All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Hsu <KCHSU0@nuvoton.com>
To: broonie@kernel.org
Cc: alsa-devel@alsa-project.org, anatol.pomozov@gmail.com,
	YHCHuang@nuvoton.com, John Hsu <KCHSU0@nuvoton.com>,
	lgirdwood@gmail.com, benzh@chromium.org, CTLIN0@nuvoton.com,
	mhkuo@nuvoton.com, yong.zhi@intel.com
Subject: [PATCH] ASoC: nau8825: fix interrupt fails and unstable after resume
Date: Mon, 29 Feb 2016 03:01:45 +0800	[thread overview]
Message-ID: <1456686105-6885-1-git-send-email-KCHSU0@nuvoton.com> (raw)

This patch is to fix interrupt fails when resume back.
In solution, we add IRQ re-initiation,
and reconstruct suspend and resume with set_bias_level function.

Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
---
 sound/soc/codecs/nau8825.c | 42 ++++++++++++++++++++++++++++++++++++------
 1 file changed, 36 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c
index 504c969..2e2e11a 100644
--- a/sound/soc/codecs/nau8825.c
+++ b/sound/soc/codecs/nau8825.c
@@ -1092,6 +1092,36 @@ static int nau8825_set_sysclk(struct snd_soc_codec *codec, int clk_id,
 	return nau8825_configure_sysclk(nau8825, clk_id, freq);
 }
 
+static int nau8825_resume_setup(struct nau8825 *nau8825)
+{
+	struct regmap *regmap = nau8825->regmap;
+
+	/* IRQ Output Enable */
+	regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
+		NAU8825_IRQ_OUTPUT_EN, NAU8825_IRQ_OUTPUT_EN);
+
+	/* Enable internal VCO needed for interruptions */
+	nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0);
+
+	/* Enable DDACR needed for interrupts */
+	regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL,
+		NAU8825_ENABLE_DACR, NAU8825_ENABLE_DACR);
+
+	/* Chip needs one FSCLK cycle in order to generate interrupts,
+	 * as we cannot guarantee one will be provided by the system. Turning
+	 * master mode on then off enables us to generate that FSCLK cycle
+	 * with a minimum of contention on the clock bus.
+	 */
+	regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
+		NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER);
+	regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
+		NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
+
+	nau8825_restart_jack_detection(regmap);
+
+	return 0;
+}
+
 static int nau8825_set_bias_level(struct snd_soc_codec *codec,
 				   enum snd_soc_bias_level level)
 {
@@ -1121,6 +1151,8 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec,
 					"Failed to sync cache: %d\n", ret);
 				return ret;
 			}
+			if (nau8825->irq)
+				nau8825_resume_setup(nau8825);
 		}
 
 		break;
@@ -1330,24 +1362,22 @@ static int nau8825_i2c_remove(struct i2c_client *client)
 #ifdef CONFIG_PM_SLEEP
 static int nau8825_suspend(struct device *dev)
 {
-	struct i2c_client *client = to_i2c_client(dev);
 	struct nau8825 *nau8825 = dev_get_drvdata(dev);
+	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(nau8825->dapm);
 
-	disable_irq(client->irq);
+	disable_irq(nau8825->irq);
+	snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_OFF);
 	regcache_cache_only(nau8825->regmap, true);
-	regcache_mark_dirty(nau8825->regmap);
 
 	return 0;
 }
 
 static int nau8825_resume(struct device *dev)
 {
-	struct i2c_client *client = to_i2c_client(dev);
 	struct nau8825 *nau8825 = dev_get_drvdata(dev);
 
 	regcache_cache_only(nau8825->regmap, false);
-	regcache_sync(nau8825->regmap);
-	enable_irq(client->irq);
+	enable_irq(nau8825->irq);
 
 	return 0;
 }
-- 
2.6.4

             reply	other threads:[~2016-02-28 19:03 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-28 19:01 John Hsu [this message]
2016-02-28 19:47 ` [PATCH v2] ASoC: nau8825: reduce stanby power consumption John Hsu
2016-03-05  4:10   ` Mark Brown
2016-03-01  3:26 ` [PATCH] ASoC: nau8825: fix interrupt fails and unstable after resume Mark Brown
2016-03-10  6:12   ` John Hsu
2016-03-15  7:53     ` John Hsu
2016-03-15  9:27       ` Mark Brown
2016-03-15  9:27     ` Mark Brown
2016-03-16  3:45       ` John Hsu
  -- strict thread matches above, loose matches on Subject: below --
2016-03-22  3:57 John Hsu
2016-03-26  0:08 ` Ben Zhang
2016-03-30  9:35   ` John Hsu
2016-01-12  1:09 John Hsu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456686105-6885-1-git-send-email-KCHSU0@nuvoton.com \
    --to=kchsu0@nuvoton.com \
    --cc=CTLIN0@nuvoton.com \
    --cc=YHCHuang@nuvoton.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=anatol.pomozov@gmail.com \
    --cc=benzh@chromium.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=mhkuo@nuvoton.com \
    --cc=yong.zhi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.