All of lore.kernel.org
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Aaron Lu <aaron.lu@intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Vincent Pelletier <plr.vincent@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>,
	linux-input@vger.kernel.org, linux-gpio@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 3/3] input: gpio_keys: Make use of the device property API
Date: Fri, 19 Feb 2016 11:16:22 +0100	[thread overview]
Message-ID: <1455876982-6743-4-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1455876982-6743-1-git-send-email-geert+renesas@glider.be>

Make use of the device property API in this driver so that both OF based
systems and ACPI based systems can use this driver.

Based on commits b26d4e2283b6d9b6 ("input: gpio_keys_polled: Make use of
device property API"), 99b4ffbd84ea4191 ("Input: gpio_keys[_polled] -
change name of wakeup property"), and 1feb57a245a4910b ("gpio: add
parameter to allow the use named gpios").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Tested with DT only.
---
 drivers/input/keyboard/gpio_keys.c | 77 +++++++++++++++-----------------------
 1 file changed, 30 insertions(+), 47 deletions(-)

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index b6262d94aff19f70..5764308e3b26314a 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -27,9 +27,6 @@
 #include <linux/workqueue.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
 #include <linux/spinlock.h>
 
 struct gpio_button_data {
@@ -625,26 +622,20 @@ static void gpio_keys_close(struct input_dev *input)
  * Handlers for alternative sources of platform_data
  */
 
-#ifdef CONFIG_OF
 /*
- * Translate OpenFirmware node properties into platform_data
+ * Translate properties into platform_data
  */
 static struct gpio_keys_platform_data *
 gpio_keys_get_devtree_pdata(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *node, *pp;
 	struct gpio_keys_platform_data *pdata;
 	struct gpio_keys_button *button;
+	struct fwnode_handle *child;
 	int error;
 	int nbuttons;
-	int i;
-
-	node = dev->of_node;
-	if (!node)
-		return ERR_PTR(-ENODEV);
 
-	nbuttons = of_get_available_child_count(node);
+	nbuttons = device_get_child_node_count(dev);
 	if (nbuttons == 0)
 		return ERR_PTR(-ENODEV);
 
@@ -655,32 +646,29 @@ gpio_keys_get_devtree_pdata(struct platform_device *pdev)
 		return ERR_PTR(-ENOMEM);
 
 	pdata->buttons = (struct gpio_keys_button *)(pdata + 1);
-	pdata->nbuttons = nbuttons;
-
-	pdata->rep = !!of_get_property(node, "autorepeat", NULL);
 
-	of_property_read_string(node, "label", &pdata->name);
+	pdata->rep = device_property_present(dev, "autorepeat");
+	device_property_read_string(dev, "label", &pdata->name);
 
-	i = 0;
-	for_each_available_child_of_node(node, pp) {
-		enum of_gpio_flags flags;
+	device_for_each_child_node(dev, child) {
+		struct gpio_desc *desc;
 
-		button = &pdata->buttons[i++];
-
-		button->gpio = of_get_gpio_flags(pp, 0, &flags);
-		if (button->gpio < 0) {
-			error = button->gpio;
+		desc = devm_get_gpiod_from_child(dev, NULL, child);
+		if (IS_ERR(desc)) {
+			error = PTR_ERR(desc);
 			if (error != -ENOENT) {
 				if (error != -EPROBE_DEFER)
 					dev_err(dev,
 						"Failed to get gpio flags, error: %d\n",
 						error);
+				fwnode_handle_put(child);
 				return ERR_PTR(error);
 			}
-		} else {
-			button->active_low = flags & OF_GPIO_ACTIVE_LOW;
 		}
 
+		button = &pdata->buttons[pdata->nbuttons++];
+		button->gpiod = desc;
+
 		button->irq = platform_get_irq(pdev, 0);
 
 		if (!gpio_is_valid(button->gpio) && button->irq < 0) {
@@ -688,24 +676,29 @@ gpio_keys_get_devtree_pdata(struct platform_device *pdev)
 			return ERR_PTR(-EINVAL);
 		}
 
-		if (of_property_read_u32(pp, "linux,code", &button->code)) {
-			dev_err(dev, "Button without keycode: 0x%x\n",
-				button->gpio);
+		if (fwnode_property_read_u32(child, "linux,code",
+					     &button->code)) {
+			dev_err(dev, "Button without keycode: %d\n",
+				pdata->nbuttons - 1);
+			fwnode_handle_put(child);
 			return ERR_PTR(-EINVAL);
 		}
 
-		button->desc = of_get_property(pp, "label", NULL);
+		fwnode_property_read_string(child, "label", &button->desc);
 
-		if (of_property_read_u32(pp, "linux,input-type", &button->type))
+		if (fwnode_property_read_u32(child, "linux,input-type",
+					     &button->type))
 			button->type = EV_KEY;
 
-		button->wakeup = of_property_read_bool(pp, "wakeup-source") ||
-				 /* legacy name */
-				 of_property_read_bool(pp, "gpio-key,wakeup");
+		button->wakeup =
+			fwnode_property_read_bool(child, "wakeup-source") ||
+			 /* legacy name */
+			 fwnode_property_read_bool(child, "gpio-key,wakeup");
 
-		button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL);
+		button->can_disable =
+			fwnode_property_present(child, "linux,can-disable");
 
-		if (of_property_read_u32(pp, "debounce-interval",
+		if (fwnode_property_read_u32(child, "debounce-interval",
 					 &button->debounce_interval))
 			button->debounce_interval = 5;
 	}
@@ -722,16 +715,6 @@ static const struct of_device_id gpio_keys_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, gpio_keys_of_match);
 
-#else
-
-static inline struct gpio_keys_platform_data *
-gpio_keys_get_devtree_pdata(struct platform_device *pdev)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-#endif
-
 static int gpio_keys_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -887,7 +870,7 @@ static struct platform_driver gpio_keys_device_driver = {
 	.driver		= {
 		.name	= "gpio-keys",
 		.pm	= &gpio_keys_pm_ops,
-		.of_match_table = of_match_ptr(gpio_keys_of_match),
+		.of_match_table = gpio_keys_of_match,
 	}
 };
 
-- 
1.9.1


  parent reply	other threads:[~2016-02-19 10:16 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-19 10:16 [PATCH 0/3] input: gpio_keys: Convert to GPIO descriptors Geert Uytterhoeven
2016-02-19 10:16 ` [PATCH 1/3] input: gpio_keys: Add support for " Geert Uytterhoeven
2016-02-19 10:16 ` [PATCH 2/3] input: gpio_keys: Switch from irq_of_parse_and_map() to platform_get_irq() Geert Uytterhoeven
2016-02-23 19:35   ` Dmitry Torokhov
2016-02-19 10:16 ` Geert Uytterhoeven [this message]
2016-02-19 10:46   ` [PATCH 3/3] input: gpio_keys: Make use of the device property API Geert Uytterhoeven
2016-02-22 19:58   ` Dmitry Torokhov
2016-02-23  7:29     ` Mika Westerberg
2016-02-23 17:54       ` Dmitry Torokhov
2016-02-28  2:03     ` sergk sergk2mail
2016-02-29  8:17       ` Mika Westerberg
2016-02-29 16:24         ` sergk sergk2mail
2016-03-01  7:52           ` Mika Westerberg
2016-03-09  3:36             ` Linus Walleij
2016-03-09  8:36               ` Mika Westerberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455876982-6743-4-git-send-email-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=aaron.lu@intel.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=gnurou@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=plr.vincent@gmail.com \
    --cc=rafael.j.wysocki@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.