All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Horman <horms+renesas@verge.net.au>
To: linux-fbdev@vger.kernel.org
Subject: [PATCH v2] fbdev: sh_mipi_dsi: remove driver
Date: Mon, 04 Apr 2016 01:48:04 +0000	[thread overview]
Message-ID: <1459734484-6815-1-git-send-email-horms+renesas@verge.net.au> (raw)

Remove the sh_mipi_dsi driver as it appears to be unused since
c0bb9b302769 ("ARCH: ARM: shmobile: Remove ag5evm board support").

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Based on v4.6-rc1

v2
* Update patch referred to in changelog
---
 drivers/video/Kconfig             |   4 -
 drivers/video/fbdev/Kconfig       |   1 -
 drivers/video/fbdev/Makefile      |   1 -
 drivers/video/fbdev/sh_mipi_dsi.c | 587 --------------------------------------
 include/video/sh_mipi_dsi.h       |  59 ----
 5 files changed, 652 deletions(-)
 delete mode 100644 drivers/video/fbdev/sh_mipi_dsi.c
 delete mode 100644 include/video/sh_mipi_dsi.h

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e0606c01e8ac..3c20af999893 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -8,10 +8,6 @@ menu "Graphics support"
 config HAVE_FB_ATMEL
 	bool
 
-config SH_MIPI_DSI
-	tristate
-	depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
-
 config SH_LCD_MIPI_DSI
 	bool
 
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 983280e8d93f..7d991cb9e78e 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1993,7 +1993,6 @@ config FB_SH_MOBILE_LCDC
 	select FB_SYS_FOPS
 	select FB_DEFERRED_IO
 	select FB_BACKLIGHT
-	select SH_MIPI_DSI if SH_LCD_MIPI_DSI
 	---help---
 	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
 
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 65fb15075c8f..f6731867dd26 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -117,7 +117,6 @@ obj-$(CONFIG_FB_SM501)            += sm501fb.o
 obj-$(CONFIG_FB_UDL)		  += udlfb.o
 obj-$(CONFIG_FB_SMSCUFX)	  += smscufx.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
-obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
 obj-$(CONFIG_FB_SH_MOBILE_MERAM)  += sh_mobile_meram.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
diff --git a/drivers/video/fbdev/sh_mipi_dsi.c b/drivers/video/fbdev/sh_mipi_dsi.c
deleted file mode 100644
index 8f6e8ff620d4..000000000000
--- a/drivers/video/fbdev/sh_mipi_dsi.c
+++ /dev/null
@@ -1,587 +0,0 @@
-/*
- * Renesas SH-mobile MIPI DSI support
- *
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- */
-
-#include <linux/bitmap.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/module.h>
-
-#include <video/mipi_display.h>
-#include <video/sh_mipi_dsi.h>
-#include <video/sh_mobile_lcdc.h>
-
-#include "sh_mobile_lcdcfb.h"
-
-#define SYSCTRL		0x0000
-#define SYSCONF		0x0004
-#define TIMSET		0x0008
-#define RESREQSET0	0x0018
-#define RESREQSET1	0x001c
-#define HSTTOVSET	0x0020
-#define LPRTOVSET	0x0024
-#define TATOVSET	0x0028
-#define PRTOVSET	0x002c
-#define DSICTRL		0x0030
-#define DSIINTE		0x0060
-#define PHYCTRL		0x0070
-
-/* relative to linkbase */
-#define DTCTR		0x0000
-#define VMCTR1		0x0020
-#define VMCTR2		0x0024
-#define VMLEN1		0x0028
-#define VMLEN2		0x002c
-#define CMTSRTREQ	0x0070
-#define CMTSRTCTR	0x00d0
-
-/* E.g., sh7372 has 2 MIPI-DSIs - one for each LCDC */
