_wac2;
+	int error;
+
+	/*
+	 * Regardless if this is a disconnect or a new tablet,
+	 * remove any existing input and battery devices.
+	 */
+
+	wacom_destroy_battery(wacom);
+
+	/* Stylus interface */
+	hdev1 = usb_get_intfdata(usbdev->config->interface[1]);
+	wacom1 = hid_get_drvdata(hdev1);
+	wacom_wac1 = &(wacom1->wacom_wac);
+	wacom_clean_inputs(wacom1);
+
+	/* Touch interface */
+	hdev2 = usb_get_intfdata(usbdev->config->interface[2]);
+	wacom2 = hid_get_drvdata(hdev2);
+	wacom_wac2 = &(wacom2->wacom_wac);
+	wacom_clean_inputs(wacom2);
+
+	if (wacom_wac->pid == 0) {
+		hid_info(wacom->hdev, "wireless tablet disconnected\n");
+		wacom_wac1->shared->type = 0;
+	} else {
+		const struct hid_device_id *id = wacom_ids;
+
+		hid_info(wacom->hdev, "wireless tablet connected with PID %x\n",
+			 wacom_wac->pid);
+
+		while (id->bus) {
+			if (id->vendor == USB_VENDOR_ID_WACOM &&
+			    id->product == wacom_wac->pid)
+				break;
+			id++;
+		}
+
+		if (!id->bus) {
+			hid_info(wacom->hdev, "ignoring unknown PID.\n");
+			return;
+		}
+
+		/* Stylus interface */
+		wacom_wac1->features =
+			*((struct wacom_features *)id->driver_data);
+		wacom_wac1->features.device_type |= WACOM_DEVICETYPE_PEN;
+		wacom_set_default_phy(&wacom_wac1->features);
+		wacom_calculate_res(&wacom_wac1->features);
+		snprintf(wacom_wac1->pen_name, WACOM_NAME_MAX, "%s (WL) Pen",
+			 wacom_wac1->features.name);
+		if (wacom_wac1->features.type < BAMBOO_PEN ||
+		    wacom_wac1->features.type > BAMBOO_PT) {
+			snprintf(wacom_wac1->pad_name, WACOM_NAME_MAX,
+				 "%s (WL) Pad", wacom_wac1->features.name);
+			wacom_wac1->features.device_type |= WACOM_DEVICETYPE_PAD;
+		}
+		wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
+		wacom_wac1->shared->type = wacom_wac1->features.type;
+		wacom_wac1->pid = wacom_wac->pid;
+		error = wacom_allocate_inputs(wacom1) ||
+			wacom_register_inputs(wacom1);
+		if (error)
+			goto fail;
+
+		/* Touch interface */
+		if (wacom_wac1->features.touch_max ||
+		    (wacom_wac1->features.type >= INTUOSHT &&
+		    wacom_wac1->features.type <= BAMBOO_PT)) {
+			wacom_wac2->features =
+				*((struct wacom_features *)id->driver_data);
+			wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
+			wacom_set_default_phy(&wacom_wac2->features);
+			wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096;
+			wacom_calculate_res(&wacom_wac2->features);
+			snprintf(wacom_wac2->touch_name, WACOM_NAME_MAX,
+				 "%s (WL) Finger", wacom_wac2->features.name);
+			if (wacom_wac1->features.touch_max)
+				wacom_wac2->features.device_type |= WACOM_DEVICETYPE_TOUCH;
+			if (wacom_wac1->features.type >= INTUOSHT &&
+			    wacom_wac1->features.type <= BAMBOO_PT) {
+				snprintf(wacom_wac2->pad_name, WACOM_NAME_MAX,
+					 "%s (WL) Pad", wacom_wac2->features.name);
+				wacom_wac2->features.device_type |= WACOM_DEVICETYPE_PAD;
+			}
+			wacom_wac2->pid = wacom_wac->pid;
+			error = wacom_allocate_inputs(wacom2) ||
+				wacom_register_inputs(wacom2);
+			if (error)
+				goto fail;
+
+			if ((wacom_wac1->features.type == INTUOSHT ||
+			    wacom_wac1->features.type == INTUOSHT2) &&
+			    wacom_wac1->features.touch_max)
+				wacom_wac->shared->touch_input = wacom_wac2->touch_input;
+		}
+
+		error = wacom_initialize_battery(wacom);
+		if (error)
+			goto fail;
+	}
+
+	return;
+
+fail:
+	wacom_clean_inputs(wacom1);
+	wacom_clean_inputs(wacom2);
+	return;
+}
+
 static int wacom_probe(struct hid_device *hdev,
 		const struct hid_device_id *id)
 {
-- 
2.5.0

  parent reply	other threads:[~2016-02-12 16:28 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-12 16:27 [PATCH 0/6] HID: wacom: cleanup Benjamin Tissoires
2016-02-12 16:27 ` [PATCH 1/6] HID: wacom: break out wacom_intuos_get_tool_type Benjamin Tissoires
2016-02-12 16:27 ` [PATCH 2/6] HID: wacom: break out parsing of device and registering of input Benjamin Tissoires
2016-02-12 16:27 ` Benjamin Tissoires [this message]
2016-02-12 16:27 ` [PATCH 4/6] HID: wacom: reuse wacom_parse_and_register() in wireless_work Benjamin Tissoires
2016-02-12 16:27 ` [PATCH 5/6] HID: wacom: cleanup input devices Benjamin Tissoires
2016-02-12 16:27 ` [PATCH 6/6] HID: wacom: close the wireless receiver on remove() Benjamin Tissoires
2016-02-16 17:14 ` [PATCH 0/6] HID: wacom: cleanup Jiri Kosina
2016-02-16 19:42 ` Jiri Kosina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455294465-13694-4-git-send-email-benjamin.tissoires@redhat.com \
    --to=benjamin.tissoires@redhat.com \
    --cc=jikos@kernel.org \
    --cc=killertofu@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pinglinux@gmail.com \
    --cc=skomra@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.