From: Wei Ni <wni@nvidia.com> To: rui.zhang@intel.com, edubezval@gmail.com, thierry.reding@gmail.com Cc: MLongnecker@nvidia.com, swarren@wwwdotorg.org, mikko.perttunen@kapsi.fi, linux-tegra@vger.kernel.org, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, Wei Ni <wni@nvidia.com> Subject: [PATCH V7 03/12] thermal: tegra: get rid of PDIV/HOTSPOT hack Date: Fri, 11 Mar 2016 11:09:14 +0800 [thread overview] Message-ID: <1457665763-29781-4-git-send-email-wni@nvidia.com> (raw) In-Reply-To: <1457665763-29781-1-git-send-email-wni@nvidia.com> Get rid of T124-specific PDIV/HOTSPOT hack. tegra-soctherm.c contained a hack to set the SENSOR_PDIV and SENSOR_HOTSPOT_OFFSET registers - it just did two writes of T124-specific opaque values. Convert these into a form that can be substituted on a per-chip basis, and into structure fields that have at least some independent meaning. Signed-off-by: Wei Ni <wni@nvidia.com> --- drivers/thermal/tegra/tegra-soctherm.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/thermal/tegra/tegra-soctherm.c b/drivers/thermal/tegra/tegra-soctherm.c index b3ec0faa2bee..b4b791ebfbb6 100644 --- a/drivers/thermal/tegra/tegra-soctherm.c +++ b/drivers/thermal/tegra/tegra-soctherm.c @@ -48,14 +48,12 @@ #define SENSOR_CONFIG2_THERMB_SHIFT 0 #define SENSOR_PDIV 0x1c0 -#define SENSOR_PDIV_T124 0x8888 #define SENSOR_PDIV_CPU_MASK (0xf << 12) #define SENSOR_PDIV_GPU_MASK (0xf << 8) #define SENSOR_PDIV_MEM_MASK (0xf << 4) #define SENSOR_PDIV_PLLX_MASK (0xf << 0) #define SENSOR_HOTSPOT_OFF 0x1c4 -#define SENSOR_HOTSPOT_OFF_T124 0x00060600 #define SENSOR_HOTSPOT_CPU_MASK (0xff << 16) #define SENSOR_HOTSPOT_GPU_MASK (0xff << 8) #define SENSOR_HOTSPOT_MEM_MASK (0xff << 0) @@ -436,6 +434,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev) struct resource *res; unsigned int i; int err; + u32 pdiv, hotspot; const struct tegra_tsensor *tsensors = t124_tsensors; const struct tegra_tsensor_group **ttgs = tegra124_tsensor_groups; @@ -493,8 +492,19 @@ static int tegra_soctherm_probe(struct platform_device *pdev) goto disable_clocks; } - writel(SENSOR_PDIV_T124, tegra->regs + SENSOR_PDIV); - writel(SENSOR_HOTSPOT_OFF_T124, tegra->regs + SENSOR_HOTSPOT_OFF); + /* Program pdiv and hotspot offsets per THERM */ + pdiv = readl(tegra->regs + SENSOR_PDIV); + hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF); + for (i = 0; i < TEGRA124_SOCTHERM_SENSOR_NUM; ++i) { + pdiv = REG_SET_MASK(pdiv, ttgs[i]->pdiv_mask, + ttgs[i]->pdiv); + if (ttgs[i]->id != TEGRA124_SOCTHERM_SENSOR_PLLX) + hotspot = REG_SET_MASK(hotspot, + ttgs[i]->pllx_hotspot_mask, + ttgs[i]->pllx_hotspot_diff); + } + writel(pdiv, tegra->regs + SENSOR_PDIV); + writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF); /* Initialize thermctl sensors */ -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Wei Ni <wni@nvidia.com> To: <rui.zhang@intel.com>, <edubezval@gmail.com>, <thierry.reding@gmail.com> Cc: <MLongnecker@nvidia.com>, <swarren@wwwdotorg.org>, <mikko.perttunen@kapsi.fi>, <linux-tegra@vger.kernel.org>, <linux-pm@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Wei Ni <wni@nvidia.com> Subject: [PATCH V7 03/12] thermal: tegra: get rid of PDIV/HOTSPOT hack Date: Fri, 11 Mar 2016 11:09:14 +0800 [thread overview] Message-ID: <1457665763-29781-4-git-send-email-wni@nvidia.com> (raw) In-Reply-To: <1457665763-29781-1-git-send-email-wni@nvidia.com> Get rid of T124-specific PDIV/HOTSPOT hack. tegra-soctherm.c contained a hack to set the SENSOR_PDIV and SENSOR_HOTSPOT_OFFSET registers - it just did two writes of T124-specific opaque values. Convert these into a form that can be substituted on a per-chip basis, and into structure fields that have at least some independent meaning. Signed-off-by: Wei Ni <wni@nvidia.com> --- drivers/thermal/tegra/tegra-soctherm.