All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wen Congyang <wency@cn.fujitsu.com>
To: xen devel <xen-devel@lists.xen.org>,
	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
	Andrew Cooper <andrew.cooper3@citrix.com>,
	Ian Campbell <ian.campbell@citrix.com>,
	Ian Jackson <ian.jackson@eu.citrix.com>,
	Wei Liu <wei.liu2@citrix.com>
Cc: Lars Kurth <lars.kurth@citrix.com>,
	Changlong Xie <xiecl.fnst@cn.fujitsu.com>,
	Wen Congyang <wency@cn.fujitsu.com>,
	Gui Jianfeng <guijianfeng@cn.fujitsu.com>,
	Jiang Yunhong <yunhong.jiang@intel.com>,
	Dong Eddie <eddie.dong@intel.com>,
	Shriram Rajagopalan <rshriram@cs.ubc.ca>,
	Yang Hongyang <hongyang.yang@easystack.cn>
Subject: [PATCH v10 03/31] tools/libxl: Add back channel to allow migration target send data back
Date: Mon, 22 Feb 2016 10:52:07 +0800	[thread overview]
Message-ID: <1456109555-28299-4-git-send-email-wency@cn.fujitsu.com> (raw)
In-Reply-To: <1456109555-28299-1-git-send-email-wency@cn.fujitsu.com>

In COLO mode, secondary needs to send the following data to primary:
1. In libxl
   Secondary sends the following CHECKPOINT_CONTEXT to primary:
   CHECKPOINT_SVM_SUSPENDED, CHECKPOINT_SVM_READY and CHECKPOINT_SVM_RESUMED
2. In libxc
   Secondary sends the dirty pfn list to primary

But the io_fd only can be written in primary, and only can be read in
secondary. Save recv_fd in domain_suspend_state, and send_fd in
domain_create_state. Extend libxl_domain_create_restore API, add a
send_fd param to it. Add LIBXL_HAVE_CREATE_RESTORE_SEND_FD to indicate
the API change.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
 tools/libxl/libxl.c                  |  3 +--
 tools/libxl/libxl.h                  | 29 ++++++++++++++++++++++++++++-
 tools/libxl/libxl_create.c           | 10 ++++++----
 tools/libxl/libxl_internal.h         |  2 ++
 tools/libxl/xl_cmdimpl.c             |  8 +++++++-
 tools/ocaml/libs/xl/xenlight_stubs.c |  2 +-
 6 files changed, 45 insertions(+), 9 deletions(-)

diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 4cdc169..e9ab78c 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -834,7 +834,6 @@ out:
 static void remus_failover_cb(libxl__egc *egc,
                               libxl__domain_save_state *dss, int rc);
 
-/* TODO: Explicit Checkpoint acknowledgements via recv_fd. */
 int libxl_domain_remus_start(libxl_ctx *ctx, libxl_domain_remus_info *info,
                              uint32_t domid, int send_fd, int recv_fd,
                              const libxl_asyncop_how *ao_how)
@@ -871,7 +870,7 @@ int libxl_domain_remus_start(libxl_ctx *ctx, libxl_domain_remus_info *info,
     dss->callback = remus_failover_cb;
     dss->domid = domid;
     dss->fd = send_fd;
-    /* TODO do something with recv_fd */
+    dss->recv_fd = recv_fd;
     dss->type = type;
     dss->live = 1;
     dss->debug = 0;
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index f9e3ef5..5a286ec 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -639,6 +639,15 @@ typedef struct libxl__ctx libxl_ctx;
 #define LIBXL_HAVE_DOMAIN_CREATE_RESTORE_PARAMS 1
 
