From: Xinliang Liu <xinliang.liu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, daniel-/w4YWyX8dFk@public.gmane.org, robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, daniel-rLtY4a/8tF1rovVCs/uTlw@public.gmane.org, architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, airlied-cv59FeDIM0c@public.gmane.org, corbet-T1hC0tSOHrs@public.gmane.org, catalin.marinas-5wv7dgnIgG8@public.gmane.org, will.deacon-5wv7dgnIgG8@public.gmane.org, emil.l.velikov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org Cc: linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org, andy.green-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, liguozhu-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org, xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org, w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org, puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org, bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org, benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, xuyiping-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org, kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org, zourongrong-hv44wF8Li93QT0dZR+AlfA@public.gmane.org, lijianhua-hv44wF8Li93QT0dZR+AlfA@public.gmane.org, sumit.semwal-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, Xinliang Liu <xinliang.liu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Subject: [PATCH v6 07/11] drm/hisilicon: Add designware dsi encoder driver Date: Fri, 26 Feb 2016 16:40:24 +0800 [thread overview] Message-ID: <1456476028-36880-8-git-send-email-xinliang.liu@linaro.org> (raw) In-Reply-To: <1456476028-36880-1-git-send-email-xinliang.liu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Add DesignWare MIPI DSI Host Controller v1.02 encoder driver for hi6220 SoC. v6: - Change "pclk_dsi" to "pclk". v5: None. v4: None. v3: - Rename file name to dw_drm_dsi.c - Make encoder type as DRM_MODE_ENCODER_DSI. - A few cleanup. v2: - Remove abtraction layer. Signed-off-by: Xinliang Liu <xinliang.liu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Signed-off-by: Xinwei Kong <kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> Signed-off-by: Andy Green <andy.green-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> --- drivers/gpu/drm/hisilicon/kirin/Kconfig | 1 + drivers/gpu/drm/hisilicon/kirin/Makefile | 3 +- drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c | 743 +++++++++++++++++++++++++++ drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h | 83 +++ 4 files changed, 829 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c create mode 100644 drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h diff --git a/drivers/gpu/drm/hisilicon/kirin/Kconfig b/drivers/gpu/drm/hisilicon/kirin/Kconfig index 3ac4b8edeac1..de0d454c5c13 100644 --- a/drivers/gpu/drm/hisilicon/kirin/Kconfig +++ b/drivers/gpu/drm/hisilicon/kirin/Kconfig @@ -4,6 +4,7 @@ config DRM_HISI_KIRIN select DRM_KMS_HELPER select DRM_GEM_CMA_HELPER select DRM_KMS_CMA_HELPER + select DRM_MIPI_DSI help Choose this option if you have a hisilicon Kirin chipsets(hi6220). If M is selected the module will be called kirin-drm. diff --git a/drivers/gpu/drm/hisilicon/kirin/Makefile b/drivers/gpu/drm/hisilicon/kirin/Makefile index 2a61ab006ddb..5dcd0d4328b6 100644 --- a/drivers/gpu/drm/hisilicon/kirin/Makefile +++ b/drivers/gpu/drm/hisilicon/kirin/Makefile @@ -1,4 +1,5 @@ kirin-drm-y := kirin_drm_drv.o \ - kirin_drm_ade.o + kirin_drm_ade.o \ + dw_drm_dsi.o obj-$(CONFIG_DRM_HISI_KIRIN) += kirin-drm.o diff --git a/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c b/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c new file mode 100644 index 000000000000..8329148cc89d --- /dev/null +++ b/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c @@ -0,0 +1,743 @@ +/* + * DesignWare MIPI DSI Host Controller v1.02 driver + * + * Copyright (c) 2016 Linaro Limited. + * Copyright (c) 2014-2016 Hisilicon Limited. + * + * Author: + * Xinliang Liu <z.liuxinliang-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> + * Xinliang Liu <xinliang.liu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> + * Xinwei Kong <kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/clk.h> +#include <linux/component.h> +#include <linux/of_graph.h> + +#include <drm/drm_of.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_encoder_slave.h> +#include <drm/drm_atomic_helper.h> + +#include "dw_dsi_reg.h" + +#define MAX_TX_ESC_CLK (10) +#define ROUND(x, y) ((x) / (y) + ((x) % (y) * 10 / (y) >= 5 ? 1 : 0)) +#define PHY_REF_CLK_RATE 19200000 +#define PHY_REF_CLK_PERIOD_PS (1000000000 / (PHY_REF_CLK_RATE / 1000)) + +#define encoder_to_dsi(encoder) \ + container_of(encoder, struct dw_dsi, encoder) +#define host_to_dsi(host) \ + container_of(host, struct dw_dsi, host) + +struct mipi_phy_params { + u32 clk_t_lpx; + u32 clk_t_hs_prepare; + u32 clk_t_hs_zero; + u32 clk_t_hs_trial; + u32 clk_t_wakeup; + u32 data_t_lpx; + u32 data_t_hs_prepare; + u32 data_t_hs_zero; + u32 data_t_hs_trial; + u32 data_t_ta_go; + u32 data_t_ta_get; + u32 data_t_wakeup; + u32 hstx_ckg_sel; + u32 pll_fbd_div5f; + u32 pll_fbd_div1f; + u32 pll_fbd_2p; + u32 pll_enbwt; + u32 pll_fbd_p; + u32 pll_fbd_s; + u32 pll_pre_div1p; + u32 pll_pre_p; + u32 pll_vco_750M; + u32 pll_lpf_rs; + u32 pll_lpf_cs; + u32 clklp2hs_time; + u32 clkhs2lp_time; + u32 lp2hs_time; + u32 hs2lp_time; + u32 clk_to_data_delay; + u32 data_to_clk_delay; + u32 lane_byte_clk_kHz; + u32 clk_division; +}; + +struct dsi_hw_ctx { + void __iomem *base; + struct clk *pclk; +}; + +struct dw_dsi { + struct drm_encoder encoder; + struct drm_display_mode cur_mode; + struct dsi_hw_ctx *ctx; + struct mipi_phy_params phy; + + u32 lanes; + enum mipi_dsi_pixel_format format; + unsigned long mode_flags; + bool enable; +}; + +struct dsi_data { + struct dw_dsi dsi; + struct dsi_hw_ctx ctx; +}; + +struct dsi_phy_range { + u32 min_range_kHz; + u32 max_range_kHz; + u32 pll_vco_750M; + u32 hstx_ckg_sel; +}; + +static const struct dsi_phy_range dphy_range_info[] = { + { 46875, 62500, 1, 7 }, + { 62500, 93750, 0, 7 }, + { 93750, 125000, 1, 6 }, + { 125000, 187500, 0, 6 }, + { 187500, 250000, 1, 5 }, + { 250000, 375000, 0, 5 }, + { 375000, 500000, 1, 4 }, + { 500000, 750000, 0, 4 }, + { 750000, 1000000, 1, 0 }, + { 1000000, 1500000, 0, 0 } +}; + +static void dsi_get_phy_params(u32 phy_freq_kHz, + struct mipi_phy_params *phy) +{ + u32 ui = 0; + u32 cfg_clk_ps = PHY_REF_CLK_PERIOD_PS; + u32 i = 0; + u32 q_pll = 1; + u32 m_pll = 0; + u32 n_pll = 0; + u32 r_pll = 1; + u32 m_n = 0; + u32 m_n_int = 0; + u64 f_kHz; + u64 temp; + u64 tmp_kHz = phy_freq_kHz; + + do { + f_kHz = tmp_kHz; + + /* Find the PLL clock range from the table */ + for (i = 0; i < ARRAY_SIZE(dphy_range_info); i++) + if (f_kHz >= dphy_range_info[i].min_range_kHz && + f_kHz <= dphy_range_info[i].max_range_kHz) + break; + + if (i == ARRAY_SIZE(dphy_range_info)) { + DRM_ERROR("%lldkHz out of range\n", f_kHz); + return; + } + + phy->pll_vco_750M = dphy_range_info[i].pll_vco_750M; + phy->hstx_ckg_sel = dphy_range_info[i].hstx_ckg_sel; + + if (phy->hstx_ckg_sel <= 7 && + phy->hstx_ckg_sel >= 4) + q_pll = 0x10 >> (7 - phy->hstx_ckg_sel); + + temp = f_kHz * (u64)q_pll * (u64)cfg_clk_ps; + m_n_int = temp / (u64)1000000000; + m_n = (temp % (u64)1000000000) / (u64)100000000; + + if (m_n_int % 2 == 0) { + if (m_n * 6 >= 50) { + n_pll = 2; + m_pll = (m_n_int + 1) * n_pll; + } else if (m_n * 6 >= 30) { + n_pll = 3; + m_pll = m_n_int * n_pll + 2; + } else { + n_pll = 1; + m_pll = m_n_int * n_pll; + } + } else { + if (m_n * 6 >= 50) { + n_pll = 1; + m_pll = (m_n_int + 1) * n_pll; + } else if (m_n * 6 >= 30) { + n_pll = 1; + m_pll = (m_n_int + 1) * n_pll; + } else if (m_n * 6 >= 10) { + n_pll = 3; + m_pll = m_n_int * n_pll + 1; + } else { + n_pll = 2; + m_pll = m_n_int * n_pll; + } + } + + if (n_pll == 1) { + phy->pll_fbd_p = 0; + phy->pll_pre_div1p = 1; + } else { + phy->pll_fbd_p = n_pll; + phy->pll_pre_div1p = 0; + } + + if (phy->pll_fbd_2p <= 7 && phy->pll_fbd_2p >= 4) + r_pll = 0x10 >> (7 - phy->pll_fbd_2p); + + if (m_pll == 2) { + phy->pll_pre_p = 0; + phy->pll_fbd_s = 0; + phy->pll_fbd_div1f = 0; + phy->pll_fbd_div5f = 1; + } else if (m_pll >= 2 * 2 * r_pll && m_pll <= 2 * 4 * r_pll) { + phy->pll_pre_p = m_pll / (2 * r_pll); + phy->pll_fbd_s = 0; + phy->pll_fbd_div1f = 1; + phy->pll_fbd_div5f = 0; + } else if (m_pll >= 2 * 5 * r_pll && m_pll <= 2 * 150 * r_pll) { + if (((m_pll / (2 * r_pll)) % 2) == 0) { + phy->pll_pre_p = + (m_pll / (2 * r_pll)) / 2 - 1; + phy->pll_fbd_s = + (m_pll / (2 * r_pll)) % 2 + 2; + } else { + phy->pll_pre_p = + (m_pll / (2 * r_pll)) / 2; + phy->pll_fbd_s = + (m_pll / (2 * r_pll)) % 2; + } + phy->pll_fbd_div1f = 0; + phy->pll_fbd_div5f = 0; + } else { + phy->pll_pre_p = 0; + phy->pll_fbd_s = 0; + phy->pll_fbd_div1f = 0; + phy->pll_fbd_div5f = 1; + } + + f_kHz = (u64)1000000000 * (u64)m_pll / + ((u64)cfg_clk_ps * (u64)n_pll * (u64)q_pll); + + if (f_kHz >= phy_freq_kHz) + break; + + tmp_kHz += 10; + + } while (1); + + ui = 1000000 / f_kHz; + + phy->clk_t_lpx = ROUND(50, 8 * ui); + phy->clk_t_hs_prepare = ROUND(133, 16 * ui) - 1; + + phy->clk_t_hs_zero = ROUND(262, 8 * ui); + phy->clk_t_hs_trial = 2 * (ROUND(60, 8 * ui) - 1); + phy->clk_t_wakeup = ROUND(1000000, (cfg_clk_ps / 1000) - 1); + if (phy->clk_t_wakeup > 0xff) + phy->clk_t_wakeup = 0xff; + phy->data_t_wakeup = phy->clk_t_wakeup; + phy->data_t_lpx = phy->clk_t_lpx; + phy->data_t_hs_prepare = ROUND(125 + 10 * ui, 16 * ui) - 1; + phy->data_t_hs_zero = ROUND(105 + 6 * ui, 8 * ui); + phy->data_t_hs_trial = 2 * (ROUND(60 + 4 * ui, 8 * ui) - 1); + phy->data_t_ta_go = 3; + phy->data_t_ta_get = 4; + + phy->pll_enbwt = 1; + phy->clklp2hs_time = ROUND(407, 8 * ui) + 12; + phy->clkhs2lp_time = ROUND(105 + 12 * ui, 8 * ui); + phy->lp2hs_time = ROUND(240 + 12 * ui, 8 * ui) + 1; + phy->hs2lp_time = phy->clkhs2lp_time; + phy->clk_to_data_delay = 1 + phy->clklp2hs_time; + phy->data_to_clk_delay = ROUND(60 + 52 * ui, 8 * ui) + + phy->clkhs2lp_time; + + phy->lane_byte_clk_kHz = f_kHz / 8; + phy->clk_division = phy->lane_byte_clk_kHz / MAX_TX_ESC_CLK; + if (phy->lane_byte_clk_kHz % MAX_TX_ESC_CLK) + phy->clk_division++; +} + +static u32 dsi_get_dpi_color_coding(enum mipi_dsi_pixel_format format) +{ + u32 val; + + /* TODO: only support RGB888 now, to support more */ + switch (format) { + case MIPI_DSI_FMT_RGB888: + val = DSI_24BITS_1; + break; + default: + val = DSI_24BITS_1; + break; + } + + return val; +} + +/* + * dsi phy reg write function + */ +static void dsi_phy_tst_set(void __iomem *base, u32 reg, u32 val) +{ + writel(reg, base + PHY_TST_CTRL1); + /* reg addr written at first */ + wmb(); + writel(0x02, base + PHY_TST_CTRL0); + /* cmd1 sent for write */ + wmb(); + writel(0x00, base + PHY_TST_CTRL0); + /* cmd2 sent for write */ + wmb(); + writel(val, base + PHY_TST_CTRL1); + /* Then write data */ + wmb(); + writel(0x02, base + PHY_TST_CTRL0); + /* cmd2 sent for write */ + wmb(); + writel(0x00, base + PHY_TST_CTRL0); +} + +static void dsi_set_mipi_phy(void __iomem *base, + struct mipi_phy_params *phy, + u32 lanes) +{ + u32 delay_count; + u32 val; + u32 i; + + /* set lanes value */ + val = (lanes - 1) | (PHY_STOP_WAIT_TIME << 8); + writel(val, base + PHY_IF_CFG); + + /* set phy clk division */ + val = readl(base + CLKMGR_CFG) | phy->clk_division; + writel(val, base + CLKMGR_CFG); + + /* clean up phy set param */ + writel(0, base + PHY_RSTZ); + writel(0, base + PHY_TST_CTRL0); + writel(1, base + PHY_TST_CTRL0); + writel(0, base + PHY_TST_CTRL0); + + /* clock lane Timing control - TLPX */ + dsi_phy_tst_set(base, 0x10010, phy->clk_t_lpx); + + /* clock lane Timing control - THS-PREPARE */ + dsi_phy_tst_set(base, 0x10011, phy->clk_t_hs_prepare); + + /* clock lane Timing control - THS-ZERO */ + dsi_phy_tst_set(base, 0x10012, phy->clk_t_hs_zero); + + /* clock lane Timing control - THS-TRAIL */ + dsi_phy_tst_set(base, 0x10013, phy->clk_t_hs_trial); + + /* clock lane Timing control - TWAKEUP */ + dsi_phy_tst_set(base, 0x10014, phy->clk_t_wakeup); + + /* data lane */ + for (i = 0; i < lanes; i++) { + /* Timing control - TLPX */ + dsi_phy_tst_set(base, 0x10020 + (i << 4), phy->data_t_lpx); + + /* Timing control - THS-PREPARE */ + dsi_phy_tst_set(base, 0x10021 + (i << 4), + phy->data_t_hs_prepare); + + /* Timing control - THS-ZERO */ + dsi_phy_tst_set(base, 0x10022 + (i << 4), phy->data_t_hs_zero); + + /* Timing control - THS-TRAIL */ + dsi_phy_tst_set(base, 0x10023 + (i << 4), phy->data_t_hs_trial); + + /* Timing control - TTA-GO */ + dsi_phy_tst_set(base, 0x10024 + (i << 4), phy->data_t_ta_go); + + /* Timing control - TTA-GET */ + dsi_phy_tst_set(base, 0x10025 + (i << 4), phy->data_t_ta_get); + + /* Timing control - TWAKEUP */ + dsi_phy_tst_set(base, 0x10026 + (i << 4), phy->data_t_wakeup); + } + + /* physical configuration I */ + dsi_phy_tst_set(base, 0x10060, phy->hstx_ckg_sel); + + /* physical configuration pll II */ + val = (phy->pll_fbd_div5f << 5) + (phy->pll_fbd_div1f << 4) + + (phy->pll_fbd_2p << 1) + phy->pll_enbwt; + dsi_phy_tst_set(base, 0x10063, val); + + /* physical configuration pll II */ + dsi_phy_tst_set(base, 0x10064, phy->pll_fbd_p); + + /* physical configuration pll III */ + dsi_phy_tst_set(base, 0x10065, phy->pll_fbd_s); + + /* physical configuration pll IV */ + val = (phy->pll_pre_div1p << 7) + phy->pll_pre_p; + dsi_phy_tst_set(base, 0x10066, val); + + /* physical configuration pll V */ + val = (phy->pll_vco_750M << 4) + (phy->pll_lpf_rs << 2) + + phy->pll_lpf_cs + BIT(5); + dsi_phy_tst_set(base, 0x10067, val); + + writel(BIT(2), base + PHY_RSTZ); + udelay(1); + writel(BIT(2) | BIT(0), base + PHY_RSTZ); + udelay(1); + writel(BIT(2) | BIT(1) | BIT(0), base + PHY_RSTZ); + usleep_range(1000, 1500); + + /* wait for phy's clock ready */ + delay_count = 100; + while (delay_count--) { + val = readl(base + PHY_STATUS); + if ((BIT(0) | BIT(2)) & val) + break; + + udelay(1); + } + + if (!delay_count) + DRM_INFO("phylock and phystopstateclklane is not ready.