All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Christoffer Dall <christoffer.dall@linaro.org>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Eric Auger <eric.auger@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org
Subject: [PATCH v4 09/12] KVM: arm64: sync LPI configuration and pending tables
Date: Sat, 26 Mar 2016 02:14:07 +0000	[thread overview]
Message-ID: <1458958450-19662-10-git-send-email-andre.przywara@arm.com> (raw)
In-Reply-To: <1458958450-19662-1-git-send-email-andre.przywara@arm.com>

The LPI configuration and pending tables of the GICv3 LPIs are held
in tables in (guest) memory. To achieve reasonable performance, we
cache this data in our own data structures, so we need to sync those
two views from time to time. This behaviour is well described in the
GICv3 spec and is also exercised by hardware, so the sync points are
well known.

Provide functions that read the guest memory and store the
information from the configuration and pending tables in the kernel.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 include/kvm/vgic/vgic.h      |   2 +
 virt/kvm/arm/vgic/its-emul.c | 135 +++++++++++++++++++++++++++++++++++++++++++
 virt/kvm/arm/vgic/vgic.h     |   1 +
 3 files changed, 138 insertions(+)

diff --git a/include/kvm/vgic/vgic.h b/include/kvm/vgic/vgic.h
index ecf3260..ea98133 100644
--- a/include/kvm/vgic/vgic.h
+++ b/include/kvm/vgic/vgic.h
@@ -121,6 +121,8 @@ struct vgic_its {
 	int			cwriter;
 	struct list_head	device_list;
 	struct list_head	collection_list;
+	/* memory used for buffering guest's memory */
+	void			*buffer_page;
 };
 
 struct vgic_dist {
diff --git a/virt/kvm/arm/vgic/its-emul.c b/virt/kvm/arm/vgic/its-emul.c
index 1188e9a..d82ba9b 100644
--- a/virt/kvm/arm/vgic/its-emul.c
+++ b/virt/kvm/arm/vgic/its-emul.c
@@ -78,8 +78,130 @@ static struct its_itte *find_itte_by_lpi(struct kvm *kvm, int lpi)
 	return NULL;
 }
 
+#define LPI_PROP_ENABLE_BIT(p)	((p) & LPI_PROP_ENABLED)
+#define LPI_PROP_PRIORITY(p)	((p) & 0xfc)
+
+/* stores the priority and enable bit for a given LPI */
+static void update_lpi_config(struct kvm *kvm, struct its_itte *itte, u8 prop)
+{
+	spin_lock(&itte->irq.irq_lock);
+	itte->irq.priority = LPI_PROP_PRIORITY(prop);
+	itte->irq.enabled = LPI_PROP_ENABLE_BIT(prop);
+
+	vgic_queue_irq(kvm, &itte->irq);
+}
+
+#define GIC_LPI_OFFSET 8192
+
+/* We scan the table in chunks the size of the smallest page size */
+#define CHUNK_SIZE 4096U
+
 #define BASER_BASE_ADDRESS(x) ((x) & 0xfffffffff000ULL)
 