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/thermal/tegra/tegra-soctherm.c b/drivers/thermal/tegra/tegra-soctherm.c index b3ec0faa2bee..b4b791ebfbb6 100644 --- a/drivers/thermal/tegra/tegra-soctherm.c +++ b/drivers/thermal/tegra/tegra-soctherm.c @@ -48,14 +48,12 @@ #define SENSOR_CONFIG2_THERMB_SHIFT 0 #define SENSOR_PDIV 0x1c0 -#define SENSOR_PDIV_T124 0x8888 #define SENSOR_PDIV_CPU_MASK (0xf << 12) #define SENSOR_PDIV_GPU_MASK (0xf << 8) #define SENSOR_PDIV_MEM_MASK (0xf << 4) #define SENSOR_PDIV_PLLX_MASK (0xf << 0) #define SENSOR_HOTSPOT_OFF 0x1c4 -#define SENSOR_HOTSPOT_OFF_T124 0x00060600 #define SENSOR_HOTSPOT_CPU_MASK (0xff << 16) #define SENSOR_HOTSPOT_GPU_MASK (0xff << 8) #define SENSOR_HOTSPOT_MEM_MASK (0xff << 0) @@ -436,6 +434,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev) struct resource *res; unsigned int i; int err; + u32 pdiv, hotspot; const struct tegra_tsensor *tsensors = t124_tsensors; const struct tegra_tsensor_group **ttgs = tegra124_tsensor_groups; @@ -493,8 +492,19 @@ static int tegra_soctherm_probe(struct platform_device *pdev) goto disable_clocks; } - writel(SENSOR_PDIV_T124, tegra->regs + SENSOR_PDIV); - writel(SENSOR_HOTSPOT_OFF_T124, tegra->regs + SENSOR_HOTSPOT_OFF); + /* Program pdiv and hotspot offsets per THERM */ + pdiv = readl(tegra->regs + SENSOR_PDIV); + hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF); + for (i = 0; i < TEGRA124_SOCTHERM_SENSOR_NUM; ++i) { + pdiv = REG_SET_MASK(pdiv, ttgs[i]->pdiv_mask, + ttgs[i]->pdiv); + if (ttgs[i]->id != TEGRA124_SOCTHERM_SENSOR_PLLX) + hotspot = REG_SET_MASK(hotspot, + ttgs[i]->pllx_hotspot_mask, + ttgs[i]->pllx_hotspot_diff); + } + writel(pdiv, tegra->regs + SENSOR_PDIV); + writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF); /* Initialize thermctl sensors */ -- 1.9.1
next prev parent reply other threads:[~2016-03-11 3:09 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-03-11 3:09 [PATCH V7 00/12] Add T210 support in Tegra soctherm Wei Ni 2016-03-11 3:09 ` Wei Ni 2016-03-11 3:09 ` [PATCH V7 01/12] thermal: tegra: move tegra thermal files into tegra directory Wei Ni 2016-03-11 3:09 ` Wei Ni [not found] ` <1457665763-29781-2-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2016-03-14 18:37 ` Eduardo Valentin 2016-03-14 18:37 ` Eduardo Valentin [not found] ` <20160314183736.GA5378-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org> 2016-03-15 6:17 ` Wei Ni 2016-03-15 6:17 ` Wei Ni 2016-03-11 3:09 ` [PATCH V7 02/12] thermal: tegra: combine sensor group-related data Wei Ni 2016-03-11 3:09 ` Wei Ni 2016-03-11 3:09 ` Wei Ni [this message] 2016-03-11 3:09 ` [PATCH V7 03/12] thermal: tegra: get rid of PDIV/HOTSPOT hack Wei Ni 2016-03-14 20:05 ` Eduardo Valentin [not found] ` <20160314200539.GH1872-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org> 2016-03-15 6:21 ` Wei Ni 2016-03-15 6:21 ` Wei Ni [not found] ` <56E7AA01.4000305-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2016-03-15 19:56 ` Eduardo Valentin 2016-03-15 19:56 ` Eduardo Valentin 2016-03-16 3:48 ` Wei Ni 2016-03-16 3:48 ` Wei Ni [not found] ` <1457665763-29781-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2016-03-11 3:09 ` [PATCH V7 04/12] thermal: tegra: split tegra_soctherm driver Wei Ni 2016-03-11 3:09 ` Wei Ni 2016-03-14 21:01 ` [PATCH V7 00/12] Add T210 support in Tegra soctherm Eduardo Valentin 2016-03-14 21:01 ` Eduardo Valentin [not found] ` <20160314210152.GA4717-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org> 2016-03-15 5:46 ` Wei Ni 2016-03-15 5:46 ` Wei Ni
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1457665763-29781-4-git-send-email-wni@nvidia.com \ --to=wni@nvidia.com \ --cc=MLongnecker@nvidia.com \ --cc=edubezval@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-tegra@vger.kernel.org \ --cc=mikko.perttunen@kapsi.fi \ --cc=rui.zhang@intel.com \ --cc=swarren@wwwdotorg.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.