-#define MAX_SH_MIPI_DSI 2
-
-struct sh_mipi {
-	struct sh_mobile_lcdc_entity entity;
-
-	void __iomem	*base;
-	void __iomem	*linkbase;
-	struct clk	*dsit_clk;
-	struct platform_device *pdev;
-};
-
-#define to_sh_mipi(e)	container_of(e, struct sh_mipi, entity)
-
-static struct sh_mipi *mipi_dsi[MAX_SH_MIPI_DSI];
-
-/* Protect the above array */
-static DEFINE_MUTEX(array_lock);
-
-static struct sh_mipi *sh_mipi_by_handle(int handle)
-{
-	if (handle >= ARRAY_SIZE(mipi_dsi) || handle < 0)
-		return NULL;
-
-	return mipi_dsi[handle];
-}
-
-static int sh_mipi_send_short(struct sh_mipi *mipi, u8 dsi_cmd,
-			      u8 cmd, u8 param)
-{
-	u32 data = (dsi_cmd << 24) | (cmd << 16) | (param << 8);
-	int cnt = 100;
-
-	/* transmit a short packet to LCD panel */
-	iowrite32(1 | data, mipi->linkbase + CMTSRTCTR);
-	iowrite32(1, mipi->linkbase + CMTSRTREQ);
-
-	while ((ioread32(mipi->linkbase + CMTSRTREQ) & 1) && --cnt)
-		udelay(1);
-
-	return cnt ? 0 : -ETIMEDOUT;
-}
-
-#define LCD_CHAN2MIPI(c) ((c) < LCDC_CHAN_MAINLCD || (c) > LCDC_CHAN_SUBLCD ? \
-				-EINVAL : (c) - 1)
-
-static int sh_mipi_dcs(int handle, u8 cmd)
-{
-	struct sh_mipi *mipi = sh_mipi_by_handle(LCD_CHAN2MIPI(handle));
-	if (!mipi)
-		return -ENODEV;
-	return sh_mipi_send_short(mipi, MIPI_DSI_DCS_SHORT_WRITE, cmd, 0);
-}
-
-static int sh_mipi_dcs_param(int handle, u8 cmd, u8 param)
-{
-	struct sh_mipi *mipi = sh_mipi_by_handle(LCD_CHAN2MIPI(handle));
-	if (!mipi)
-		return -ENODEV;
-	return sh_mipi_send_short(mipi, MIPI_DSI_DCS_SHORT_WRITE_PARAM, cmd,
-				  param);
-}
-
-static void sh_mipi_dsi_enable(struct sh_mipi *mipi, bool enable)
-{
-	/*
-	 * enable LCDC data tx, transition to LPS after completion of each HS
-	 * packet
-	 */
-	iowrite32(0x00000002 | enable, mipi->linkbase + DTCTR);
-}
-
-static void sh_mipi_shutdown(struct platform_device *pdev)
-{
-	struct sh_mipi *mipi = to_sh_mipi(platform_get_drvdata(pdev));
-
-	sh_mipi_dsi_enable(mipi, false);
-}
-
-static int sh_mipi_setup(struct sh_mipi *mipi, const struct fb_videomode *mode)
-{
-	void __iomem *base = mipi->base;
-	struct sh_mipi_dsi_info *pdata = mipi->pdev->dev.platform_data;
-	u32 pctype, datatype, pixfmt, linelength, vmctr2;
-	u32 tmp, top, bottom, delay, div;
-	int bpp;
-
-	/*
-	 * Select data format. MIPI DSI is not hot-pluggable, so, we just use
-	 * the default videomode. If this ever becomes a problem, We'll have to
-	 * move this to mipi_display_on() above and use info->var.xres
-	 */
-	switch (pdata->data_format) {
-	case MIPI_RGB888:
-		pctype = 0;
-		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
-		pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
-		linelength = mode->xres * 3;
-		break;
-	case MIPI_RGB565:
-		pctype = 1;
-		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
-		pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
-		linelength = mode->xres * 2;
-		break;
-	case MIPI_RGB666_LP:
-		pctype = 2;
-		datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
-		pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
-		linelength = mode->xres * 3;
-		break;
-	case MIPI_RGB666:
-		pctype = 3;
-		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
-		pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
-		linelength = (mode->xres * 18 + 7) / 8;