+static int nr_idbits_propbase(u64 propbaser)
+{
+	int nr_idbits = (1U << (propbaser & 0x1f)) + 1;
+
+	return max(nr_idbits, INTERRUPT_ID_BITS_ITS);
+}
+
+/*
+ * Scan the whole LPI configuration table and put the LPI configuration
+ * data in our own data structures. This relies on the LPI being
+ * mapped before.
+ */
+static bool its_update_lpis_configuration(struct kvm *kvm, u64 prop_base_reg)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	u8 *prop = dist->its.buffer_page;
+	u32 tsize;
+	gpa_t propbase;
+	int lpi = GIC_LPI_OFFSET;
+	struct its_itte *itte;
+	struct its_device *device;
+	int ret;
+
+	propbase = BASER_BASE_ADDRESS(prop_base_reg);
+	tsize = nr_idbits_propbase(prop_base_reg);
+
+	while (tsize > 0) {
+		int chunksize = min(tsize, CHUNK_SIZE);
+
+		ret = kvm_read_guest(kvm, propbase, prop, chunksize);
+		if (ret)
+			return false;
+
+		spin_lock(&dist->its.lock);
+		/*
+		 * Updating the status for all allocated LPIs. We catch
+		 * those LPIs that get disabled. We really don't care
+		 * about unmapped LPIs, as they need to be updated
+		 * later manually anyway once they get mapped.
+		 */
+		for_each_lpi(device, itte, kvm) {
+			if (itte->lpi < lpi || itte->lpi >= lpi + chunksize)
+				continue;
+
+			update_lpi_config(kvm, itte, prop[itte->lpi - lpi]);
+		}
+		spin_unlock(&dist->its.lock);
+		tsize -= chunksize;
+		lpi += chunksize;
+		propbase += chunksize;
+	}
+
+	return true;
+}
+
+/*
+ * Scan the whole LPI pending table and sync the pending bit in there
+ * with our own data structures. This relies on the LPI being
+ * mapped before.
+ */
+static bool its_sync_lpi_pending_table(struct kvm_vcpu *vcpu, u64 base_addr_reg)
+{
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+	unsigned long *pendmask = dist->its.buffer_page;
+	u32 nr_lpis = 1U << INTERRUPT_ID_BITS_ITS;
+	gpa_t pendbase;
+	int lpi = 0;
+	struct its_itte *itte;
+	struct its_device *device;
+	int ret;
+	int lpi_bit, nr_bits;
+
+	pendbase = BASER_BASE_ADDRESS(base_addr_reg);
+
+	while (nr_lpis > 0) {
+		nr_bits = min(nr_lpis, CHUNK_SIZE * 8);
+
+		ret = kvm_read_guest(vcpu->kvm, pendbase, pendmask,
+				     nr_bits / 8);
+		if (ret)
+			return false;
+
+		spin_lock(&dist->its.lock);
+		for_each_lpi(device, itte, vcpu->kvm) {
+			lpi_bit = itte->lpi - lpi;
+			if (lpi_bit < 0 || lpi_bit >= nr_bits)
+				continue;
+
+			if (!test_bit(lpi_bit, pendmask))
+				continue;
+
+			spin_lock(&itte->irq.irq_lock);
+			itte->irq.pending = true;
+			vgic_queue_irq(vcpu->kvm, &itte->irq);
+		}
+		spin_unlock(&dist->its.lock);
+		nr_lpis -= nr_bits;
+		lpi += nr_bits;
+		pendbase += nr_bits / 8;
+	}
+
+	return true;
+}
+
 static int vgic_mmio_read_its_ctlr(struct kvm_vcpu *vcpu,
 				   struct kvm_io_device *this,
 				   gpa_t addr, int len, void *val)
@@ -357,6 +479,14 @@ struct vgic_register_region its_registers[] = {
 /* This is called on setting the LPI enable bit in the redistributor. */
 void vgic_enable_lpis(struct kvm_vcpu *vcpu)
 {
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+	u64 prop_base_reg, pend_base_reg;
+
+	pend_base_reg = dist->pendbaser[vcpu->vcpu_id];
+	prop_base_reg = dist->propbaser;
+
+	its_update_lpis_configuration(vcpu->kvm, prop_base_reg);
+	its_sync_lpi_pending_table(vcpu, pend_base_reg);
 }
 
 int vits_init(struct kvm *kvm)
@@ -371,6 +501,10 @@ int vits_init(struct kvm *kvm)
 	if (!dist->pendbaser)
 		return -ENOMEM;
 
+	its->buffer_page = kmalloc(CHUNK_SIZE, GFP_KERNEL);
+	if (!its->buffer_page)
+		return -ENOMEM;
+
 	spin_lock_init(&its->lock);
 
 	INIT_LIST_HEAD(&its->device_list);
@@ -430,6 +564,7 @@ void vits_destroy(struct kvm *kvm)
 		kfree(container_of(cur, struct its_collection, coll_list));
 	}
 
+	kfree(its->buffer_page);
 	kfree(dist->pendbaser);
 
 	its->enabled = false;
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index 160c511..a7218b0 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -23,6 +23,7 @@
 #define IS_VGIC_ADDR_UNDEF(_x)  ((_x) == VGIC_ADDR_UNDEF)
 
