From: Vinay Simha BN <simhavcs@gmail.com> To: unlisted-recipients:; (no To-header on input) Cc: Vinay Simha BN <simhavcs@gmail.com>, Thierry Reding <thierry.reding@gmail.com>, Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Kumar Gala <galak@codeaurora.org>, dri-devel@lists.freedesktop.org (open list:DRM PANEL DRIVERS), devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings Date: Wed, 20 Apr 2016 15:02:31 +0530 [thread overview] Message-ID: <1461144755-10633-2-git-send-email-simhavcs@gmail.com> (raw) In-Reply-To: <1461144755-10633-1-git-send-email-simhavcs@gmail.com> Add documentation for lt070me05000 panel Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> --- .../bindings/display/panel/jdi,lt070me05000.txt | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt new file mode 100644 index 0000000..ffe0550 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt @@ -0,0 +1,43 @@ +JDI model LT070ME05000 1200x1920 7" DSI Panel + +Required properties: +- compatible: should be "jdi,lt070me05000" +- power-supply: phandle of the regulator that provides the supply voltage + IOVCC , power supply for LCM (1.8V) +- vddp-supply: phandle of the regulator that provides the supply voltage + Power IC supply (3-5V) +- dcdc_en-supply: phandle of the regulator that provides the supply voltage + Power IC supply enable, High active +- reset-gpio: phandle of gpio for reset line + This should be 8mA, gpio can be configured using mux and pinctrl. + XRES, Reset, Low active +- enable-gpio: phandle of gpio for enable line + LED_EN, LED backlight enable, High active +- vcc-gpio: phandle of regulator/gpio that provides the supply voltage + VDD, LED power supply (3-5V) + +Optional properties: +- pwm-gpio: phandle of gpio/pwm + pwm backlight control, this should be mapped to the backlight level + display brightness (0x51) + +Example: + + dsi0: qcom,mdss_dsi@4700000 { + panel@0 { + compatible = "jdi,lt070me05000"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&dsi_panel_pinctrl>; + + power-supply = <&pm8921_lvs5>; + vddp-supply = <&pm8921_l17>; + dcdc_en-supply = <&pm8921_lvs7>; + + reset-gpio = <&tlmm_pinmux 54 0>; + enable-gpio = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + vcc-gpio = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; + + pwm-gpio = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>; + }; + }; -- 2.1.2
WARNING: multiple messages have this Message-ID (diff)
From: Vinay Simha BN <simhavcs@gmail.com> Cc: Vinay Simha BN <simhavcs@gmail.com>, Thierry Reding <thierry.reding@gmail.com>, Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Kumar Gala <galak@codeaurora.org>, "open list:DRM PANEL DRIVERS" <dri-devel@lists.freedesktop.org>, "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@vger.kernel.org>, open list <linux-kernel@vger.kernel.org> Subject: [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings Date: Wed, 20 Apr 2016 15:02:31 +0530 [thread overview] Message-ID: <1461144755-10633-2-git-send-email-simhavcs@gmail.com> (raw) In-Reply-To: <1461144755-10633-1-git-send-email-simhavcs@gmail.com> Add documentation for lt070me05000 panel Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> --- .../bindings/display/panel/jdi,lt070me05000.txt | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt new file mode 100644 index 0000000..ffe0550 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt @@ -0,0 +1,43 @@ +JDI model LT070ME05000 1200x1920 7" DSI Panel + +Required properties: +- compatible: should be "jdi,lt070me05000" +- power-supply: phandle of the regulator that provides the supply voltage + IOVCC , power supply for LCM (1.8V) +- vddp-supply: phandle of the regulator that provides the supply voltage + Power IC supply (3-5V) +- dcdc_en-supply: phandle of the regulator that provides the supply voltage + Power IC supply enable, High active +- reset-gpio: phandle of gpio for reset line + This should be 8mA, gpio can be configured using mux and pinctrl. + XRES, Reset, Low active +- enable-gpio: phandle of gpio for enable line + LED_EN, LED backlight enable, High active +- vcc-gpio: phandle of regulator/gpio that provides the supply voltage + VDD, LED power supply (3-5V) + +Optional properties: +- pwm-gpio: phandle of gpio/pwm + pwm backlight control, this should be mapped to the backlight level + display brightness (0x51) + +Example: + + dsi0: qcom,mdss_dsi@4700000 { + panel@0 { + compatible = "jdi,lt070me05000"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&dsi_panel_pinctrl>; + + power-supply = <&pm8921_lvs5>; + vddp-supply = <&pm8921_l17>; + dcdc_en-supply = <&pm8921_lvs7>; + + reset-gpio = <&tlmm_pinmux 54 0>; + enable-gpio = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + vcc-gpio = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; + + pwm-gpio = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>; + }; + }; -- 2.1.2
next prev parent reply other threads:[~2016-04-20 9:33 UTC|newest] Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-04-13 6:28 [PATCH] drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel Vinay Simha BN 2016-04-13 6:28 ` Vinay Simha BN 2016-04-13 13:49 ` Thierry Reding 2016-04-13 13:49 ` Thierry Reding 2016-04-13 15:22 ` Vinay Simha 2016-04-14 12:38 ` Vinay Simha 2016-04-14 12:38 ` Vinay Simha 2016-04-20 9:42 ` Vinay Simha 2016-04-20 9:42 ` Vinay Simha 2016-04-14 10:47 ` [RESEND][PATCH] " Vinay Simha BN 2016-04-14 10:47 ` Vinay Simha BN 2016-04-14 17:15 ` Rob Herring 2016-04-14 17:15 ` Rob Herring 2016-04-20 9:32 ` [PATCH v2 1/4] dt-bindings: Add jdi panel vendor Vinay Simha BN 2016-04-20 9:32 ` Vinay Simha BN 2016-04-20 9:32 ` Vinay Simha BN [this message] 2016-04-20 9:32 ` [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings Vinay Simha BN 2016-04-21 15:45 ` Rob Herring 2016-04-21 15:45 ` Rob Herring 2016-04-22 6:55 ` Vinay Simha 2016-04-22 6:55 ` Vinay Simha 2016-04-22 11:59 ` Thierry Reding 2016-04-22 11:59 ` Thierry Reding 2016-04-20 9:32 ` [PATCH v2 3/4] drm/dsi: Implement set tear scanline Vinay Simha BN 2016-04-20 9:32 ` Vinay Simha BN 2016-04-20 9:53 ` kbuild test robot 2016-04-20 9:53 ` kbuild test robot 2016-04-20 10:24 ` [PATCH v3] drm/dsi: Implement set tear scanline compile fix Vinay Simha BN 2016-04-20 10:24 ` Vinay Simha BN 2016-04-20 9:32 ` [PATCH v2 4/4] drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel Vinay Simha BN 2016-04-20 9:32 ` Vinay Simha BN 2016-04-21 15:33 ` [PATCH v2 1/4] dt-bindings: Add jdi panel vendor Rob Herring 2016-04-21 15:33 ` Rob Herring 2016-04-14 14:40 ` [PATCH] drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel Archit Taneja 2016-04-14 14:40 ` Archit Taneja 2016-04-20 9:46 ` Vinay Simha 2016-04-20 9:46 ` Vinay Simha 2016-07-13 16:44 [PATCH 1/4] dt-bindings: Add Japan Display Inc vendor id Vinay Simha BN 2016-07-13 16:44 ` [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings Vinay Simha BN 2016-07-13 16:44 ` Vinay Simha BN
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1461144755-10633-2-git-send-email-simhavcs@gmail.com \ --to=simhavcs@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=galak@codeaurora.org \ --cc=ijc+devicetree@hellion.org.uk \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=pawel.moll@arm.com \ --cc=robh+dt@kernel.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.