-		break;
-	case MIPI_BGR888:
-		pctype = 8;
-		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
-		pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
-		linelength = mode->xres * 3;
-		break;
-	case MIPI_BGR565:
-		pctype = 9;
-		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
-		pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
-		linelength = mode->xres * 2;
-		break;
-	case MIPI_BGR666_LP:
-		pctype = 0xa;
-		datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
-		pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
-		linelength = mode->xres * 3;
-		break;
-	case MIPI_BGR666:
-		pctype = 0xb;
-		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
-		pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
-		linelength = (mode->xres * 18 + 7) / 8;
-		break;
-	case MIPI_YUYV:
-		pctype = 4;
-		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
-		pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
-		linelength = mode->xres * 2;
-		break;
-	case MIPI_UYVY:
-		pctype = 5;
-		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
-		pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
-		linelength = mode->xres * 2;
-		break;
-	case MIPI_YUV420_L:
-		pctype = 6;
-		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
-		pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
-		linelength = (mode->xres * 12 + 7) / 8;
-		break;
-	case MIPI_YUV420:
-		pctype = 7;
-		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
-		pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
-		/* Length of U/V line */
-		linelength = (mode->xres + 1) / 2;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (!pdata->lane)
-		return -EINVAL;
-
-	/* reset DSI link */
-	iowrite32(0x00000001, base + SYSCTRL);
-	/* Hold reset for 100 cycles of the slowest of bus, HS byte and LP clock */
-	udelay(50);
-	iowrite32(0x00000000, base + SYSCTRL);
-
-	/* setup DSI link */
-
-	/*
-	 * T_wakeup = 0x7000
-	 * T_hs-trail = 3
-	 * T_hs-prepare = 3
-	 * T_clk-trail = 3
-	 * T_clk-prepare = 2
-	 */
-	iowrite32(0x70003332, base + TIMSET);
-	/* no responses requested */
-	iowrite32(0x00000000, base + RESREQSET0);
-	/* request response to packets of type 0x28 */
-	iowrite32(0x00000100, base + RESREQSET1);
-	/* High-speed transmission timeout, default 0xffffffff */
-	iowrite32(0x0fffffff, base + HSTTOVSET);
-	/* LP reception timeout, default 0xffffffff */
-	iowrite32(0x0fffffff, base + LPRTOVSET);
-	/* Turn-around timeout, default 0xffffffff */
-	iowrite32(0x0fffffff, base + TATOVSET);
-	/* Peripheral reset timeout, default 0xffffffff */
-	iowrite32(0x0fffffff, base + PRTOVSET);
-	/* Interrupts not used, disable all */
-	iowrite32(0, base + DSIINTE);
-	/* DSI-Tx bias on */
-	iowrite32(0x00000001, base + PHYCTRL);
-	udelay(200);
-	/* Deassert resets, power on */
-	iowrite32(0x03070001 | pdata->phyctrl, base + PHYCTRL);
-
-	/*
-	 * Default = ULPS enable |
-	 *	Contention detection enabled |
-	 *	EoT packet transmission enable |
-	 *	CRC check enable |
-	 *	ECC check enable
-	 */
-	bitmap_fill((unsigned long *)&tmp, pdata->lane);
-	tmp |= 0x00003700;
-	iowrite32(tmp, base + SYSCONF);
-
-	/* setup l-bridge */
-
-	/*
-	 * Enable transmission of all packets,