 /*
+ * LIBXL_HAVE_DOMAIN_CREATE_RESTORE_SEND_BACK_FD 1
+ *
+ * If this is defined, libxl_domain_create_restore()'s API has changed to
+ * include a send_back_fd param which used for libxl migration back channel
+ * during COLO.
+ */
+#define LIBXL_HAVE_DOMAIN_CREATE_RESTORE_SEND_BACK_FD 1
+
+/*
  * LIBXL_HAVE_CREATEINFO_PVH
  * If this is defined, then libxl supports creation of a PVH guest.
  */
@@ -1165,6 +1174,7 @@ int libxl_domain_create_new(libxl_ctx *ctx, libxl_domain_config *d_config,
                             LIBXL_EXTERNAL_CALLERS_ONLY;
 int libxl_domain_create_restore(libxl_ctx *ctx, libxl_domain_config *d_config,
                                 uint32_t *domid, int restore_fd,
+                                int send_back_fd,
                                 const libxl_domain_restore_params *params,
                                 const libxl_asyncop_how *ao_how,
                                 const libxl_asyncprogress_how *aop_console_how)
@@ -1185,7 +1195,7 @@ int static inline libxl_domain_create_restore_0x040200(
     libxl_domain_restore_params_init(&params);
 
     ret = libxl_domain_create_restore(
-        ctx, d_config, domid, restore_fd, &params, ao_how, aop_console_how);
+        ctx, d_config, domid, restore_fd, -1, &params, ao_how, aop_console_how);
 
     libxl_domain_restore_params_dispose(&params);
     return ret;
@@ -1193,6 +1203,23 @@ int static inline libxl_domain_create_restore_0x040200(
 
 #define libxl_domain_create_restore libxl_domain_create_restore_0x040200
 
+#elif defined(LIBXL_API_VERSION) && LIBXL_API_VERSION >= 0x040400 \
+                                 && LIBXL_API_VERSION < 0x040700
+
+int static inline libxl_domain_create_restore_0x040400(
+    libxl_ctx *ctx, libxl_domain_config *d_config,
+    uint32_t *domid, int restore_fd,
+    const libxl_domain_restore_params *params,
+    const libxl_asyncop_how *ao_how,
+    const libxl_asyncprogress_how *aop_console_how)
+    LIBXL_EXTERNAL_CALLERS_ONLY
+{
+    return libxl_domain_create_restore(ctx, d_config, domid, restore_fd,
+                                       -1, params, ao_how, aop_console_how);
+}
+
+#define libxl_domain_create_restore libxl_domain_create_restore_0x040400
+
 #endif
 
 int libxl_domain_soft_reset(libxl_ctx *ctx,
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index f1028bc..525bf85 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -1572,7 +1572,7 @@ static void domain_create_cb(libxl__egc *egc,
                              int rc, uint32_t domid);
 
 static int do_domain_create(libxl_ctx *ctx, libxl_domain_config *d_config,
-                            uint32_t *domid, int restore_fd,
+                            uint32_t *domid, int restore_fd, int send_back_fd,
                             const libxl_domain_restore_params *params,
                             const libxl_asyncop_how *ao_how,
                             const libxl_asyncprogress_how *aop_console_how)
@@ -1587,6 +1587,7 @@ static int do_domain_create(libxl_ctx *ctx, libxl_domain_config *d_config,
     libxl_domain_config_init(&cdcs->dcs.guest_config_saved);
     libxl_domain_config_copy(ctx, &cdcs->dcs.guest_config_saved, d_config);
     cdcs->dcs.restore_fd = cdcs->dcs.libxc_fd = restore_fd;
+    cdcs->dcs.send_back_fd = send_back_fd;
     if (restore_fd > -1) {
         cdcs->dcs.restore_params = *params;
         rc = libxl__fd_flags_modify_save(gc, cdcs->dcs.restore_fd,
@@ -1765,18 +1766,19 @@ int libxl_domain_create_new(libxl_ctx *ctx, libxl_domain_config *d_config,
                             const libxl_asyncop_how *ao_how,
                             const libxl_asyncprogress_how *aop_console_how)
 {
-    return do_domain_create(ctx, d_config, domid, -1, NULL,
+    return do_domain_create(ctx, d_config, domid, -1, -1, NULL,
                             ao_how, aop_console_how);
 }
 
