From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> To: horms@verge.net.au, magnus.damm@gmail.com, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org Cc: devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Subject: [PATCH/RFC v2 5/9] arm64: dts: r8a7795: add USB2.0 Host (EHCI/OHCI) device nodes Date: Mon, 22 Feb 2016 18:58:04 +0900 [thread overview] Message-ID: <1456135088-7976-6-git-send-email-yoshihiro.shimoda.uh@renesas.com> (raw) In-Reply-To: <1456135088-7976-1-git-send-email-yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 66 ++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 2203b8e..75142f3 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -1434,5 +1434,71 @@ #phy-cells = <0>; status = "disabled"; }; + + ehci0: usb@ee080100 { + compatible = "renesas,ehci-r8a7795", "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@ee0a0100 { + compatible = "renesas,ehci-r8a7795", "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci2: usb@ee0c0100 { + compatible = "renesas,ehci-r8a7795", "generic-ehci"; + reg = <0 0xee0c0100 0 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 701>; + phys = <&usb2_phy2>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "renesas,ohci-r8a7795", "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@ee0a0000 { + compatible = "renesas,ohci-r8a7795", "generic-ohci"; + reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci2: usb@ee0c0000 { + compatible = "renesas,ohci-r8a7795", "generic-ohci"; + reg = <0 0xee0c0000 0 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 701>; + phys = <&usb2_phy2>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; }; }; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> To: <horms@verge.net.au>, <magnus.damm@gmail.com>, <robh+dt@kernel.org>, <pawel.moll@arm.com>, <mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>, <galak@codeaurora.org> Cc: <devicetree@vger.kernel.org>, <linux-renesas-soc@vger.kernel.org>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Subject: [PATCH/RFC v2 5/9] arm64: dts: r8a7795: add USB2.0 Host (EHCI/OHCI) device nodes Date: Mon, 22 Feb 2016 18:58:04 +0900 [thread overview] Message-ID: <1456135088-7976-6-git-send-email-yoshihiro.shimoda.uh@renesas.com> (raw) In-Reply-To: <1456135088-7976-1-git-send-email-yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 66 ++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 2203b8e..75142f3 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -1434,5 +1434,71 @@ #phy-cells = <0>; status = "disabled"; }; + + ehci0: usb@ee080100 { + compatible = "renesas,ehci-r8a7795", "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@ee0a0100 { + compatible = "renesas,ehci-r8a7795", "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci2: usb@ee0c0100 { + compatible = "renesas,ehci-r8a7795", "generic-ehci"; + reg = <0 0xee0c0100 0 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 701>; + phys = <&usb2_phy2>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "renesas,ohci-r8a7795", "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@ee0a0000 { + compatible = "renesas,ohci-r8a7795", "generic-ohci"; + reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci2: usb@ee0c0000 { + compatible = "renesas,ohci-r8a7795", "generic-ohci"; + reg = <0 0xee0c0000 0 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 701>; + phys = <&usb2_phy2>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; }; }; -- 1.9.1
next prev parent reply other threads:[~2016-02-22 9:58 UTC|newest] Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-02-22 9:57 [PATCH/RFC v2 0/9] Add support for USB2.0 host/peripheral on R-Car H3 Yoshihiro Shimoda 2016-02-22 9:57 ` Yoshihiro Shimoda 2016-02-22 9:58 ` [PATCH/RFC v2 1/9] phy: rcar-gen3-usb2: remove unnecesary struct rcar_gen3_data Yoshihiro Shimoda 2016-02-22 9:58 ` Yoshihiro Shimoda 2016-02-22 9:58 ` [PATCH/RFC v2 2/9] phy: rcar-gen3-usb2: Add vbus-supply to handle VBUS on/off Yoshihiro Shimoda 2016-02-22 9:58 ` Yoshihiro Shimoda 2016-02-23 21:39 ` Rob Herring 2016-02-22 9:58 ` [PATCH/RFC v2 3/9] phy: rcar-gen3-usb2: add extcon support Yoshihiro Shimoda 2016-02-22 9:58 ` Yoshihiro Shimoda 2016-02-22 9:58 ` [PATCH/RFC v2 4/9] arm64: dts: r8a7795: add usb2_phy device nodes Yoshihiro Shimoda 2016-02-22 9:58 ` Yoshihiro Shimoda 2016-02-22 9:58 ` Yoshihiro Shimoda [this message] 2016-02-22 9:58 ` [PATCH/RFC v2 5/9] arm64: dts: r8a7795: add USB2.0 Host (EHCI/OHCI) " Yoshihiro Shimoda 2016-02-22 9:58 ` [PATCH/RFC v2 6/9] arm64: dts: r8a7795: add HS-USB device node Yoshihiro Shimoda 2016-02-22 9:58 ` Yoshihiro Shimoda 2016-02-22 9:58 ` [PATCH/RFC v2 7/9] arm64: dts: salvator-x: enable usb2_phy Yoshihiro Shimoda 2016-02-22 9:58 ` Yoshihiro Shimoda 2016-02-22 9:58 ` [PATCH/RFC v2 8/9] arm64: dts: salvator-x: enable USB 2.0 Host channels Yoshihiro Shimoda 2016-02-22 9:58 ` Yoshihiro Shimoda 2016-02-22 9:58 ` [PATCH/RFC v2 9/9] arm64: dts: salvator-x: enable HS-USB Yoshihiro Shimoda 2016-02-22 9:58 ` Yoshihiro Shimoda
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1456135088-7976-6-git-send-email-yoshihiro.shimoda.uh@renesas.com \ --to=yoshihiro.shimoda.uh@renesas.com \ --cc=devicetree@vger.kernel.org \ --cc=galak@codeaurora.org \ --cc=horms@verge.net.au \ --cc=ijc+devicetree@hellion.org.uk \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=mark.rutland@arm.com \ --cc=pawel.moll@arm.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.