\n"); + + /* set lp and hs switching params + */ + dw_update_bits(base + PHY_TMR_CFG, 24, MASK(8), phy->hs2lp_time); + dw_update_bits(base + PHY_TMR_CFG, 16, MASK(8), phy->lp2hs_time); + dw_update_bits(base + PHY_TMR_LPCLK_CFG, 16, MASK(10), + phy->clkhs2lp_time); + dw_update_bits(base + PHY_TMR_LPCLK_CFG, 0, MASK(10), + phy->clklp2hs_time); + dw_update_bits(base + CLK_DATA_TMR_CFG, 8, MASK(8), + phy->data_to_clk_delay); + dw_update_bits(base + CLK_DATA_TMR_CFG, 0, MASK(8), + phy->clk_to_data_delay); +} + +static void dsi_set_mode_timing(void __iomem *base, + u32 lane_byte_clk_kHz, + struct drm_display_mode *mode, + enum mipi_dsi_pixel_format format) +{ + u32 hfp, hbp, hsw, vfp, vbp, vsw; + u32 hline_time; + u32 hsa_time; + u32 hbp_time; + u32 pixel_clk_kHz; + int htot, vtot; + u32 val; + u64 tmp; + + /* DSI color coding setting */ + val = dsi_get_dpi_color_coding(format); + writel(val, base + DPI_COLOR_CODING); + + /* DSI format and pol setting */ + val = (mode->flags & DRM_MODE_FLAG_NHSYNC ? 1 : 0) << 2; + val |= (mode->flags & DRM_MODE_FLAG_NVSYNC ? 1 : 0) << 1; + writel(val, base + DPI_CFG_POL); + + /* + * The DSI IP accepts vertical timing using lines as normal, + * but horizontal timing is a mixture of pixel-clocks for the + * active region and byte-lane clocks for the blanking-related + * timings. hfp is specified as the total hline_time in byte- + * lane clocks minus hsa, hbp and active. + */ + pixel_clk_kHz = mode->clock; + htot = mode->htotal; + vtot = mode->vtotal; + hfp = mode->hsync_start - mode->hdisplay; + hbp = mode->htotal - mode->hsync_end; + hsw = mode->hsync_end - mode->hsync_start; + vfp = mode->vsync_start - mode->vdisplay; + vbp = mode->vtotal - mode->vsync_end; + vsw = mode->vsync_end - mode->vsync_start; + if (vsw > 15) { + DRM_DEBUG_DRIVER("vsw exceeded 15\n"); + vsw = 15; + } + + hsa_time = (hsw * lane_byte_clk_kHz) / pixel_clk_kHz; + hbp_time = (hbp * lane_byte_clk_kHz) / pixel_clk_kHz; + tmp = (u64)htot * (u64)lane_byte_clk_kHz; + hline_time = DIV_ROUND_UP(tmp, pixel_clk_kHz); + + /* all specified in byte-lane clocks */ + writel(hsa_time, base + VID_HSA_TIME); + writel(hbp_time, base + VID_HBP_TIME); + writel(hline_time, base + VID_HLINE_TIME); + + writel(vsw, base + VID_VSA_LINES); + writel(vbp, base + VID_VBP_LINES); + writel(vfp, base + VID_VFP_LINES); + writel(mode->vdisplay, base + VID_VACTIVE_LINES); + writel(mode->hdisplay, base + VID_PKT_SIZE); + + DRM_DEBUG_DRIVER("htot=%d, hfp=%d, hbp=%d, hsw=%d\n", + htot, hfp, hbp, hsw); + DRM_DEBUG_DRIVER("vtol=%d, vfp=%d, vbp=%d, vsw=%d\n", + vtot, vfp, vbp, vsw); + DRM_DEBUG_DRIVER("hsa_time=%d, hbp_time=%d, hline_time=%d\n", + hsa_time, hbp_time, hline_time); +} + +static void dsi_set_video_mode_type(void __iomem *base, + unsigned long flags) +{ + u32 val; + u32 mode_mask = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + u32 non_burst_sync_pulse = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + u32 non_burst_sync_event = MIPI_DSI_MODE_VIDEO; + + /* + * choose video type + */ + if ((flags & mode_mask) == non_burst_sync_pulse) + val = DSI_NON_BURST_SYNC_PULSES; + else if ((flags & mode_mask) == non_burst_sync_event) + val = DSI_NON_BURST_SYNC_EVENTS; + else + val = DSI_BURST_SYNC_PULSES_1; + + writel(val, base + VID_MODE_CFG); +} + +static void dsi_mipi_init(struct dw_dsi *dsi) +{ + struct dsi_hw_ctx *ctx = dsi->ctx; + struct mipi_phy_params *phy = &dsi->phy; + struct drm_display_mode *mode = &dsi->cur_mode; + u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); + void __iomem *base = ctx->base; + u32 dphy_freq_kHz; + + /* count phy params */ + dphy_freq_kHz = mode->clock * bpp / dsi->lanes; + dsi_get_phy_params(dphy_freq_kHz, phy); + + /* reset Core */ + writel(0, base + PWR_UP); + + /* set phy params */ + dsi_set_mipi_phy(base, phy, dsi->lanes); + + /* set dsi mode */ + dsi_set_mode_timing(base, phy->lane_byte_clk_kHz, mode, dsi->format); + + /* set video mode type and lp */ + dsi_set_video_mode_type(base, dsi->mode_flags); + + /* dsi wake up */ + writel(DSI_VIDEO_MODE, base + MODE_CFG); + writel(BIT(0), base + LPCLK_CTRL); + writel(BIT(0), base + PWR_UP); + + DRM_DEBUG_DRIVER("lanes=%d, pixel_clk=%d kHz, bytes_freq=%d kHz\n", + dsi->lanes, mode->clock, phy->lane_byte_clk_kHz); +} + +static void dsi_encoder_disable(struct drm_encoder *encoder) +{ + struct dw_dsi *dsi = encoder_to_dsi(encoder); + struct dsi_hw_ctx *ctx = dsi->ctx; + void __iomem *base = ctx->base; + + if (!dsi->enable) + return; + + writel(0, base + PWR_UP); + writel(0, base + LPCLK_CTRL); + writel(0, base + PHY_RSTZ); + clk_disable_unprepare(ctx->pclk); + + dsi->enable = false; +} + +static void dsi_encoder_enable(struct drm_encoder *encoder) +{ + struct dw_dsi *dsi = encoder_to_dsi(encoder); + struct dsi_hw_ctx *ctx = dsi->ctx; + int ret; + + if (dsi->enable) + return; + + /* mipi dphy clock enable */ + ret = clk_prepare_enable(ctx->pclk); + if (ret) { + DRM_ERROR("fail to enable pclk: %d\n", ret); + return; + } + + dsi_mipi_init(dsi); + + dsi->enable = true; +} + +static void dsi_encoder_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adj_mode) +{ + struct dw_dsi *dsi = encoder_to_dsi(encoder); + + drm_mode_copy(&dsi->cur_mode, adj_mode); +} + +static int dsi_encoder_atomic_check(struct drm_encoder *encoder, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + /* do nothing */ + return 0; +} + +static const struct drm_encoder_helper_funcs dw_encoder_helper_funcs = { + .atomic_check = dsi_encoder_atomic_check, + .mode_set = dsi_encoder_mode_set, + .enable = dsi_encoder_enable, + .disable = dsi_encoder_disable +}; + +static const struct drm_encoder_funcs dw_encoder_funcs = { + .destroy = drm_encoder_cleanup, +}; + +static int dw_drm_encoder_init(struct device *dev, + struct drm_device *drm_dev, + struct drm_encoder *encoder) +{ + int ret; + u32 crtc_mask = drm_of_find_possible_crtcs(drm_dev, dev->of_node); + + if (!crtc_mask) { + DRM_ERROR("failed to find crtc mask\n"); + return -EINVAL; + } + + encoder->possible_crtcs = crtc_mask; + ret = drm_encoder_init(drm_dev, encoder, &dw_encoder_funcs, + DRM_MODE_ENCODER_DSI, NULL); + if (ret) { + DRM_ERROR("failed to init dsi encoder\n"); + return