 #define INTERRUPT_ID_BITS_SPIS	10
+#define INTERRUPT_ID_BITS_ITS	16
 
 struct vgic_irq *vgic_get_irq(struct kvm *kvm, struct kvm_vcpu *vcpu,
 			      u32 intid);
-- 
2.7.3


WARNING: multiple messages have this Message-ID (diff)
From: andre.przywara@arm.com (Andre Przywara)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 09/12] KVM: arm64: sync LPI configuration and pending tables
Date: Sat, 26 Mar 2016 02:14:07 +0000	[thread overview]
Message-ID: <1458958450-19662-10-git-send-email-andre.przywara@arm.com> (raw)
In-Reply-To: <1458958450-19662-1-git-send-email-andre.przywara@arm.com>

The LPI configuration and pending tables of the GICv3 LPIs are held
in tables in (guest) memory. To achieve reasonable performance, we
cache this data in our own data structures, so we need to sync those
two views from time to time. This behaviour is well described in the
GICv3 spec and is also exercised by hardware, so the sync points are
well known.

Provide functions that read the guest memory and store the
information from the configuration and pending tables in the kernel.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 include/kvm/vgic/vgic.h      |   2 +
 virt/kvm/arm/vgic/its-emul.c | 135 +++++++++++++++++++++++++++++++++++++++++++
 virt/kvm/arm/vgic/vgic.h     |   1 +
 3 files changed, 138 insertions(+)

diff --git a/include/kvm/vgic/vgic.h b/include/kvm/vgic/vgic.h
index ecf3260..ea98133 100644
--- a/include/kvm/vgic/vgic.h
+++ b/include/kvm/vgic/vgic.h
@@ -121,6 +121,8 @@ struct vgic_its {
 	int			cwriter;
 	struct list_head	device_list;
 	struct list_head	collection_list;
+	/* memory used for buffering guest's memory */
+	void			*buffer_page;
 };
 
 struct vgic_dist {
diff --git a/virt/kvm/arm/vgic/its-emul.c b/virt/kvm/arm/vgic/its-emul.c
index 1188e9a..d82ba9b 100644
--- a/virt/kvm/arm/vgic/its-emul.c
+++ b/virt/kvm/arm/vgic/its-emul.c
@@ -78,8 +78,130 @@ static struct its_itte *find_itte_by_lpi(struct kvm *kvm, int lpi)
 	return NULL;
 }
 
+#define LPI_PROP_ENABLE_BIT(p)	((p) & LPI_PROP_ENABLED)
+#define LPI_PROP_PRIORITY(p)	((p) & 0xfc)
+
+/* stores the priority and enable bit for a given LPI */
+static void update_lpi_config(struct kvm *kvm, struct its_itte *itte, u8 prop)
+{
+	spin_lock(&itte->irq.irq_lock);
+	itte->irq.priority = LPI_PROP_PRIORITY(prop);
+	itte->irq.enabled = LPI_PROP_ENABLE_BIT(prop);
+
+	vgic_queue_irq(kvm, &itte->irq);
+}
+
+#define GIC_LPI_OFFSET 8192
+
+/* We scan the table in chunks the size of the smallest page size */
+#define CHUNK_SIZE 4096U
+
 #define BASER_BASE_ADDRESS(x) ((x) & 0xfffffffff000ULL)
 