 int libxl_domain_create_restore(libxl_ctx *ctx, libxl_domain_config *d_config,
                                 uint32_t *domid, int restore_fd,
+                                int send_back_fd,
                                 const libxl_domain_restore_params *params,
                                 const libxl_asyncop_how *ao_how,
                                 const libxl_asyncprogress_how *aop_console_how)
 {
-    return do_domain_create(ctx, d_config, domid, restore_fd, params,
-                            ao_how, aop_console_how);
+    return do_domain_create(ctx, d_config, domid, restore_fd, send_back_fd,
+                            params, ao_how, aop_console_how);
 }
 
 int libxl_domain_soft_reset(libxl_ctx *ctx,
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 53a6388..3d3e8e8 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3134,6 +3134,7 @@ struct libxl__domain_save_state {
     uint32_t domid;
     int fd;
     int fdfl; /* original flags on fd */
+    int recv_fd;
     libxl_domain_type type;
     int live;
     int debug;
@@ -3467,6 +3468,7 @@ struct libxl__domain_create_state {
     libxl_domain_config guest_config_saved; /* vanilla config */
     int restore_fd, libxc_fd;
     int restore_fdfl; /* original flags of restore_fd */
+    int send_back_fd;
     libxl_domain_restore_params restore_params;
     uint32_t domid_soft_reset;
     libxl__domain_create_cb *callback;
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 09037ca..df7268b 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -159,6 +159,7 @@ struct domain_create {
     char *extra_config; /* extra config string */
     const char *restore_file;
     int migrate_fd; /* -1 means none */
+    int send_back_fd; /* -1 means none */
     char **migration_domname_r; /* from malloc */
 };
 
@@ -2686,6 +2687,7 @@ static uint32_t create_domain(struct domain_create *dom_info)
     int config_len = 0;
     int restore_fd = -1;
     int restore_fd_to_close = -1;
+    int send_back_fd = -1;
     const libxl_asyncprogress_how *autoconnect_console_how;
     struct save_file_header hdr;
     uint32_t domid_soft_reset = INVALID_DOMID;
@@ -2703,6 +2705,7 @@ static uint32_t create_domain(struct domain_create *dom_info)
         if (migrate_fd >= 0) {
             restore_source = "<incoming migration stream>";
             restore_fd = migrate_fd;
+            send_back_fd = dom_info->send_back_fd;
         } else {
             restore_source = restore_file;
             restore_fd = open(restore_file, O_RDONLY);
@@ -2891,7 +2894,7 @@ start:
 
         ret = libxl_domain_create_restore(ctx, &d_config,
                                           &domid, restore_fd,
-                                          &params,
+                                          send_back_fd, &params,
                                           0, autoconnect_console_how);
 
         libxl_domain_restore_params_dispose(&params);
@@ -4454,6 +4457,7 @@ static void migrate_receive(int debug, int daemonize, int monitor,
     dom_info.monitor = monitor;
     dom_info.paused = 1;
     dom_info.migrate_fd = recv_fd;
+    dom_info.send_back_fd = send_fd;
     dom_info.migration_domname_r = &migration_domname;
     dom_info.checkpointed_stream = checkpointed;
 