ret; + } + + drm_encoder_helper_add(encoder, &dw_encoder_helper_funcs); + + return 0; +} + +static int dsi_bind(struct device *dev, struct device *master, void *data) +{ + struct dsi_data *ddata = dev_get_drvdata(dev); + struct dw_dsi *dsi = &ddata->dsi; + struct drm_device *drm_dev = data; + int ret; + + ret = dw_drm_encoder_init(dev, drm_dev, &dsi->encoder); + if (ret) + return ret; + + return 0; +} + +static void dsi_unbind(struct device *dev, struct device *master, void *data) +{ + /* do nothing */ +} + +static const struct component_ops dsi_ops = { + .bind = dsi_bind, + .unbind = dsi_unbind, +}; + +static int dsi_parse_dt(struct platform_device *pdev, struct dw_dsi *dsi) +{ + struct dsi_hw_ctx *ctx = dsi->ctx; + struct resource *res; + + ctx->pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(ctx->pclk)) { + DRM_ERROR("failed to get pclk clock\n"); + return PTR_ERR(ctx->pclk); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ctx->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ctx->base)) { + DRM_ERROR("failed to remap dsi io region\n"); + return PTR_ERR(ctx->base); + } + + return 0; +} + +static int dsi_probe(struct platform_device *pdev) +{ + struct dsi_data *data; + struct dw_dsi *dsi; + struct dsi_hw_ctx *ctx; + int ret; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + DRM_ERROR("failed to allocate dsi data.\n"); + return -ENOMEM; + } + dsi = &data->dsi; + ctx = &data->ctx; + dsi->ctx = ctx; + + ret = dsi_parse_dt(pdev, dsi); + if (ret) + return ret; + + platform_set_drvdata(pdev, data); + + return component_add(&pdev->dev, &dsi_ops); +} + +static int dsi_remove(struct platform_device *pdev) +{ + component_del(&pdev->dev, &dsi_ops); + + return 0; +} + +static const struct of_device_id dsi_of_match[] = { + {.compatible = "hisilicon,hi6220-dsi"}, + { } +}; +MODULE_DEVICE_TABLE(of, dsi_of_match); + +static struct platform_driver dsi_driver = { + .probe = dsi_probe, + .remove = dsi_remove, + .driver = { + .name = "dw-dsi", + .of_match_table = dsi_of_match, + }, +}; + +module_platform_driver(dsi_driver); + +MODULE_AUTHOR("Xinliang Liu <xinliang.liu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>"); +MODULE_AUTHOR("Xinliang Liu <z.liuxinliang-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>"); +MODULE_AUTHOR("Xinwei Kong <kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>"); +MODULE_DESCRIPTION("DesignWare MIPI DSI Host Controller v1.02 driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h b/drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h new file mode 100644 index 000000000000..d3d44b7d2098 --- /dev/null +++ b/drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h @@ -0,0 +1,83 @@ +/* + * Copyright (c) 2016 Linaro Limited. + * Copyright (c) 2014-2016 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DW_DSI_REG_H__ +#define __DW_DSI_REG_H__ + +#define MASK(x) (BIT(x) - 1) + +/* + * regs + */ +#define PWR_UP 0x04 /* Core power-up */ +#define PHY_IF_CFG 0xA4 /* D-PHY interface configuration */ +#define CLKMGR_CFG 0x08 /* the internal clock dividers */ +#define PHY_RSTZ 0xA0 /* D-PHY reset control */ +#define PHY_TST_CTRL0 0xB4 /* D-PHY test interface control 0 */ +#define PHY_TST_CTRL1 0xB8 /* D-PHY test interface control 1 */ +#define DPI_VCID 0x0C /* DPI virtual channel id */ +#define DPI_COLOR_CODING 0x10 /* DPI color coding */ +#define DPI_CFG_POL 0x14 /* DPI polarity configuration */ +#define VID_HSA_TIME 0x48 /* Horizontal Sync Active time */ +#define VID_HBP_TIME 0x4C /* Horizontal Back Porch time */ +#define VID_HLINE_TIME 0x50 /* Line time */ +#define VID_VSA_LINES 0x54 /* Vertical Sync Active period */ +#define VID_VBP_LINES 0x58 /* Vertical Back Porch period */ +#define VID_VFP_LINES 0x5C /* Vertical Front Porch period */ +#define VID_VACTIVE_LINES 0x60 /* Vertical resolution */ +#define VID_PKT_SIZE 0x3C /* Video packet size */ +#define VID_MODE_CFG 0x38 /* Video mode configuration */ +#define DPI_LP_CMD_TIM 0x18 /* Low-power command timing config */ +#define PHY_TMR_CFG 0x9C /* Data lanes timing configuration */ +#define BTA_TO_CNT 0x8C /* Response timeout definition */ +#define PHY_TMR_LPCLK_CFG 0x98 /* clock lane timing configuration */ +#define CLK_DATA_TMR_CFG 0xCC +#define LPCLK_CTRL 0x94 /* Low-power in clock lane */ +#define PCKHDL_CFG 0x2C /* Packet handler configuration */ +#define EDPI_CMD_SIZE 0x64 /* Size for eDPI packets */ +#define MODE_CFG 0x34 /* Video or Command mode selection */ +#define PHY_STATUS 0xB0 /* D-PHY PPI status interface */ + +#define PHY_STOP_WAIT_TIME 0x30 + +/* + * regs relevant enum + */ +enum dpi_color_coding { + DSI_24BITS_1 = 5, +}; + +enum dsi_video_mode_type { + DSI_NON_BURST_SYNC_PULSES = 0, + DSI_NON_BURST_SYNC_EVENTS, + DSI_BURST_SYNC_PULSES_1, + DSI_BURST_SYNC_PULSES_2 +}; + +enum dsi_work_mode { + DSI_VIDEO_MODE = 0, + DSI_COMMAND_MODE +}; + +/* + * Register Write/Read Helper functions + */ +static inline void dw_update_bits(void __iomem *addr, u32 bit_start, + u32 mask, u32 val) +{ + u32 tmp, orig; + + orig = readl(addr); + tmp = orig & ~(mask << bit_start); + tmp |= (val & mask) << bit_start; + writel(tmp, addr); +} + +#endif /* __DW_DRM_DSI_H__ */ -- 2.7.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: xinliang.liu@linaro.org (Xinliang Liu) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 07/11] drm/hisilicon: Add designware dsi encoder driver Date: Fri, 26 Feb 2016 16:40:24 +0800 [thread overview] Message-ID: <1456476028-36880-8-git-send-email-xinliang.liu@linaro.org> (raw) In-Reply-To: <1456476028-36880-1-git-send-email-xinliang.liu@linaro.org> Add DesignWare MIPI DSI Host Controller v1.02 encoder driver for hi6220 SoC. v6: - Change "pclk_dsi" to "pclk". v5: None. v4: None. v3: - Rename file name to dw_drm_dsi.c - Make encoder type as DRM_MODE_ENCODER_DSI. - A few cleanup. v2: - Remove abtraction layer. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Signed-off-by: Andy Green <andy.green@linaro.org> --- drivers/gpu/drm/hisilicon/kirin/Kconfig | 1 + drivers/gpu/drm/hisilicon/kirin/Makefile | 3 +- drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c | 743 +++++++++++++++++++++++++++ drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h | 83 +++ 4 files changed, 829 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c create mode 100644 drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h diff --git a/drivers/gpu/drm/hisilicon/kirin/Kconfig b/drivers/gpu/drm/hisilicon/kirin/Kconfig index 3ac4b8edeac1..de0d454c5c13 100644 --- a/drivers/gpu/drm/hisilicon/kirin/Kconfig +++ b/drivers/gpu/drm/hisilicon/kirin/Kconfig @@ -4,6 +4,7 @@ config DRM_HISI_KIRIN select DRM_KMS_HELPER select DRM_GEM_CMA_HELPER select DRM_KMS_CMA_HELPER + select DRM_MIPI_DSI help Choose this option if you have a hisilicon Kirin chipsets(hi6220). If M is selected the module will be called kirin-drm. diff --git a/drivers/gpu/drm/hisilicon/kirin/Makefile b/drivers/gpu/drm/hisilicon/kirin/Makefile index 2a61ab006ddb..5dcd0d4328b6 100644 --- a/drivers/gpu/drm/hisilicon/kirin/Makefile +++ b/drivers/gpu/drm/hisilicon/kirin/Makefile @@ -1,4 +1,5 @@ kirin-drm-y := kirin_drm_drv.o \ - kirin_drm_ade.o + kirin_drm_ade.o \ + dw_drm_dsi.o obj-$(CONFIG_DRM_HISI_KIRIN) += kirin-drm.o diff --git a/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c b/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c new file mode 100644 index 000000000000..8329148cc89d --- /dev/null +++ b/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c @@ -0,0 +1,743 @@ +/* + * DesignWare MIPI DSI Host Controller v1.02 driver + * + * Copyright (c) 2016 Linaro Limited. + * Copyright (c) 2014-2016 Hisilicon Limited. + * + * Author: + * Xinliang Liu <z.liuxinliang@hisilicon.com> + * Xinliang Liu <xinliang.liu@linaro.org> + * Xinwei Kong <kong.kongxinwei@hisilicon.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/clk.h> +#include <linux/component.h> +#include <linux/of_graph.h> + +#include <drm/drm_of.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_encoder_slave.h> +#include <drm/drm_atomic_helper.h> + +#include "dw_dsi_reg.h" + +#define MAX_TX_ESC_CLK (10) +#define ROUND(x, y) ((x) / (y) + ((x) % (y) * 10 / (y) >= 5 ? 1 : 0)) +#define PHY_REF_CLK_RATE 19200000 +#define PHY_REF_CLK_PERIOD_PS (1000000000 / (PHY_REF_CLK_RATE / 1000)) + +#define encoder_to_dsi(encoder) \ + container_of(encoder, struct dw_dsi, encoder) +#define host_to_dsi(host) \ + container_of(host, struct dw_dsi, host) + +struct mipi_phy_params { + u32 clk_t_lpx; + u32 clk_t_hs_prepare; + u32 clk_t_hs_zero; + u32 clk_t_hs_trial; + u32 clk_t_wakeup; + u32 data_t_lpx; + u32 data_t_hs_prepare; + u32 data_t_hs_zero; + u32 data_t_hs_trial; + u32 data_t_ta_go; + u32 data_t_ta_get; + u32 data_t_wakeup; + u32 hstx_ckg_sel; + u32 pll_fbd_div5f; + u32 pll_fbd_div1f; + u32 pll_fbd_2p; + u32 pll_enbwt; + u32 pll_fbd_p; + u32 pll_fbd_s; + u32 pll_pre_div1p; + u32 pll_pre_p; + u32 pll_vco_750M; + u32 pll_lpf_rs; + u32 pll_lpf_cs; + u32 clklp2hs_time; + u32 clkhs2lp_time; + u32 lp2hs_time; + u32 hs2lp_time; + u32 clk_to_data_delay; + u32 data_to_clk_delay; + u32 lane_byte_clk_kHz; + u32 clk_division; +}; + +struct dsi_hw_ctx { + void __iomem *base; + struct clk *pclk; +}; + +struct dw_dsi { + struct drm_encoder encoder; + struct drm_display_mode cur_mode; + struct dsi_hw_ctx *ctx; + struct mipi_phy_params phy; + + u32 lanes; + enum mipi_dsi_pixel_format format; + unsigned long mode_flags; + bool enable; +}; + +struct dsi_data { + struct dw_dsi dsi; + struct dsi_hw_ctx ctx; +}; + +struct dsi_phy_range { + u32 min_range_kHz; + u32 max_range_kHz; + u32 pll_vco_750M; + u32 hstx_ckg_sel; +}; + +static const struct dsi_phy_range dphy_range_info[] = { + { 46875, 62500, 1, 7 }, + { 62500, 93750, 0, 7 }, + { 93750, 125000, 1, 6 }, + { 125000, 187500, 0, 6 }, + { 187500, 250000, 1, 5 }, + { 250000, 375000, 0, 5 }, + { 375000, 500000, 1, 4 }, + { 500000, 750000, 0, 4 }, + { 750000, 1000000, 1, 0 }, + { 1000000, 1500000, 0, 0 } +}; + +static void dsi_get_phy_params(u32 phy_freq_kHz, + struct mipi_phy_params *phy) +{ + u32 ui = 0; + u32 cfg_clk_ps = PHY_REF_CLK_PERIOD_PS; + u32 i = 0; + u32 q_pll = 1; + u32 m_pll = 0; + u32 n_pll = 0; + u32 r_pll = 1; + u32 m_n = 0; + u32 m_n_int = 0; + u64 f_kHz; + u64 temp; + u64 tmp_kHz = phy_freq_kHz; + + do { + f_kHz = tmp_kHz; + + /* Find the PLL clock range from the table */ + for (i = 0; i < ARRAY_SIZE(dphy_range_info); i++) + if (f_kHz >= dphy_range_info[i].min_range_kHz && + f_kHz <= dphy_range_info[i].max_range_kHz) + break; + + if (i == ARRAY_SIZE(dphy_range_info)) { + DRM_ERROR("%lldkHz out of range\n", f_kHz); + return; + } + + phy->pll_vco_750M = dphy_range_info[i].pll_vco_750M; + phy->hstx_ckg_sel = dphy_range_info[i].hstx_ckg_sel; + + if (phy->hstx_ckg_sel <= 7 && + phy->hstx_ckg_sel >= 4) + q_pll = 0x10 >> (7 - phy->hstx_ckg_sel); + + temp = f_kHz * (u64)q_pll * (u64)cfg_clk_ps; + m_n_int = temp / (u64)1000000000; + m_n = (temp % (u64)1000000000) / (u64)100000000; + + if (m_n_int % 2 == 0) { + if (m_n * 6 >= 50) { + n_pll = 2; + m_pll = (m_n_int + 1) * n_pll; + } else if (m_n * 6 >= 30) { + n_pll = 3; + m_pll = m_n_int * n_pll + 2; + } else { + n_pll = 1; + m_pll = m_n_int * n_pll; + } + } else { + if (m_n * 6 >= 50) { + n_pll = 1; + m_pll = (m_n_int + 1) * n_pll; + } else if (m_n * 6 >= 30) { + n_pll = 1; + m_pll = (m_n_int + 1) * n_pll; + } else if (m_n * 6 >= 10) { + n_pll = 3; + m_pll = m_n_int * n_pll + 1; + } else { + n_pll = 2; + m_pll = m_n_int * n_pll; + } + } + + if (n_pll == 1) { + phy->pll_fbd_p = 0; + phy->pll_pre_div1p = 1; + } else { + phy->pll_fbd_p = n_pll; + phy->pll_pre_div1p = 0; + } + + if (phy->pll_fbd_2p <= 7 && phy->pll_fbd_2p >= 4) + r_pll = 0x10 >> (7 - phy->pll_fbd_2p); + + if (m_pll == 2) { + phy->pll_pre_p = 0; + phy->pll_fbd_s = 0; + phy->pll_fbd_div1f = 0; + phy->pll_fbd_div5f = 1; + } else if (m_pll >= 2 * 2 * r_pll && m_pll <= 2 * 4 * r_pll) { + phy->pll_pre_p = m_pll / (2 * r_pll); + phy->pll_fbd_s = 0; + phy->pll_fbd_div1f = 1; + phy->pll_fbd_div5f = 0; + } else if (m_pll >= 2 * 5 * r_pll && m_pll <= 2 * 150 * r_pll) { + if (((m_pll / (2 * r_pll)) % 2) == 0) { + phy->pll_pre_p = + (m_pll / (2 * r_pll)) / 2 - 1; + phy->pll_fbd_s = + (m_pll / (2 * r_pll)) % 2 + 2; + } else { + phy->pll_pre_p = + (m_pll / (2 * r_pll)) / 2; + phy->pll_fbd_s = + (m_pll / (2 * r_pll)) % 2; + } + phy->pll_fbd_div1f = 0; + phy->pll_fbd_div5f = 0; + } else { + phy->pll_pre_p = 0; + phy->pll_fbd_s = 0; + phy->pll_fbd_div1f = 0; + phy->pll_fbd_div5f = 1; + } + + f_kHz = (u64)1000000000 * (u64)m_pll / + ((u64)cfg_clk_ps * (u64)n_pll * (u64)q_pll); + + if (f_kHz >= phy_freq_kHz) + break; + + tmp_kHz += 10; + + } while (1); + + ui = 1000000 / f_kHz; + + phy->clk_t_lpx = ROUND(50, 8 * ui); + phy->clk_t_hs_prepare = ROUND(133, 16 * ui) - 1; + + phy->clk_t_hs_zero = ROUND(262, 8 * ui); + phy->clk_t_hs_trial = 2 * (ROUND(60, 8 * ui) - 1); + phy->clk_t_wakeup = ROUND(1000000, (cfg_clk_ps / 1000) - 1); + if (phy->clk_t_wakeup > 0xff) + phy->clk_t_wakeup = 0xff; + phy->data_t_wakeup = phy->clk_t_wakeup; + phy->data_t_lpx = phy->clk_t_lpx; + phy->data_t_hs_prepare = ROUND(125 + 10 * ui, 16 * ui) - 1; + phy->data_t_hs_zero = ROUND(105 + 6 * ui, 8 * ui); + phy->data_t_hs_trial = 2 * (ROUND(60 + 4 * ui, 8 * ui) - 1); + phy->data_t_ta_go = 3; + phy->data_t_ta_get = 4; + + phy->pll_enbwt = 1; + phy->clklp2hs_time = ROUND(407, 8 * ui) + 12; + phy->clkhs2lp_time = ROUND(105 + 12 * ui, 8 * ui); + phy->lp2hs_time = ROUND(240 + 12 * ui, 8 * ui) + 1; + phy->hs2lp_time = phy->clkhs2lp_time; + phy->clk_to_data_delay = 1 + phy->clklp2hs_time; + phy->data_to_clk_delay = ROUND(60 + 52 * ui, 8 * ui) + + phy->clkhs2lp_time; + + phy->lane_byte_clk_kHz = f_kHz / 8; + phy->clk_division = phy->lane_byte_clk_kHz / MAX_TX_ESC_CLK; + if (phy->lane_byte_clk_kHz % MAX_TX_ESC_CLK) + phy->clk_division++; +} + +static u32 dsi_get_dpi_color_coding(enum mipi_dsi_pixel_format format) +{ + u32 val; + + /* TODO: only support RGB888 now, to support more */ + switch (format) { + case MIPI_DSI_FMT_RGB888: + val = DSI_24BITS_1; + break; + default: + val = DSI_24BITS_1; + break; + } + + return val; +} + +/* + * dsi phy reg write function + */ +static void dsi_phy_tst_set(void __iomem *base, u32 reg, u32 val) +{ + writel(reg, base + PHY_TST_CTRL1); + /* reg addr written at first */ + wmb(); + writel(0x02, base + PHY_TST_CTRL0); + /* cmd1 sent for write */ + wmb(); + writel(0x00, base + PHY_TST_CTRL0); + /* cmd2 sent for write */ + wmb(); + writel(val, base + PHY_TST_CTRL1); + /* Then write data */ + wmb(); + writel(0x02, base + PHY_TST_CTRL0); + /* cmd2 sent for write */ + wmb(); + writel(0x00, base + PHY_TST_CTRL0); +} + +static void dsi_set_mipi_phy(void __iomem *base, + struct mipi_phy_params *phy, + u32 lanes) +{ + u32 delay_count; + u32 val; + u32 i; + + /* set lanes value */ + val = (lanes - 1) | (PHY_STOP_WAIT_TIME << 8); + writel(val, base + PHY_IF_CFG); + + /* set phy clk division */ + val = readl(base + CLKMGR_CFG) | phy->clk_division; + writel(val, base + CLKMGR_CFG); + + /* clean up phy set param */ + writel(0, base + PHY_RSTZ); + writel(0, base + PHY_TST_CTRL0); + writel(1, base + PHY_TST_CTRL0); + writel(0, base + PHY_TST_CTRL0); + + /* clock lane Timing control - TLPX */ + dsi_phy_tst_set(base, 0x10010, phy->clk_t_lpx); + + /* clock lane Timing control - THS-PREPARE */ + dsi_phy_tst_set(base, 0x10011, phy->clk_t_hs_prepare); + + /* clock lane Timing control - THS-ZERO */ + dsi_phy_tst_set(base, 0x10012, phy->clk_t_hs_zero); + + /* clock lane Timing control - THS-TRAIL */ + dsi_phy_tst_set(base, 0x10013, phy->clk_t_hs_trial); + + /* clock lane Timing control - TWAKEUP */ + dsi_phy_tst_set(base, 0x10014, phy->clk_t_wakeup); + + /* data lane */ + for (i = 0; i < lanes; i++) { + /* Timing control - TLPX */ + dsi_phy_tst_set(base, 0x10020 + (i << 4), phy->data_t_lpx); + + /* Timing control - THS-PREPARE */ + dsi_phy_tst_set(base, 0x10021 + (i << 4), + phy->data_t_hs_prepare); + + /* Timing control - THS-ZERO */ + dsi_phy_tst_set(base, 0x10022 + (i << 4), phy->data_t_hs_zero); + + /* Timing control - THS-TRAIL */ + dsi_phy_tst_set(base, 0x10023 + (i << 4), phy->data_t_hs_trial); + + /* Timing control - TTA-GO */ + dsi_phy_tst_set(base, 0x10024 + (i << 4), phy->data_t_ta_go); + + /* Timing control - TTA-GET */ + dsi_phy_tst_set(base, 0x10025 + (i << 4), phy->data_t_ta_get); + + /* Timing control - TWAKEUP */ + dsi_phy_tst_set(base, 0x10026 + (i << 4), phy->data_t_wakeup); + } + + /* physical configuration I */ + dsi_phy_tst_set(base, 0x10060, phy->hstx_ckg_sel); + + /* physical configuration pll II */ + val = (phy->pll_fbd_div5f << 5) + (phy->pll_fbd_div1f << 4) + + (phy->pll_fbd_2p << 1) + phy->pll_enbwt; + dsi_phy_tst_set(base, 0x10063, val); + + /* physical configuration pll II */ + dsi_phy_tst_set(base, 0x10064, phy->pll_fbd_p); + + /* physical configuration pll III */ + dsi_phy_tst_set(base, 0x10065, phy->pll_fbd_s); + + /* physical configuration pll IV */ + val = (phy->pll_pre_div1p << 7) + phy->pll_pre_p; + dsi_phy_tst_set(base, 0x10066, val); + + /* physical configuration pll V */ + val = (phy->pll_vco_750M << 4) + (phy->pll_lpf_rs << 2) + + phy->pll_lpf_cs + BIT(5); + dsi_phy_tst_set(base, 0x10067, val); + + writel(BIT(2), base + PHY_RSTZ); + udelay(1); + writel(BIT(2) | BIT(0), base + PHY_RSTZ); + udelay(1); + writel(BIT(2) | BIT(1) | BIT(0), base + PHY_RSTZ); + usleep_range(1000, 1500); + + /* wait for phy's clock ready */ + delay_count = 100; + while (delay_count--) { + val = readl(base + PHY_STATUS); + if ((BIT(0) | BIT(2)) & val) + break; + + udelay(1); + } + + if (!delay_count) + DRM_INFO("phylock and phystopstateclklane is not ready.\n"); + + /* set lp and hs switching params + */ + dw_update_bits(base + PHY_TMR_CFG, 24, MASK(8), phy->hs2lp_time); + dw_update_bits(base + PHY_TMR_CFG, 16, MASK(8), phy->lp2hs_time); + dw_update_bits(base + PHY_TMR_LPCLK_CFG, 16, MASK(10), + phy->clkhs2lp_time); + dw_update_bits(base + PHY_TMR_LPCLK_CFG, 0, MASK(10), + phy->clklp2hs_time); + dw_update_bits(base + CLK_DATA_TMR_CFG, 8, MASK(8), + phy->data_to_clk_delay); + dw_update_bits(base + CLK_DATA_TMR_CFG, 0, MASK(8), + phy->clk_to_data_delay); +} + +static void dsi_set_mode_timing(void __iomem *base, + u32 lane_byte_clk_kHz, + struct drm_display_mode *mode, + enum mipi_dsi_pixel_format format) +{ + u32 hfp, hbp, hsw, vfp, vbp, vsw; + u32 hline_time; + u32 hsa_time; + u32 hbp_time; + u32 pixel_clk_kHz; + int htot, vtot; + u32 val; + u64 tmp; + + /* DSI color coding setting */ + val = dsi_get_dpi_color_coding(format); + writel(val, base + DPI_COLOR_CODING); + + /* DSI format and pol setting */ + val = (mode->flags & DRM_MODE_FLAG_NHSYNC ? 1 : 0) << 2; + val |= (mode->flags & DRM_MODE_FLAG_NVSYNC ? 1 : 0) << 1; + writel(val, base + DPI_CFG_POL); + + /* + * The DSI IP accepts vertical timing using lines as normal, + * but horizontal timing is a mixture of pixel-clocks for the + * active region and byte-lane clocks for the blanking-related + * timings. hfp is specified as the total hline_time in byte- + * lane clocks minus hsa, hbp and active. + */ + pixel_clk_kHz = mode->clock; + htot = mode->htotal; + vtot = mode->vtotal; + hfp = mode->hsync_start - mode->hdisplay; + hbp = mode->htotal - mode->hsync_end; + hsw = mode->hsync_end - mode->hsync_start; + vfp = mode->vsync_start - mode->vdisplay; + vbp = mode->vtotal - mode->vsync_end; + vsw = mode->vsync_end - mode->vsync_start; + if (vsw > 15) { + DRM_DEBUG_DRIVER("vsw exceeded 15\n"); + vsw = 15; + } + + hsa_time = (hsw * lane_byte_clk_kHz) / pixel_clk_kHz; + hbp_time = (hbp * lane_byte_clk_kHz) / pixel_clk_kHz; + tmp = (u64)htot * (u64)lane_byte_clk_kHz; + hline_time = DIV_ROUND_UP(tmp, pixel_clk_kHz); + + /* all specified in byte-lane clocks */ + writel(hsa_time, base + VID_HSA_TIME); + writel(hbp_time, base + VID_HBP_TIME); + writel(hline_time, base + VID_HLINE_TIME); + + writel(vsw, base + VID_VSA_LINES); + writel(vbp, base + VID_VBP_LINES); + writel(vfp, base + VID_VFP_LINES); + writel(mode->vdisplay, base + VID_VACTIVE_LINES); + writel(mode->hdisplay, base + VID_PKT_SIZE); + + DRM_DEBUG_DRIVER("htot=%d, hfp=%d, hbp=%d, hsw=%d\n", + htot, hfp, hbp, hsw); + DRM_DEBUG_DRIVER("vtol=%d, vfp=%d, vbp=%d, vsw=%d\n", + vtot, vfp, vbp, vsw); + DRM_DEBUG_DRIVER("hsa_time=%d, hbp_time=%d, hline_time=%d\n", + hsa_time, hbp_time, hline_time); +} + +static