From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms+renesas@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-pm@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v3 6/6] arm64: dts: r8a7795: Add SYSC PM domains
Date: Wed, 9 Mar 2016 20:18:55 +0100 [thread overview]
Message-ID: <1457551135-22078-7-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1457551135-22078-1-git-send-email-geert+renesas@glider.be>
Add a device node for the System Controller.
Hook up the Cortex-A57 CPU cores and the Cortex-A57 and Cortex A53 L2
caches/SCUs to their respective PM domains.
Hook up all devices that are part of the CPG/MSSR Clock Domain to the
SYSC "always-on" PM Domain.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v3:
- Drop power area hiearchy from DT,
- Switch to "#power-domain-cells = <1>",
- Use "<&sysc R8A7795_PD_ALWAYS_ON>" for devices in the always-on
power area,
- Drop fallback compatibility strings,
v2:
- New.
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 115 +++++++++++++++++--------------
1 file changed, 64 insertions(+), 51 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 4049182e66087b72..780b5bd37281a801 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7795-sysc.h>
/ {
compatible = "renesas,r8a7795";
@@ -39,6 +40,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
@@ -47,6 +49,7 @@
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x1>;
device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
@@ -54,6 +57,7 @@
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x2>;
device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA57_CPU2>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
@@ -61,6 +65,7 @@
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x3>;
device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA57_CPU3>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
@@ -68,12 +73,14 @@
L2_CA57: cache-controller@0 {
compatible = "cache";
+ power-domains = <&sysc R8A7795_PD_CA57_SCU>;
cache-unified;
cache-level = <2>;
};
L2_CA53: cache-controller@1 {
compatible = "cache";
+ power-domains = <&sysc R8A7795_PD_CA53_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -163,7 +170,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio1: gpio@e6051000 {
@@ -177,7 +184,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio2: gpio@e6052000 {
@@ -191,7 +198,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio3: gpio@e6053000 {
@@ -205,7 +212,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio4: gpio@e6054000 {
@@ -219,7 +226,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio5: gpio@e6055000 {
@@ -233,7 +240,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio6: gpio@e6055400 {
@@ -247,7 +254,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio7: gpio@e6055800 {
@@ -261,7 +268,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 905>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
pmu_a57 {
@@ -297,6 +304,12 @@
#power-domain-cells = <0>;
};
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7795-sysc";
+ reg = <0 0xe6180000 0 0x0400>;
+ #power-domain-cells = <1>;
+ };
+
audma0: dma-controller@ec700000 {
compatible = "renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
@@ -324,7 +337,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -356,7 +369,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 501>;
clock-names = "fck";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -378,7 +391,7 @@
GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
dmac0: dma-controller@e6700000 {
@@ -409,7 +422,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -442,7 +455,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -475,7 +488,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 217>;
clock-names = "fck";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -517,7 +530,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
phy-mode = "rgmii-id";
#address-cells = <1>;
#size-cells = <0>;
@@ -535,7 +548,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x31>, <&dmac1 0x30>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -551,7 +564,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x33>, <&dmac1 0x32>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -567,7 +580,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x35>, <&dmac1 0x34>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -583,7 +596,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x37>, <&dmac0 0x36>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -599,7 +612,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x38>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -614,7 +627,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x51>, <&dmac1 0x50>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -629,7 +642,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x53>, <&dmac1 0x52>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -644,7 +657,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x13>, <&dmac1 0x12>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -659,7 +672,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x57>, <&dmac0 0x56>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -674,7 +687,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x59>, <&dmac0 0x58>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -689,7 +702,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x5b>, <&dmac1 0x5a>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -700,7 +713,7 @@
reg = <0 0xe6500000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -712,7 +725,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -724,7 +737,7 @@
reg = <0 0xe6510000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -736,7 +749,7 @@
reg = <0 0xe66d0000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -748,7 +761,7 @@
reg = <0 0xe66d8000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -760,7 +773,7 @@
reg = <0 0xe66e0000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 919>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -772,7 +785,7 @@
reg = <0 0xe66e8000 0 0x40>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -822,7 +835,7 @@
"src.1", "src.0",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
rcar_sound,dvc {
@@ -956,7 +969,7 @@
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -965,7 +978,7 @@
reg = <0 0xee040000 0 0xc00>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 327>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -977,7 +990,7 @@
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -990,7 +1003,7 @@
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -1000,7 +1013,7 @@
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 314>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1009,7 +1022,7 @@
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 313>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1018,7 +1031,7 @@
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 312>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
cap-mmc-highspeed;
status = "disabled";
};
@@ -1028,7 +1041,7 @@
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 311>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
cap-mmc-highspeed;
status = "disabled";
};
@@ -1038,7 +1051,7 @@
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1047,7 +1060,7 @@
compatible = "renesas,usb2-phy-r8a7795";
reg = <0 0xee0a0200 0 0x700>;
clocks = <&cpg CPG_MOD 702>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1056,7 +1069,7 @@
compatible = "renesas,usb2-phy-r8a7795";
reg = <0 0xee0c0200 0 0x700>;
clocks = <&cpg CPG_MOD 701>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1068,7 +1081,7 @@
clocks = <&cpg CPG_MOD 703>;
phys = <&usb2_phy0>;
phy-names = "usb";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1079,7 +1092,7 @@
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1090,7 +1103,7 @@
clocks = <&cpg CPG_MOD 701>;
phys = <&usb2_phy2>;
phy-names = "usb";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1101,7 +1114,7 @@
clocks = <&cpg CPG_MOD 703>;
phys = <&usb2_phy0>;
phy-names = "usb";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1112,7 +1125,7 @@
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1123,7 +1136,7 @@
clocks = <&cpg CPG_MOD 701>;
phys = <&usb2_phy2>;
phy-names = "usb";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
};
--
1.9.1
next prev parent reply other threads:[~2016-03-09 19:18 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-09 19:18 [PATCH v3 0/6] ARM/arm64: dts: rcar: Add SYSC PM domains Geert Uytterhoeven
[not found] ` <1457551135-22078-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2016-03-09 19:18 ` [PATCH v3 1/6] ARM: dts: r8a7779: " Geert Uytterhoeven
2016-03-09 19:18 ` Geert Uytterhoeven
2016-03-09 19:18 ` [PATCH v3 2/6] ARM: dts: r8a7790: " Geert Uytterhoeven
2016-03-09 19:18 ` [PATCH v3 3/6] ARM: dts: r8a7791: " Geert Uytterhoeven
2016-03-09 19:18 ` [PATCH v3 4/6] ARM: dts: r8a7793: " Geert Uytterhoeven
2016-03-09 19:18 ` [PATCH v3 5/6] ARM: dts: r8a7794: " Geert Uytterhoeven
2016-03-09 19:18 ` Geert Uytterhoeven [this message]
2016-03-10 23:34 ` [PATCH v3 6/6] arm64: dts: r8a7795: " Simon Horman
2016-03-10 23:34 ` Simon Horman
2016-03-11 8:01 ` Geert Uytterhoeven
2016-03-11 8:01 ` Geert Uytterhoeven
2016-03-14 0:12 ` Simon Horman
2016-03-14 0:12 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457551135-22078-7-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=horms+renesas@verge.net.au \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.