From: Raja Mani <rmani@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, Raja Mani <rmani@qti.qualcomm.com>
Subject: [PATCH 2/3] ath10k: move cal data len to hw_params
Date: Thu, 10 Mar 2016 15:42:37 +0530 [thread overview]
Message-ID: <1457604758-14454-3-git-send-email-rmani@qti.qualcomm.com> (raw)
In-Reply-To: <1457604758-14454-1-git-send-email-rmani@qti.qualcomm.com>
ath10k_download_cal_dt() compares obtained cal data content length
against QCA988X_CAL_DATA_LEN (2116 bytes). It was written by keeping
qca988x in mind. In fact, cal data length is more chip specific.
To make ath10k_download_cal_dt() more generic and reusable for other
chipsets (like qca4019), cal data length is moved to hw_params.
Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 11 ++++++++++-
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/debug.c | 7 ++++---
drivers/net/wireless/ath/ath10k/hw.h | 2 --
4 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 4ec4d72..2a901c6 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -60,6 +60,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 2116,
.fw = {
.dir = QCA988X_HW_2_0_FW_DIR,
.fw = QCA988X_HW_2_0_FW_FILE,
@@ -78,6 +79,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
.fw = QCA6174_HW_2_1_FW_FILE,
@@ -97,6 +99,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
.fw = QCA6174_HW_2_1_FW_FILE,
@@ -116,6 +119,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_3_0_FW_DIR,
.fw = QCA6174_HW_3_0_FW_FILE,
@@ -135,6 +139,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 8124,
.fw = {
/* uses same binaries as hw3.0 */
.dir = QCA6174_HW_3_0_FW_DIR,
@@ -159,6 +164,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.tx_chain_mask = 0xf,
.rx_chain_mask = 0xf,
.max_spatial_stream = 4,
+ .cal_data_len = 12064,
.fw = {
.dir = QCA99X0_HW_2_0_FW_DIR,
.fw = QCA99X0_HW_2_0_FW_FILE,
@@ -177,6 +183,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
.fw = QCA9377_HW_1_0_FW_FILE,
@@ -195,6 +202,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
.fw = QCA9377_HW_1_0_FW_FILE,
@@ -218,6 +226,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.tx_chain_mask = 0x3,
.rx_chain_mask = 0x3,
.max_spatial_stream = 2,
+ .cal_data_len = 12064,
.fw = {
.dir = QCA4019_HW_1_0_FW_DIR,
.fw = QCA4019_HW_1_0_FW_FILE,
@@ -503,7 +512,7 @@ static int ath10k_download_cal_dt(struct ath10k *ar, const char *dt_name)
return -ENOENT;
}
- if (data_len != QCA988X_CAL_DATA_LEN) {
+ if (data_len != ar->hw_params.cal_data_len) {
ath10k_warn(ar, "invalid calibration data length in DT: %d\n",
data_len);
ret = -EMSGSIZE;
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 23ba03f..322a9eb 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -695,6 +695,7 @@ struct ath10k {
u32 tx_chain_mask;
u32 rx_chain_mask;
u32 max_spatial_stream;
+ u32 cal_data_len;
struct ath10k_hw_params_fw {
const char *dir;
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 076d29b..48f2835 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -1447,7 +1447,7 @@ static int ath10k_debug_cal_data_open(struct inode *inode, struct file *file)
goto err;
}
- buf = vmalloc(QCA988X_CAL_DATA_LEN);
+ buf = vmalloc(ar->hw_params.cal_data_len);
if (!buf) {
ret = -ENOMEM;
goto err;
@@ -1462,7 +1462,7 @@ static int ath10k_debug_cal_data_open(struct inode *inode, struct file *file)
}
ret = ath10k_hif_diag_read(ar, le32_to_cpu(addr), buf,
- QCA988X_CAL_DATA_LEN);
+ ar->hw_params.cal_data_len);
if (ret) {
ath10k_warn(ar, "failed to read calibration data: %d\n", ret);
goto err_vfree;
@@ -1487,10 +1487,11 @@ static ssize_t ath10k_debug_cal_data_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
+ struct ath10k *ar = file->private_data;
void *buf = file->private_data;
return simple_read_from_buffer(user_buf, count, ppos,
- buf, QCA988X_CAL_DATA_LEN);
+ buf, ar->hw_params.cal_data_len);
}
static int ath10k_debug_cal_data_release(struct inode *inode,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 1ff617b..c0179bc 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -134,8 +134,6 @@ enum qca9377_chip_id_rev {
#define REG_DUMP_COUNT_QCA988X 60
-#define QCA988X_CAL_DATA_LEN 2116
-
struct ath10k_fw_ie {
__le32 id;
__le32 len;
--
1.8.1.2
WARNING: multiple messages have this Message-ID (diff)
From: Raja Mani <rmani@qti.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Raja Mani <rmani@qti.qualcomm.com>
Subject: [PATCH 2/3] ath10k: move cal data len to hw_params
Date: Thu, 10 Mar 2016 15:42:37 +0530 [thread overview]
Message-ID: <1457604758-14454-3-git-send-email-rmani@qti.qualcomm.com> (raw)
In-Reply-To: <1457604758-14454-1-git-send-email-rmani@qti.qualcomm.com>
ath10k_download_cal_dt() compares obtained cal data content length
against QCA988X_CAL_DATA_LEN (2116 bytes). It was written by keeping
qca988x in mind. In fact, cal data length is more chip specific.
