All of lore.kernel.org
 help / color / mirror / Atom feed
From: Inki Dae <inki.dae@samsung.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Subject: [PATCH 1/3] drm/exynos: clean up wait_for_vblank
Date: Tue, 05 Apr 2016 17:27:42 +0900	[thread overview]
Message-ID: <1459844864-12065-2-git-send-email-inki.dae@samsung.com> (raw)
In-Reply-To: <1459844864-12065-1-git-send-email-inki.dae@samsung.com>

This patch cleans up wait_for_vblank relevant codes.
wait_for_vblank callback isn't used anymore in Exynos drm driver
so it removes relevant codes. However, display controllers -
FIMD and DECON - still use this function driver internally
to ensure shadow registers to be updated, which resolves
page fault issue so keep it.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
---
 drivers/gpu/drm/exynos/exynos7_drm_decon.c |  1 -
 drivers/gpu/drm/exynos/exynos_drm_drv.h    |  3 ---
 drivers/gpu/drm/exynos/exynos_drm_fimd.c   |  1 -
 drivers/gpu/drm/exynos/exynos_mixer.c      | 39 ------------------------------
 4 files changed, 44 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c
index 9336107..f6223f9 100644
--- a/drivers/gpu/drm/exynos/exynos7_drm_decon.c
+++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c
@@ -593,7 +593,6 @@ static const struct exynos_drm_crtc_ops decon_crtc_ops = {
 	.commit = decon_commit,
 	.enable_vblank = decon_enable_vblank,
 	.disable_vblank = decon_disable_vblank,
-	.wait_for_vblank = decon_wait_for_vblank,
 	.atomic_begin = decon_atomic_begin,
 	.update_plane = decon_update_plane,
 	.disable_plane = decon_disable_plane,
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
index 502f750..bfe835a 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
@@ -120,8 +120,6 @@ struct exynos_drm_plane_config {
  * @commit: set current hw specific display mode to hw.
  * @enable_vblank: specific driver callback for enabling vblank interrupt.
  * @disable_vblank: specific driver callback for disabling vblank interrupt.
- * @wait_for_vblank: wait for vblank interrupt to make sure that
- *	hardware overlay is updated.
  * @atomic_check: validate state
  * @atomic_begin: prepare device to receive an update
  * @atomic_flush: mark the end of device update
@@ -141,7 +139,6 @@ struct exynos_drm_crtc_ops {
 	void (*commit)(struct exynos_drm_crtc *crtc);
 	int (*enable_vblank)(struct exynos_drm_crtc *crtc);
 	void (*disable_vblank)(struct exynos_drm_crtc *crtc);
-	void (*wait_for_vblank)(struct exynos_drm_crtc *crtc);
 	int (*atomic_check)(struct exynos_drm_crtc *crtc,
 			    struct drm_crtc_state *state);
 	void (*atomic_begin)(struct exynos_drm_crtc *crtc);
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index 51d484a..752c6b0 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -902,7 +902,6 @@ static const struct exynos_drm_crtc_ops fimd_crtc_ops = {
 	.commit = fimd_commit,
 	.enable_vblank = fimd_enable_vblank,
 	.disable_vblank = fimd_disable_vblank,
-	.wait_for_vblank = fimd_wait_for_vblank,
 	.atomic_begin = fimd_atomic_begin,
 	.update_plane = fimd_update_plane,
 	.disable_plane = fimd_disable_plane,
diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
index 0a5a600..f272417 100644
--- a/drivers/gpu/drm/exynos/exynos_mixer.c
+++ b/drivers/gpu/drm/exynos/exynos_mixer.c
@@ -103,8 +103,6 @@ struct mixer_context {
 
 	struct mixer_resources	mixer_res;
 	enum mixer_version_id	mxr_ver;
-	wait_queue_head_t	wait_vsync_queue;
-	atomic_t		wait_vsync_event;
 };
 
 struct mixer_drv_data {
@@ -787,12 +785,6 @@ static irqreturn_t mixer_irq_handler(int irq, void *arg)
 