@@ -4627,6 +4631,7 @@ int main_restore(int argc, char **argv)
     dom_info.config_file = config_file;
     dom_info.restore_file = checkpoint_file;
     dom_info.migrate_fd = -1;
+    dom_info.send_back_fd = -1;
     dom_info.vnc = vnc;
     dom_info.vncautopass = vncautopass;
     dom_info.console_autoconnect = console_autoconnect;
@@ -5094,6 +5099,7 @@ int main_create(int argc, char **argv)
     dom_info.quiet = quiet;
     dom_info.config_file = filename;
     dom_info.migrate_fd = -1;
+    dom_info.send_back_fd = -1;
     dom_info.vnc = vnc;
     dom_info.vncautopass = vncautopass;
     dom_info.console_autoconnect = console_autoconnect;
diff --git a/tools/ocaml/libs/xl/xenlight_stubs.c b/tools/ocaml/libs/xl/xenlight_stubs.c
index 4133527..98b52b9 100644
--- a/tools/ocaml/libs/xl/xenlight_stubs.c
+++ b/tools/ocaml/libs/xl/xenlight_stubs.c
@@ -538,7 +538,7 @@ value stub_libxl_domain_create_restore(value ctx, value domain_config, value par
 
 	caml_enter_blocking_section();
 	ret = libxl_domain_create_restore(CTX, &c_dconfig, &c_domid, restore_fd,
-		&c_params, ao_how, NULL);
+		-1, &c_params, ao_how, NULL);
 	caml_leave_blocking_section();
 