+static int nr_idbits_propbase(u64 propbaser)
+{
+	int nr_idbits = (1U << (propbaser & 0x1f)) + 1;
+
+	return max(nr_idbits, INTERRUPT_ID_BITS_ITS);
+}
+
+/*
+ * Scan the whole LPI configuration table and put the LPI configuration
+ * data in our own data structures. This relies on the LPI being
+ * mapped before.
+ */
+static bool its_update_lpis_configuration(struct kvm *kvm, u64 prop_base_reg)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	u8 *prop = dist->its.buffer_page;
+	u32 tsize;
+	gpa_t propbase;
+	int lpi = GIC_LPI_OFFSET;
+	struct its_itte *itte;
+	struct its_device *device;
+	int ret;
+
+	propbase = BASER_BASE_ADDRESS(prop_base_reg);
+	tsize = nr_idbits_propbase(prop_base_reg);
+
+	while (tsize > 0) {
+		int chunksize = min(tsize, CHUNK_SIZE);
+
+		ret = kvm_read_guest(kvm, propbase, prop, chunksize);
+		if (ret)
+			return false;
+
+		spin_lock(&dist->its.lock);
+		/*
+		 * Updating the status for all allocated LPIs. We catch
+		 * those LPIs that get disabled. We really don't care
+		 * about unmapped LPIs, as they need to be updated
+		 * later manually anyway once they get mapped.
+		 */
+		for_each_lpi(device, itte, kvm) {
+			if (itte->lpi < lpi || itte->lpi >= lpi + chunksize)
+				continue;
+
+			update_lpi_config(kvm, itte, prop[itte->lpi - lpi]);
+		}
+		spin_unlock(&dist->its.lock);
+		tsize -= chunksize;
+		lpi += chunksize;
+		propbase += chunksize;
+	}
+
+	return true;
+}
+
+/*
+ * Scan the whole LPI pending table and sync the pending bit in there
+ * with our own data structures. This relies on the LPI being
+ * mapped before.
+ */
+static bool its_sync_lpi_pending_table(struct kvm_vcpu *vcpu, u64 base_addr_reg)
+{
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+	unsigned long *pendmask = dist->its.buffer_page;
+	u32 nr_lpis = 1U << INTERRUPT_ID_BITS_ITS;
+	gpa_t pendbase;
+	int lpi = 0;
+	struct its_itte *itte;
+	struct its_device *device;
+	int ret;
+	int lpi_bit, nr_bits;
+
+	pendbase = BASER_BASE_ADDRESS(base_addr_reg);
+
+	while (nr_lpis > 0) {
+		nr_bits = min(nr_lpis, CHUNK_SIZE * 8);
+
+		ret = kvm_read_guest(vcpu->kvm, pendbase, pendmask,
+				     nr_bits / 8);
+		if (ret)
+			return false;
+
+		spin_lock(&dist->its.lock);
+		for_each_lpi(device, itte, vcpu->kvm) {
+			lpi_bit = itte->lpi - lpi;
+			if (lpi_bit < 0 || lpi_bit >= nr_bits)
+				continue;
+
+			if (!test_bit(lpi_bit, pendmask))
+				continue;
+
+			spin_lock(&itte->irq.irq_lock);
+			itte->irq.pending = true;
+			vgic_queue_irq(vcpu->kvm, &itte->irq);
+		}
+		spin_unlock(&dist->its.lock);
+		nr_lpis -= nr_bits;
+		lpi += nr_bits;
+		pendbase += nr_bits / 8;
+	}
+
+	return true;
+}
+
 static int vgic_mmio_read_its_ctlr(struct kvm_vcpu *vcpu,
 				   struct kvm_io_device *this,
 				   gpa_t addr, int len, void *val)
@@ -357,6 +479,14 @@ struct vgic_register_region its_registers[] = {
 /* This is called on setting the LPI enable bit in the redistributor. */
 void vgic_enable_lpis(struct kvm_vcpu *vcpu)
 {
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+	u64 prop_base_reg, pend_base_reg;
+
+	pend_base_reg = dist->pendbaser[vcpu->vcpu_id];
+	prop_base_reg = dist->propbaser;
+
+	its_update_lpis_configuration(vcpu->kvm, prop_base_reg);
+	its_sync_lpi_pending_table(vcpu, pend_base_reg);
 }
 
 int vits_init(struct kvm *kvm)
@@ -371,6 +501,10 @@ int vits_init(struct kvm *kvm)
 	if (!dist->pendbaser)
 		return -ENOMEM;
 
+	its->buffer_page = kmalloc(CHUNK_SIZE, GFP_KERNEL);
+	if (!its->buffer_page)
+		return -ENOMEM;
+
 	spin_lock_init(&its->lock);
 
 	INIT_LIST_HEAD(&its->device_list);
@@ -430,6 +564,7 @@ void vits_destroy(struct kvm *kvm)
 		kfree(container_of(cur, struct its_collection, coll_list));
 	}
 
+	kfree(its->buffer_page);
 	kfree(dist->pendbaser);
 
 	its->enabled = false;
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index 160c511..a7218b0 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -23,6 +23,7 @@
 #define IS_VGIC_ADDR_UNDEF(_x)  ((_x) == VGIC_ADDR_UNDEF)
 