 			exynos_drm_crtc_finish_update(ctx->crtc, plane);
 		}
-
-		/* set wait vsync event to zero and wake up queue. */
-		if (atomic_read(&ctx->wait_vsync_event)) {
-			atomic_set(&ctx->wait_vsync_event, 0);
-			wake_up(&ctx->wait_vsync_queue);
-		}
 	}
 
 out:
@@ -1027,34 +1019,6 @@ static void mixer_atomic_flush(struct exynos_drm_crtc *crtc)
 	mixer_vsync_set_update(mixer_ctx, true);
 }
 
-static void mixer_wait_for_vblank(struct exynos_drm_crtc *crtc)
-{
-	struct mixer_context *mixer_ctx = crtc->ctx;
-	int err;
-
-	if (!test_bit(MXR_BIT_POWERED, &mixer_ctx->flags))
-		return;
-
-	err = drm_vblank_get(mixer_ctx->drm_dev, mixer_ctx->pipe);
-	if (err < 0) {
-		DRM_DEBUG_KMS("failed to acquire vblank counter\n");
-		return;
-	}
-
-	atomic_set(&mixer_ctx->wait_vsync_event, 1);
-
-	/*
-	 * wait for MIXER to signal VSYNC interrupt or return after
-	 * timeout which is set to 50ms (refresh rate of 20).
-	 */
-	if (!wait_event_timeout(mixer_ctx->wait_vsync_queue,
-				!atomic_read(&mixer_ctx->wait_vsync_event),
-				HZ/20))
-		DRM_DEBUG_KMS("vblank wait timed out.\n");
-
-	drm_vblank_put(mixer_ctx->drm_dev, mixer_ctx->pipe);
-}
-
 static void mixer_enable(struct exynos_drm_crtc *crtc)
 {
 	struct mixer_context *ctx = crtc->ctx;
@@ -1126,7 +1090,6 @@ static const struct exynos_drm_crtc_ops mixer_crtc_ops = {
 	.disable		= mixer_disable,
 	.enable_vblank		= mixer_enable_vblank,
 	.disable_vblank		= mixer_disable_vblank,
-	.wait_for_vblank	= mixer_wait_for_vblank,
 	.atomic_begin		= mixer_atomic_begin,
 	.update_plane		= mixer_update_plane,
 	.disable_plane		= mixer_disable_plane,
@@ -1268,8 +1231,6 @@ static int mixer_probe(struct platform_device *pdev)
 	ctx->vp_enabled = drv->is_vp_enabled;
 	ctx->has_sclk = drv->has_sclk;
 	ctx->mxr_ver = drv->version;
-	init_waitqueue_head(&ctx->wait_vsync_queue);
-	atomic_set(&ctx->wait_vsync_event, 0);
 
 	platform_set_drvdata(pdev, ctx);
 
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2016-04-05  8:27 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-05  8:27 [PATCH 0/3] drm/exynos: support HW trigger on i80 mode Inki Dae
2016-04-05  8:27 ` Inki Dae [this message]
2016-04-05  8:27 ` [PATCH 2/3] drm/exynos: fimd: add HW trigger support Inki Dae
2016-05-30 22:58   ` Javier Martinez Canillas
2016-05-31 15:18     ` Marc Zyngier
2016-05-31 23:50     ` Inki Dae
2016-06-01  5:56     ` Inki Dae
2016-06-01 13:13       ` Javier Martinez Canillas
2016-04-05  8:27 ` [PATCH 3/3] drm/exynos: decon: clean up interface type Inki Dae
2016-04-05 11:07   ` Andrzej Hajda
2016-04-05 12:52     ` Inki Dae
2016-04-12  0:40       ` Inki Dae
2016-04-12  5:55         ` Andrzej Hajda
2016-04-12  6:05           ` Inki Dae

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1459844864-12065-2-git-send-email-inki.dae@samsung.com \
    --to=inki.dae@samsung.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.