 	free(ao_how);
-- 
2.5.0

  parent reply	other threads:[~2016-02-22  2:52 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-22  2:52 [PATCH v10 00/31] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Wen Congyang
2016-02-22  2:52 ` [PATCH v10 01/31] tools/libxl: introduce libxl__domain_restore_device_model to load qemu state Wen Congyang
2016-02-25 15:53   ` Wei Liu
2016-02-26  1:55     ` Wen Congyang
2016-02-22  2:52 ` [PATCH v10 02/31] tools/libxl: introduce libxl__domain_common_switch_qemu_logdirty() Wen Congyang
2016-02-22  2:52 ` Wen Congyang [this message]
2016-02-22  2:52 ` [PATCH v10 04/31] tools/libxl: Introduce new helper function dup_fd_helper() Wen Congyang
2016-02-25 15:53   ` Wei Liu
2016-02-22  2:52 ` [PATCH v10 05/31] tools/libx{l, c}: add back channel to libxc Wen Congyang
2016-02-25 15:54   ` Wei Liu
2016-02-22  2:52 ` [PATCH v10 06/31] docs: add colo readme Wen Congyang
2016-02-25 15:54   ` Wei Liu
2016-02-22  2:52 ` [PATCH v10 07/31] docs/libxl: Introduce CHECKPOINT_CONTEXT to support migration v2 colo streams Wen Congyang
2016-02-25 15:54   ` Wei Liu
2016-02-26  1:59     ` Wen Congyang
2016-02-22  2:52 ` [PATCH v10 08/31] libxc/migration: Specification update for DIRTY_PFN_LIST records Wen Congyang
2016-02-22  2:52 ` [PATCH v10 09/31] libxc/migration: export read_record for common use Wen Congyang
2016-02-22  2:52 ` [PATCH v10 10/31] tools/libxl: add back channel support to write stream Wen Congyang
2016-02-25 15:54   ` Wei Liu
2016-02-26  2:11     ` Wen Congyang
2016-03-02 15:02       ` Wei Liu
2016-03-03  1:25         ` Wen Congyang
2016-02-22  2:52 ` [PATCH v10 11/31] tools/libxl: write checkpoint_state records into the stream Wen Congyang
2016-02-22  2:52 ` [PATCH v10 12/31] tools/libxl: add back channel support to read stream Wen Congyang
2016-02-25 15:54   ` Wei Liu
2016-02-26  2:16     ` Wen Congyang
2016-03-02 15:03       ` Wei Liu
2016-02-22  2:52 ` [PATCH v10 13/31] tools/libxl: handle checkpoint_state records in a libxl migration v2 " Wen Congyang
2016-02-22  2:52 ` [PATCH v10 14/31] tools/libx{l, c}: introduce wait_checkpoint callback Wen Congyang
2016-02-22  2:52 ` [PATCH v10 15/31] tools/libx{l, c}: add postcopy/suspend callback to restore side Wen Congyang
2016-02-22  2:52 ` [PATCH v10 16/31] secondary vm suspend/resume/checkpoint code Wen Congyang
2016-02-25 15:56   ` Wei Liu
2016-02-26  2:30     ` Wen Congyang
2016-03-01 10:06     ` Wen Congyang
2016-02-22  2:52 ` [PATCH v10 17/31] primary " Wen Congyang
2016-02-25 15:57   ` Wei Liu
2016-02-26  2:32     ` Wen Congyang
2016-02-22  2:52 ` [PATCH v10 18/31] libxc/restore: support COLO restore Wen Congyang
2016-02-25 15:57   ` Wei Liu
2016-02-26  2:33     ` Wen Congyang
2016-02-22  2:52 ` [PATCH v10 19/31] libxc/restore: send dirty pfn list to primary when checkpoint under colo Wen Congyang
2016-02-22  2:52 ` [PATCH v10 20/31] send store gfn and console gfn to xl before resuming secondary vm Wen Congyang
2016-02-22  2:52 ` [PATCH v10 21/31] libxc/save: support COLO save Wen Congyang
2016-02-25 15:58   ` Wei Liu
2016-02-26  2:35     ` Wen Congyang
2016-02-22  2:52 ` [PATCH v10 22/31] implement the cmdline for COLO Wen Congyang
2016-03-02 15:03   ` Wei Liu
2016-03-03  1:30     ` Wen Congyang
2016-02-22  2:52 ` [PATCH v10 23/31] COLO: introduce new API to prepare/start/do/get_error/stop replication Wen Congyang
2016-03-02 15:03   ` Wei Liu
2016-02-22  2:52 ` [PATCH v10 24/31] Support colo mode for qemu disk Wen Congyang
2016-03-02 15:04   ` Wei Liu
2016-03-03  1:40     ` Wen Congyang
2016-02-22  2:52 ` [PATCH v10 25/31] COLO: use qemu block replication Wen Congyang
2016-03-02 15:03   ` Wei Liu
2016-02-22  2:52 ` [PATCH v10 26/31] COLO proxy: implement setup/teardown of COLO proxy module Wen Congyang
2016-03-02 15:04   ` Wei Liu
2016-03-11 22:25   ` Konrad Rzeszutek Wilk
2016-03-14  9:13     ` Wen Congyang
2016-03-22  3:40       ` Changlong Xie
2016-02-22  2:52 ` [PATCH v10 27/31] COLO proxy: preresume, postresume and checkpoint Wen Congyang
2016-03-02 15:04   ` Wei Liu
2016-02-22  2:52 ` [PATCH v10 28/31] COLO nic: implement COLO nic subkind Wen Congyang
2016-03-02 15:04   ` Wei Liu
2016-02-22  2:52 ` [PATCH v10 29/31] setup and control colo proxy on primary side Wen Congyang
2016-02-22  2:52 ` [PATCH v10 30/31] setup and control colo proxy on secondary side Wen Congyang
2016-02-22  2:52 ` [PATCH v10 31/31] cmdline switches and config vars to control colo-proxy Wen Congyang
2016-03-02 15:05   ` Wei Liu
2016-03-03  1:41     ` Wen Congyang
2016-02-25 16:05 ` [PATCH v10 00/31] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Wei Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456109555-28299-4-git-send-email-wency@cn.fujitsu.com \
    --to=wency@cn.fujitsu.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=eddie.dong@intel.com \
    --cc=guijianfeng@cn.fujitsu.com \
    --cc=hongyang.yang@easystack.cn \
    --cc=ian.campbell@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=konrad.wilk@oracle.com \
    --cc=lars.kurth@citrix.com \
    --cc=rshriram@cs.ubc.ca \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xen.org \
    --cc=xiecl.fnst@cn.fujitsu.com \
    --cc=yunhong.jiang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.