-	 * transmit LPS after each HS packet completion
-	 */
-	iowrite32(0x00000006, mipi->linkbase + DTCTR);
-	/* VSYNC width = 2 (<< 17) */
-	iowrite32((mode->vsync_len << pdata->vsynw_offset) |
-		  (pdata->clksrc << 16) | (pctype << 12) | datatype,
-		  mipi->linkbase + VMCTR1);
-
-	/*
-	 * Non-burst mode with sync pulses: VSE and HSE are output,
-	 * HSA period allowed, no commands in LP
-	 */
-	vmctr2 = 0;
-	if (pdata->flags & SH_MIPI_DSI_VSEE)
-		vmctr2 |= 1 << 23;
-	if (pdata->flags & SH_MIPI_DSI_HSEE)
-		vmctr2 |= 1 << 22;
-	if (pdata->flags & SH_MIPI_DSI_HSAE)
-		vmctr2 |= 1 << 21;
-	if (pdata->flags & SH_MIPI_DSI_BL2E)
-		vmctr2 |= 1 << 17;
-	if (pdata->flags & SH_MIPI_DSI_HSABM)
-		vmctr2 |= 1 << 5;
-	if (pdata->flags & SH_MIPI_DSI_HBPBM)
-		vmctr2 |= 1 << 4;
-	if (pdata->flags & SH_MIPI_DSI_HFPBM)
-		vmctr2 |= 1 << 3;
-	iowrite32(vmctr2, mipi->linkbase + VMCTR2);
-
-	/*
-	 * VMLEN1 = RGBLEN | HSALEN
-	 *
-	 * see
-	 *  Video mode - Blanking Packet setting
-	 */
-	top = linelength << 16; /* RGBLEN */
-	bottom = 0x00000001;
-	if (pdata->flags & SH_MIPI_DSI_HSABM) /* HSALEN */
-		bottom = (pdata->lane * mode->hsync_len) - 10;
-	iowrite32(top | bottom , mipi->linkbase + VMLEN1);
-
-	/*
-	 * VMLEN2 = HBPLEN | HFPLEN
-	 *
-	 * see
-	 *  Video mode - Blanking Packet setting
-	 */
-	top	= 0x00010000;
-	bottom	= 0x00000001;
-	delay	= 0;
-
-	div = 1;	/* HSbyteCLK is calculation base
-			 * HS4divCLK = HSbyteCLK/2
-			 * HS6divCLK is not supported for now */
-	if (pdata->flags & SH_MIPI_DSI_HS4divCLK)
-		div = 2;
-
-	if (pdata->flags & SH_MIPI_DSI_HFPBM) {	/* HBPLEN */
-		top = mode->hsync_len + mode->left_margin;
-		top = ((pdata->lane * top / div) - 10) << 16;
-	}
-	if (pdata->flags & SH_MIPI_DSI_HBPBM) { /* HFPLEN */
-		bottom = mode->right_margin;
-		bottom = (pdata->lane * bottom / div) - 12;
-	}
-
-	bpp = linelength / mode->xres; /* byte / pixel */
-	if ((pdata->lane / div) > bpp) {
-		tmp = mode->xres / bpp; /* output cycle */
-		tmp = mode->xres - tmp; /* (input - output) cycle */
-		delay = (pdata->lane * tmp);
-	}
-
-	iowrite32(top | (bottom + delay) , mipi->linkbase + VMLEN2);
-
-	msleep(5);
-
-	/* setup LCD panel */
-
-	/* cf. drivers/video/omap/lcd_mipid.c */
-	sh_mipi_dcs(pdata->channel, MIPI_DCS_EXIT_SLEEP_MODE);
-	msleep(120);
-	/*
-	 * [7] - Page Address Mode
-	 * [6] - Column Address Mode
-	 * [5] - Page / Column Address Mode
-	 * [4] - Display Device Line Refresh Order
-	 * [3] - RGB/BGR Order
-	 * [2] - Display Data Latch Data Order
-	 * [1] - Flip Horizontal
-	 * [0] - Flip Vertical
-	 */
-	sh_mipi_dcs_param(pdata->channel, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
-	/* cf. set_data_lines() */
-	sh_mipi_dcs_param(pdata->channel, MIPI_DCS_SET_PIXEL_FORMAT,
-			  pixfmt << 4);
-	sh_mipi_dcs(pdata->channel, MIPI_DCS_SET_DISPLAY_ON);
-
-	/* Enable timeout counters */
-	iowrite32(0x00000f00, base + DSICTRL);
-
-	return 0;
-}
-
-static int mipi_display_on(struct sh_mobile_lcdc_entity *entity)
-{
-	struct sh_mipi *mipi = to_sh_mipi(entity);
-	struct sh_mipi_dsi_info *pdata = mipi->pdev->dev.platform_data;
-	int ret;
-
-	pm_runtime_get_sync(&mipi->pdev->dev);
-
-	ret = pdata->set_dot_clock(mipi->pdev, mipi->base, 1);
-	if (ret < 0)
-		goto mipi_display_on_fail1;
-