 #define INTERRUPT_ID_BITS_SPIS	10
+#define INTERRUPT_ID_BITS_ITS	16
 
 struct vgic_irq *vgic_get_irq(struct kvm *kvm, struct kvm_vcpu *vcpu,
 			      u32 intid);
-- 
2.7.3

  parent reply	other threads:[~2016-03-26  2:14 UTC|newest]

Thread overview: 120+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-26  2:13 [PATCH v4 00/12] KVM: arm64: GICv3 ITS emulation Andre Przywara
2016-03-26  2:13 ` Andre Przywara
2016-03-26  2:13 ` [PATCH v4 01/12] KVM: extend struct kvm_msi to hold a 32-bit device ID Andre Przywara
2016-03-26  2:13   ` Andre Przywara
2016-04-03  9:15   ` Christoffer Dall
2016-04-03  9:15     ` Christoffer Dall
2016-05-25 15:55     ` Andre Przywara
2016-05-25 15:55       ` Andre Przywara
2016-05-25 16:16       ` Marc Zyngier
2016-05-25 16:16         ` Marc Zyngier
2016-05-31 13:05         ` Christoffer Dall
2016-05-31 13:05           ` Christoffer Dall
2016-05-05 17:55   ` Chalamarla, Tirumalesh
2016-05-05 17:55     ` Chalamarla, Tirumalesh
2016-03-26  2:14 ` [PATCH v4 02/12] KVM: arm/arm64: extend arch CAP checks to allow per-VM capabilities Andre Przywara
2016-03-26  2:14   ` Andre Przywara
2016-04-03 10:08   ` Christoffer Dall
2016-04-03 10:08     ` Christoffer Dall
2016-04-05 12:48   ` Eric Auger
2016-04-05 12:48     ` Eric Auger
2016-05-05 18:00   ` Chalamarla, Tirumalesh
2016-05-05 18:00     ` Chalamarla, Tirumalesh
2016-03-26  2:14 ` [PATCH v4 03/12] KVM: arm64: Introduce new MMIO region for the ITS base address Andre Przywara
2016-03-26  2:14   ` Andre Przywara
2016-04-03 10:08   ` Christoffer Dall
2016-04-03 10:08     ` Christoffer Dall
2016-04-05 12:47     ` Eric Auger
2016-04-05 12:47       ` Eric Auger
2016-04-07 13:44   ` Marc Zyngier
2016-04-07 13:44     ` Marc Zyngier
2016-05-05 18:08   ` Chalamarla, Tirumalesh
2016-05-05 18:08     ` Chalamarla, Tirumalesh
2016-05-09 15:47     ` Marc Zyngier
2016-05-09 15:47       ` Marc Zyngier
2016-05-09 16:53       ` Chalamarla, Tirumalesh
2016-05-09 16:53         ` Chalamarla, Tirumalesh
2016-05-09 17:09         ` Marc Zyngier
2016-05-09 17:09           ` Marc Zyngier
2016-03-26  2:14 ` [PATCH v4 04/12] KVM: arm64: handle ITS related GICv3 redistributor registers Andre Przywara
2016-03-26  2:14   ` Andre Przywara
2016-04-03 10:08   ` Christoffer Dall
2016-04-03 10:08     ` Christoffer Dall
2016-04-05 12:55     ` Eric Auger
2016-04-05 12:55       ` Eric Auger
2016-04-05 15:17   ` Eric Auger
2016-04-05 15:17     ` Eric Auger
2016-04-07 13:54   ` Marc Zyngier
2016-04-07 13:54     ` Marc Zyngier
2016-04-07 13:58     ` Marc Zyngier
2016-04-07 13:58       ` Marc Zyngier
2016-05-05 18:06       ` Chalamarla, Tirumalesh
2016-05-05 18:06         ` Chalamarla, Tirumalesh
2016-03-26  2:14 ` [PATCH v4 05/12] KVM: arm64: introduce ITS emulation file with stub functions Andre Przywara
2016-03-26  2:14   ` Andre Przywara
2016-04-05 16:03   ` Eric Auger
2016-04-05 16:03     ` Eric Auger
2016-04-07 14:04   ` Marc Zyngier
2016-04-07 14:04     ` Marc Zyngier
2016-04-07 14:08     ` Eric Auger
2016-04-07 14:08       ` Eric Auger
2016-04-07 14:48       ` Marc Zyngier