void dsi_set_video_mode_type(void __iomem *base, + unsigned long flags) +{ + u32 val; + u32 mode_mask = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + u32 non_burst_sync_pulse = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + u32 non_burst_sync_event = MIPI_DSI_MODE_VIDEO; + + /* + * choose video type + */ + if ((flags & mode_mask) == non_burst_sync_pulse) + val = DSI_NON_BURST_SYNC_PULSES; + else if ((flags & mode_mask) == non_burst_sync_event) + val = DSI_NON_BURST_SYNC_EVENTS; + else + val = DSI_BURST_SYNC_PULSES_1; + + writel(val, base + VID_MODE_CFG); +} + +static void dsi_mipi_init(struct dw_dsi *dsi) +{ + struct dsi_hw_ctx *ctx = dsi->ctx; + struct mipi_phy_params *phy = &dsi->phy; + struct drm_display_mode *mode = &dsi->cur_mode; + u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); + void __iomem *base = ctx->base; + u32 dphy_freq_kHz; + + /* count phy params */ + dphy_freq_kHz = mode->clock * bpp / dsi->lanes; + dsi_get_phy_params(dphy_freq_kHz, phy); + + /* reset Core */ + writel(0, base + PWR_UP); + + /* set phy params */ + dsi_set_mipi_phy(base, phy, dsi->lanes); + + /* set dsi mode */ + dsi_set_mode_timing(base, phy->lane_byte_clk_kHz, mode, dsi->format); + + /* set video mode type and lp */ + dsi_set_video_mode_type(base, dsi->mode_flags); + + /* dsi wake up */ + writel(DSI_VIDEO_MODE, base + MODE_CFG); + writel(BIT(0), base + LPCLK_CTRL); + writel(BIT(0), base + PWR_UP); + + DRM_DEBUG_DRIVER("lanes=%d, pixel_clk=%d kHz, bytes_freq=%d kHz\n", + dsi->lanes, mode->clock, phy->lane_byte_clk_kHz); +} + +static void dsi_encoder_disable(struct drm_encoder *encoder) +{ + struct dw_dsi *dsi = encoder_to_dsi(encoder); + struct dsi_hw_ctx *ctx = dsi->ctx; + void __iomem *base = ctx->base; + + if (!dsi->enable) + return; + + writel(0, base + PWR_UP); + writel(0, base + LPCLK_CTRL); + writel(0, base + PHY_RSTZ); + clk_disable_unprepare(ctx->pclk); + + dsi->enable = false; +} + +static void dsi_encoder_enable(struct drm_encoder *encoder) +{ + struct dw_dsi *dsi = encoder_to_dsi(encoder); + struct dsi_hw_ctx *ctx = dsi->ctx; + int ret; + + if (dsi->enable) + return; + + /* mipi dphy clock enable */ + ret = clk_prepare_enable(ctx->pclk); + if (ret) { + DRM_ERROR("fail to enable pclk: %d\n", ret); + return; + } + + dsi_mipi_init(dsi); + + dsi->enable = true; +} + +static void dsi_encoder_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adj_mode) +{ + struct dw_dsi *dsi = encoder_to_dsi(encoder); + + drm_mode_copy(&dsi->cur_mode, adj_mode); +} + +static int dsi_encoder_atomic_check(struct drm_encoder *encoder, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + /* do nothing */ + return 0; +} + +static const struct drm_encoder_helper_funcs dw_encoder_helper_funcs = { + .atomic_check = dsi_encoder_atomic_check, + .mode_set = dsi_encoder_mode_set, + .enable = dsi_encoder_enable, + .disable = dsi_encoder_disable +}; + +static const struct drm_encoder_funcs dw_encoder_funcs = { + .destroy = drm_encoder_cleanup, +}; + +static int dw_drm_encoder_init(struct device *dev, + struct drm_device *drm_dev, + struct drm_encoder *encoder) +{ + int ret; + u32 crtc_mask = drm_of_find_possible_crtcs(drm_dev, dev->of_node); + + if (!crtc_mask) { + DRM_ERROR("failed to find crtc mask\n"); + return -EINVAL; + } + + encoder->possible_crtcs = crtc_mask; + ret = drm_encoder_init(drm_dev, encoder, &dw_encoder_funcs, + DRM_MODE_ENCODER_DSI, NULL); + if (ret) { + DRM_ERROR("failed to init dsi encoder\n"); + return ret; + } + + drm_encoder_helper_add(encoder, &dw_encoder_helper_funcs); + + return 0; +} + +static int dsi_bind(struct device *dev, struct device *master, void *data) +{ + struct dsi_data *ddata = dev_get_drvdata(dev); + struct dw_dsi *dsi = &ddata->dsi; + struct drm_device *drm_dev = data; + int ret; + + ret = dw_drm_encoder_init(dev, drm_dev, &dsi->encoder); + if (ret) + return ret; + + return 0; +} + +static void dsi_unbind(struct device *dev, struct device *master, void *data) +{ + /* do nothing */ +} + +static const struct component_ops dsi_ops = { + .bind = dsi_bind, + .unbind = dsi_unbind, +}; + +static int dsi_parse_dt(struct platform_device *pdev, struct dw_dsi *dsi) +{ + struct dsi_hw_ctx *ctx = dsi->ctx; + struct resource *res; + + ctx->pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(ctx->pclk)) { + DRM_ERROR("failed to get pclk clock\n"); + return PTR_ERR(ctx->pclk); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ctx->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ctx->base)) { + DRM_ERROR("failed to remap dsi io region\n"); + return PTR_ERR(ctx->base); + } + + return 0; +} + +static int dsi_probe(struct platform_device *pdev) +{ + struct dsi_data *data; + struct dw_dsi *dsi; + struct dsi_hw_ctx *ctx; + int ret; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + DRM_ERROR("failed to allocate dsi data.\n"); + return -ENOMEM; + } + dsi = &data->dsi; + ctx = &data->ctx; + dsi->ctx = ctx; + + ret = dsi_parse_dt(pdev, dsi); + if (ret) + return ret; + + platform_set_drvdata(pdev, data); + + return component_add(&pdev->dev, &dsi_ops); +} + +static int dsi_remove(struct platform_device *pdev) +{ + component_del(&pdev->dev, &dsi_ops); + + return 0; +} + +static const struct of_device_id dsi_of_match[] = { + {.compatible = "hisilicon,hi6220-dsi"}, + { } +}; +MODULE_DEVICE_TABLE(of, dsi_of_match); + +static struct platform_driver dsi_driver = { + .probe = dsi_probe, + .remove = dsi_remove, + .driver = { + .name = "dw-dsi", + .of_match_table = dsi_of_match, + }, +}; + +module_platform_driver(dsi_driver); + +MODULE_AUTHOR("Xinliang Liu <xinliang.liu@linaro.org>"); +MODULE_AUTHOR("Xinliang Liu <z.liuxinliang@hisilicon.com>"); +MODULE_AUTHOR("Xinwei Kong <kong.kongxinwei@hisilicon.com>"); +MODULE_DESCRIPTION("DesignWare MIPI DSI Host Controller v1.02 driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h b/drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h new file mode 100644 index 000000000000..d3d44b7d2098 --- /dev/null +++ b/drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h @@ -0,0 +1,83 @@ +/* + * Copyright (c) 2016 Linaro Limited. + * Copyright (c) 2014-2016 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DW_DSI_REG_H__ +#define __DW_DSI_REG_H__ + +#define MASK(x) (BIT(x) - 1) + +/* + * regs + */ +#define PWR_UP 0x04 /* Core power-up */ +#define PHY_IF_CFG 0xA4 /* D-PHY interface configuration */ +#define CLKMGR_CFG 0x08 /* the internal clock dividers */ +#define PHY_RSTZ 0xA0 /* D-PHY reset control */ +#define PHY_TST_CTRL0 0xB4 /* D-PHY test interface control 0 */ +#define PHY_TST_CTRL1 0xB8 /* D-PHY test interface control 1 */ +#define DPI_VCID 0x0C /* DPI virtual channel id */ +#define DPI_COLOR_CODING 0x10 /* DPI color coding */ +#define DPI_CFG_POL 0x14 /* DPI polarity configuration */ +#define VID_HSA_TIME 0x48 /* Horizontal Sync Active time */ +#define VID_HBP_TIME 0x4C /* Horizontal Back Porch time */ +#define VID_HLINE_TIME 0x50 /* Line time */ +#define VID_VSA_LINES 0x54 /* Vertical Sync Active period */ +#define VID_VBP_LINES 0x58 /* Vertical Back Porch period */ +#define VID_VFP_LINES 0x5C /* Vertical Front Porch period */ +#define VID_VACTIVE_LINES 0x60 /* Vertical resolution */ +#define VID_PKT_SIZE 0x3C /* Video packet size */ +#define VID_MODE_CFG 0x38 /* Video mode configuration */ +#define DPI_LP_CMD_TIM 0x18 /* Low-power command timing config */ +#define PHY_TMR_CFG 0x9C /* Data lanes timing configuration */ +#define BTA_TO_CNT 0x8C /* Response timeout definition */ +#define PHY_TMR_LPCLK_CFG 0x98 /* clock lane timing configuration */ +#define CLK_DATA_TMR_CFG 0xCC +#define LPCLK_CTRL 0x94 /* Low-power in clock lane */ +#define PCKHDL_CFG 0x2C /* Packet handler configuration */ +#define EDPI_CMD_SIZE 0x64 /* Size for eDPI packets */ +#define MODE_CFG 0x34 /* Video or Command mode selection */ +#define PHY_STATUS 0xB0 /* D-PHY PPI status interface */ + +#define PHY_STOP_WAIT_TIME 0x30 + +/* + * regs relevant enum + */ +enum dpi_color_coding { + DSI_24BITS_1 = 5, +}; + +enum dsi_video_mode_type { + DSI_NON_BURST_SYNC_PULSES = 0, + DSI_NON_BURST_SYNC_EVENTS, + DSI_BURST_SYNC_PULSES_1, + DSI_BURST_SYNC_PULSES_2 +}; + +enum dsi_work_mode { + DSI_VIDEO_MODE = 0, + DSI_COMMAND_MODE +}; + +/* + * Register Write/Read Helper functions + */ +static inline void dw_update_bits(void __iomem *addr, u32 bit_start, + u32 mask, u32 val) +{ + u32 tmp, orig; + + orig = readl(addr); + tmp = orig & ~(mask << bit_start); + tmp |= (val & mask) << bit_start; + writel(tmp, addr); +} + +#endif /* __DW_DRM_DSI_H__ */ -- 2.7.1
next prev parent reply other threads:[~2016-02-26 8:40 UTC|newest] Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-02-26 8:40 [PATCH v6 00/11] Add DRM Driver for HiSilicon Kirin hi6220 SoC Xinliang Liu 2016-02-26 8:40 ` Xinliang Liu 2016-02-26 8:40 ` [PATCH v6 01/11] drm/hisilicon: Add device tree binding for hi6220 display subsystem Xinliang Liu 2016-02-26 8:40 ` Xinliang Liu 2016-03-02 18:29 ` Rob Herring 2016-03-02 18:29 ` Rob Herring 2016-03-03 1:28 ` Xinliang Liu 2016-03-03 1:28 ` Xinliang Liu 2016-02-26 8:40 ` [PATCH v6 02/11] drm/hisilicon: Add hisilicon kirin drm master driver Xinliang Liu 2016-02-26 8:40 ` Xinliang Liu 2016-02-26 8:54 ` Archit Taneja 2016-02-26 8:54 ` Archit Taneja 2016-02-26 9:14 ` Xinliang Liu 2016-02-26 9:14 ` Xinliang Liu 2016-02-26 8:40 ` [PATCH v6 03/11] drm/hisilicon: Add crtc driver for ADE Xinliang Liu 2016-02-26 8:40 ` Xinliang Liu 2016-02-29 18:48 ` Archit Taneja 2016-02-29 18:48 ` Archit Taneja 2016-03-01 9:20 ` Xinliang Liu 2016-03-01 9:20 ` Xinliang Liu 2016-02-26 8:40 ` [PATCH v6 04/11] drm/hisilicon: Add plane " Xinliang Liu 2016-02-26 8:40 ` Xinliang Liu 2016-02-29 18:48 ` Archit Taneja 2016-02-29 18:48 ` Archit Taneja [not found] ` <56D4926F.1090707-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> 2016-03-01 9:45 ` Xinliang Liu 2016-03-01 9:45 ` Xinliang Liu 2016-02-26 8:40 ` [PATCH v6 05/11] drm/hisilicon: Add vblank " Xinliang Liu 2016-02-26 8:40 ` Xinliang Liu 2016-02-29 18:48 ` Archit Taneja 2016-02-29 18:48 ` Archit Taneja 2016-03-01 10:14 ` Xinliang Liu 2016-03-01 10:14 ` Xinliang Liu 2016-03-01 12:40 ` Archit Taneja 2016-03-01 12:40 ` Archit Taneja 2016-03-03 7:52 ` Xinliang Liu 2016-03-03 7:52 ` Xinliang Liu 2016-02-26 8:40 ` [PATCH v6 06/11] drm/hisilicon: Add cma fbdev and hotplug Xinliang Liu 2016-02-26 8:40 ` Xinliang Liu [not found] ` <1456476028-36880-1-git-send-email-xinliang.liu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2016-02-26 8:40 ` Xinliang Liu [this message] 2016-02-26 8:40 ` [PATCH v6 07/11] drm/hisilicon: Add designware dsi encoder driver Xinliang Liu 2016-02-29 18:49 ` Archit Taneja 2016-02-29 18:49 ` Archit Taneja 2016-03-01 10:33 ` Xinliang Liu 2016-03-01 10:33 ` Xinliang Liu 2016-03-01 12:45 ` Archit Taneja 2016-03-01 12:45 ` Archit Taneja 2016-03-02 9:49 ` Xinliang Liu 2016-03-02 9:49 ` Xinliang Liu 2016-02-26 8:40 ` [PATCH v6 08/11] drm/hisilicon: Add designware dsi host driver Xinliang Liu 2016-02-26 8:40 ` Xinliang Liu 2016-02-29 18:51 ` Archit Taneja 2016-02-29 18:51 ` Archit Taneja 2016-03-01 10:34 ` Xinliang Liu 2016-03-01 10:34 ` Xinliang Liu 2016-02-26 8:40 ` [PATCH v6 09/11] drm/hisilicon: Add support for external bridge Xinliang Liu 2016-02-26 8:40 ` Xinliang Liu 2016-02-29 18:53 ` Archit Taneja 2016-02-29 18:53 ` Archit Taneja 2016-03-01 10:34 ` Xinliang Liu 2016-03-01 10:34 ` Xinliang Liu 2016-02-26 8:40 ` [PATCH v6 10/11] MAINTAINERS: Add maintainer for hisilicon DRM driver Xinliang Liu 2016-02-26 8:40 ` Xinliang Liu 2016-02-26 8:40 ` [PATCH v6 11/11] arm64: dts: hisilicon: Add display subsystem DT nodes for hi6220 Xinliang Liu 2016-02-26 8:40 ` Xinliang Liu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1456476028-36880-8-git-send-email-xinliang.liu@linaro.org \ --to=xinliang.liu-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \ --cc=airlied-cv59FeDIM0c@public.gmane.org \ --cc=andy.green-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \ --cc=architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \ --cc=benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \ --cc=bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \ --cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \ --cc=corbet-T1hC0tSOHrs@public.gmane.org \ --cc=daniel-/w4YWyX8dFk@public.gmane.org \ --cc=daniel-rLtY4a/8tF1rovVCs/uTlw@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \ --cc=emil.l.velikov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ --cc=guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \ --cc=haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \ --cc=kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \ --cc=liguozhu-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \ --cc=lijianhua-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \ --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \ --cc=puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \ --cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ --cc=sumit.semwal-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \ --cc=w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \ --cc=will.deacon-5wv7dgnIgG8@public.gmane.org \ --cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \ --cc=xuyiping-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \ --cc=zourongrong-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.