-	ret = sh_mipi_setup(mipi, &entity->def_mode);
-	if (ret < 0)
-		goto mipi_display_on_fail2;
-
-	sh_mipi_dsi_enable(mipi, true);
-
-	return SH_MOBILE_LCDC_DISPLAY_CONNECTED;
-
-mipi_display_on_fail1:
-	pm_runtime_put_sync(&mipi->pdev->dev);
-mipi_display_on_fail2:
-	pdata->set_dot_clock(mipi->pdev, mipi->base, 0);
-
-	return ret;
-}
-
-static void mipi_display_off(struct sh_mobile_lcdc_entity *entity)
-{
-	struct sh_mipi *mipi = to_sh_mipi(entity);
-	struct sh_mipi_dsi_info *pdata = mipi->pdev->dev.platform_data;
-
-	sh_mipi_dsi_enable(mipi, false);
-
-	pdata->set_dot_clock(mipi->pdev, mipi->base, 0);
-
-	pm_runtime_put_sync(&mipi->pdev->dev);
-}
-
-static const struct sh_mobile_lcdc_entity_ops mipi_ops = {
-	.display_on = mipi_display_on,
-	.display_off = mipi_display_off,
-};
-
-static int __init sh_mipi_probe(struct platform_device *pdev)
-{
-	struct sh_mipi *mipi;
-	struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data;
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	struct resource *res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	unsigned long rate, f_current;
-	int idx = pdev->id, ret;
-
-	if (!res || !res2 || idx >= ARRAY_SIZE(mipi_dsi) || !pdata)
-		return -ENODEV;
-
-	if (!pdata->set_dot_clock)
-		return -EINVAL;
-
-	mutex_lock(&array_lock);
-	if (idx < 0)
-		for (idx = 0; idx < ARRAY_SIZE(mipi_dsi) && mipi_dsi[idx]; idx++)
-			;
-
-	if (idx = ARRAY_SIZE(mipi_dsi)) {
-		ret = -EBUSY;
-		goto efindslot;
-	}
-
-	mipi = kzalloc(sizeof(*mipi), GFP_KERNEL);
-	if (!mipi) {
-		ret = -ENOMEM;
-		goto ealloc;
-	}
-
-	mipi->entity.owner = THIS_MODULE;
-	mipi->entity.ops = &mipi_ops;
-
-	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
-		dev_err(&pdev->dev, "MIPI register region already claimed\n");
-		ret = -EBUSY;
-		goto ereqreg;
-	}
-
-	mipi->base = ioremap(res->start, resource_size(res));
-	if (!mipi->base) {
-		ret = -ENOMEM;
-		goto emap;
-	}
-
-	if (!request_mem_region(res2->start, resource_size(res2), pdev->name)) {
-		dev_err(&pdev->dev, "MIPI register region 2 already claimed\n");
-		ret = -EBUSY;
-		goto ereqreg2;
-	}
-
-	mipi->linkbase = ioremap(res2->start, resource_size(res2));
-	if (!mipi->linkbase) {
-		ret = -ENOMEM;
-		goto emap2;
-	}
-
-	mipi->pdev = pdev;
-
-	mipi->dsit_clk = clk_get(&pdev->dev, "dsit_clk");
-	if (IS_ERR(mipi->dsit_clk)) {
-		ret = PTR_ERR(mipi->dsit_clk);
-		goto eclktget;
-	}
-
-	f_current = clk_get_rate(mipi->dsit_clk);
-	/* 80MHz required by the datasheet */
-	rate = clk_round_rate(mipi->dsit_clk, 80000000);
-	if (rate > 0 && rate != f_current)
-		ret = clk_set_rate(mipi->dsit_clk, rate);
-	else
-		ret = rate;
-	if (ret < 0)
-		goto esettrate;
-
-	dev_dbg(&pdev->dev, "DSI-T clk %lu -> %lu\n", f_current, rate);
-
-	ret = clk_enable(mipi->dsit_clk);
-	if (ret < 0)
-		goto eclkton;
-
-	mipi_dsi[idx] = mipi;
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_resume(&pdev->dev);
-
-	mutex_unlock(&array_lock);
-	platform_set_drvdata(pdev, &mipi->entity);
-
-	return 0;
-
-eclkton:
-esettrate:
-	clk_put(mipi->dsit_clk);
-eclktget:
-	iounmap(mipi->linkbase);
-emap2:
-	release_mem_region(res2->start, resource_size(res2));
-ereqreg2:
-	iounmap(mipi->base);
-emap:
-	release_mem_region(res->start, resource_size(res));
-ereqreg:
-	kfree(mipi);
-ealloc:
-efindslot:
-	mutex_unlock(&array_lock);
-
-	return ret;
-}
-
-static int sh_mipi_remove(struct platform_device *pdev)
-{
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	struct resource *res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	struct sh_mipi *mipi = to_sh_mipi(platform_get_drvdata(pdev));
-	int i, ret;
-
-	mutex_lock(&array_lock);
-
-	for (i = 0; i < ARRAY_SIZE(mipi_dsi) && mipi_dsi[i] != mipi; i++)
-		;
-
-	if (i = ARRAY_SIZE(mipi_dsi)) {
-		ret = -EINVAL;
-	} else {
-		ret = 0;
-		mipi_dsi[i] = NULL;
-	}
-
-	mutex_unlock(&array_lock);
-
-	if (ret < 0)
-		return ret;
-
-	pm_runtime_disable(&pdev->dev);
-	clk_disable(mipi->dsit_clk);
-	clk_put(mipi->dsit_clk);
-
-	iounmap(mipi->linkbase);
-	if (res2)
-		release_mem_region(res2->start, resource_size(res2));
-	iounmap(mipi->base);
-	if (res)
-		release_mem_region(res->start, resource_size(res));
-	kfree(mipi);
-
-	return 0;
-}
-
-static struct platform_driver sh_mipi_driver = {
-	.remove		= sh_mipi_remove,
-	.shutdown	= sh_mipi_shutdown,
-	.driver = {
-		.name	= "sh-mipi-dsi",
-	},
-};
-
-module_platform_driver_probe(sh_mipi_driver, sh_mipi_probe);
-
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_DESCRIPTION("SuperH / ARM-shmobile MIPI DSI driver");
-MODULE_LICENSE("GPL v2");
diff --git a/include/video/sh_mipi_dsi.h b/include/video/sh_mipi_dsi.h
deleted file mode 100644
index a01f197e6ac1..000000000000
--- a/include/video/sh_mipi_dsi.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Public SH-mobile MIPI DSI header
- *
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef VIDEO_SH_MIPI_DSI_H
-#define VIDEO_SH_MIPI_DSI_H
-
-enum sh_mipi_dsi_data_fmt {
-	MIPI_RGB888,
-	MIPI_RGB565,
-	MIPI_RGB666_LP,
-	MIPI_RGB666,
-	MIPI_BGR888,
-	MIPI_BGR565,
-	MIPI_BGR666_LP,
-	MIPI_BGR666,
-	MIPI_YUYV,
-	MIPI_UYVY,
-	MIPI_YUV420_L,
-	MIPI_YUV420,
-};
-
-#define SH_MIPI_DSI_HSABM	(1 << 0)
-#define SH_MIPI_DSI_HBPBM	(1 << 1)
-#define SH_MIPI_DSI_HFPBM	(1 << 2)
-#define SH_MIPI_DSI_BL2E	(1 << 3)
-#define SH_MIPI_DSI_VSEE	(1 << 4)
-#define SH_MIPI_DSI_HSEE	(1 << 5)
-#define SH_MIPI_DSI_HSAE	(1 << 6)
-
-#define SH_MIPI_DSI_HSbyteCLK	(1 << 24)
-#define SH_MIPI_DSI_HS6divCLK	(1 << 25)
-#define SH_MIPI_DSI_HS4divCLK	(1 << 26)
-
-#define SH_MIPI_DSI_SYNC_PULSES_MODE	(SH_MIPI_DSI_VSEE | \
-					 SH_MIPI_DSI_HSEE | \
-					 SH_MIPI_DSI_HSAE)
-#define SH_MIPI_DSI_SYNC_EVENTS_MODE	(0)
-#define SH_MIPI_DSI_SYNC_BURST_MODE	(SH_MIPI_DSI_BL2E)
-
-struct sh_mipi_dsi_info {
-	enum sh_mipi_dsi_data_fmt	data_format;
-	int				channel;
-	int				lane;
-	unsigned long			flags;
-	u32				clksrc;
-	u32				phyctrl; /* for extra setting */
-	unsigned int			vsynw_offset;
-	int	(*set_dot_clock)(struct platform_device *pdev,
-				 void __iomem *base,
-				 int enable);
-};
-
-#endif
-- 
2.1.4


             reply	other threads:[~2016-04-04  1:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-04  1:48 Simon Horman [this message]
2016-05-10  8:54 ` [PATCH v2] fbdev: sh_mipi_dsi: remove driver Tomi Valkeinen
2016-05-10  8:54   ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1459734484-6815-1-git-send-email-horms+renesas@verge.net.au \
    --to=horms+renesas@verge.net.au \
    --cc=linux-fbdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.