2016-04-07 14:48         ` Marc Zyngier
2016-04-07 15:09         ` Eric Auger
2016-04-07 15:09           ` Eric Auger
2016-04-07 15:19           ` Marc Zyngier
2016-04-07 15:19             ` Marc Zyngier
2016-03-26  2:14 ` [PATCH v4 06/12] KVM: arm64: implement basic ITS register handlers Andre Przywara
2016-03-26  2:14   ` Andre Przywara
2016-04-03 10:08   ` Christoffer Dall
2016-04-03 10:08     ` Christoffer Dall
2016-04-06  9:36   ` Eric Auger
2016-04-06  9:36     ` Eric Auger
2016-05-25 13:49     ` Andre Przywara
2016-05-25 13:49       ` Andre Przywara
2016-04-07 14:35   ` Marc Zyngier
2016-04-07 14:35     ` Marc Zyngier
2016-05-25 11:37     ` Andre Przywara
2016-05-25 11:37       ` Andre Przywara
2016-05-26  9:10       ` Marc Zyngier
2016-05-26  9:10         ` Marc Zyngier
2016-06-03 15:42         ` Andre Przywara
2016-06-03 15:42           ` Andre Przywara
2016-06-03 16:54           ` Marc Zyngier
2016-06-03 16:54             ` Marc Zyngier
2016-05-05 18:51   ` Chalamarla, Tirumalesh
2016-05-05 18:51     ` Chalamarla, Tirumalesh
2016-03-26  2:14 ` [PATCH v4 07/12] KVM: arm64: add data structures to model ITS interrupt translation Andre Przywara
2016-03-26  2:14   ` Andre Przywara
2016-04-06  9:53   ` Eric Auger
2016-04-06  9:53     ` Eric Auger
2016-03-26  2:14 ` [PATCH v4 08/12] KVM: arm64: connect LPIs to the VGIC emulation Andre Przywara
2016-03-26  2:14   ` Andre Przywara
2016-04-06 12:00   ` Eric Auger
2016-04-06 12:00     ` Eric Auger
2016-05-05 18:59   ` Chalamarla, Tirumalesh
2016-05-05 18:59     ` Chalamarla, Tirumalesh
2016-03-26  2:14 ` Andre Przywara [this message]
2016-03-26  2:14   ` [PATCH v4 09/12] KVM: arm64: sync LPI configuration and pending tables Andre Przywara
2016-04-06 13:41   ` Eric Auger
2016-04-06 13:41     ` Eric Auger
2016-06-03 14:17     ` Andre Przywara
2016-06-03 14:17       ` Andre Przywara
2016-03-26  2:14 ` [PATCH v4 10/12] KVM: arm64: implement ITS command queue command handlers Andre Przywara
2016-03-26  2:14   ` Andre Przywara
2016-05-05 19:12   ` Chalamarla, Tirumalesh
2016-05-05 19:12     ` Chalamarla, Tirumalesh
2016-05-25 14:34     ` Andre Przywara
2016-05-25 14:34       ` Andre Przywara
2016-03-26  2:14 ` [PATCH v4 11/12] KVM: arm64: implement MSI injection in ITS emulation Andre Przywara
2016-03-26  2:14   ` Andre Przywara
2016-03-26  2:14 ` [PATCH v4 12/12] KVM: arm64: enable ITS emulation as a virtual MSI controller Andre Przywara
2016-03-26  2:14   ` Andre Przywara
2016-06-03  4:26 ` [PATCH v4 00/12] KVM: arm64: GICv3 ITS emulation Bharat Bhushan
2016-06-03  4:26   ` Bharat Bhushan
2016-06-03 14:32   ` Andre Przywara
2016-06-03 14:32     ` Andre Przywara
2016-06-06  5:29     ` Bharat Bhushan
2016-06-06  5:29       ` Bharat Bhushan
2016-06-07  8:02       ` Christoffer Dall
2016-06-07  8:02         ` Christoffer Dall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1458958450-19662-10-git-send-email-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=christoffer.dall@linaro.org \
    --cc=eric.auger@linaro.org \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.