To make ath10k_download_cal_dt() more generic and reusable for other
chipsets (like qca4019), cal data length is moved to hw_params.
Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 11 ++++++++++-
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/debug.c | 7 ++++---
drivers/net/wireless/ath/ath10k/hw.h | 2 --
4 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 4ec4d72..2a901c6 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -60,6 +60,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 2116,
.fw = {
.dir = QCA988X_HW_2_0_FW_DIR,
.fw = QCA988X_HW_2_0_FW_FILE,
@@ -78,6 +79,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
.fw = QCA6174_HW_2_1_FW_FILE,
@@ -97,6 +99,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
.fw = QCA6174_HW_2_1_FW_FILE,
@@ -116,6 +119,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_3_0_FW_DIR,
.fw = QCA6174_HW_3_0_FW_FILE,
@@ -135,6 +139,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 8124,
.fw = {
/* uses same binaries as hw3.0 */
.dir = QCA6174_HW_3_0_FW_DIR,
@@ -159,6 +164,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.tx_chain_mask = 0xf,
.rx_chain_mask = 0xf,
.max_spatial_stream = 4,
+ .cal_data_len = 12064,
.fw = {
.dir = QCA99X0_HW_2_0_FW_DIR,
.fw = QCA99X0_HW_2_0_FW_FILE,
@@ -177,6 +183,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
.fw = QCA9377_HW_1_0_FW_FILE,
@@ -195,6 +202,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
.fw = QCA9377_HW_1_0_FW_FILE,
@@ -218,6 +226,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.tx_chain_mask = 0x3,
.rx_chain_mask = 0x3,
.max_spatial_stream = 2,
+ .cal_data_len = 12064,
.fw = {
.dir = QCA4019_HW_1_0_FW_DIR,
.fw = QCA4019_HW_1_0_FW_FILE,
@@ -503,7 +512,7 @@ static int ath10k_download_cal_dt(struct ath10k *ar, const char *dt_name)
return -ENOENT;
}
- if (data_len != QCA988X_CAL_DATA_LEN) {
+ if (data_len != ar->hw_params.cal_data_len) {
ath10k_warn(ar, "invalid calibration data length in DT: %d\n",
data_len);
ret = -EMSGSIZE;
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 23ba03f..322a9eb 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -695,6 +695,7 @@ struct ath10k {
u32 tx_chain_mask;
u32 rx_chain_mask;
u32 max_spatial_stream;
+ u32 cal_data_len;
struct ath10k_hw_params_fw {
const char *dir;
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 076d29b..48f2835 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -1447,7 +1447,7 @@ static int ath10k_debug_cal_data_open(struct inode *inode, struct file *file)
goto err;
}
- buf = vmalloc(QCA988X_CAL_DATA_LEN);
+ buf = vmalloc(ar->hw_params.cal_data_len);
if (!buf) {
ret = -ENOMEM;
goto err;
@@ -1462,7 +1462,7 @@ static int ath10k_debug_cal_data_open(struct inode *inode, struct file *file)
}
ret = ath10k_hif_diag_read(ar, le32_to_cpu(addr), buf,
- QCA988X_CAL_DATA_LEN);
+ ar->hw_params.cal_data_len);
if (ret) {
ath10k_warn(ar, "failed to read calibration data: %d\n", ret);
goto err_vfree;
@@ -1487,10 +1487,11 @@ static ssize_t ath10k_debug_cal_data_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
+ struct ath10k *ar = file->private_data;
void *buf = file->private_data;
return simple_read_from_buffer(user_buf, count, ppos,
- buf, QCA988X_CAL_DATA_LEN);
+ buf, ar->hw_params.cal_data_len);
}
static int ath10k_debug_cal_data_release(struct inode *inode,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 1ff617b..c0179bc 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -134,8 +134,6 @@ enum qca9377_chip_id_rev {
#define REG_DUMP_COUNT_QCA988X 60
-#define QCA988X_CAL_DATA_LEN 2116
-
struct ath10k_fw_ie {
__le32 id;
__le32 len;
--
1.8.1.2
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2016-03-10 10:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-10 10:12 [PATCH 0/3] ath10k: add calibration data download support for qca4019 Raja Mani
2016-03-10 10:12 ` Raja Mani
2016-03-10 10:12 ` [PATCH 1/3] ath10k: pass cal data location as an argument to ath10k_download_cal_{file|dt} Raja Mani
2016-03-10 10:12 ` Raja Mani
2016-03-10 10:12 ` Raja Mani [this message]
2016-03-10 10:12 ` [PATCH 2/3] ath10k: move cal data len to hw_params Raja Mani
2016-03-10 10:12 ` [PATCH 3/3] ath10k: incorporate qca4019 cal data download sequence Raja Mani
2016-03-10 10:12 ` Raja Mani
2016-03-23 12:08 ` [PATCH 0/3] ath10k: add calibration data download support for qca4019 Valo, Kalle
2016-03-23 12:08 ` Valo, Kalle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457604758-14454-3-git-send-email-rmani@qti.qualcomm.com \
--to=rmani@qti.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.