All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Subject: [PATCH 3/5] drm/i915: Cleanup panel IRQ handling
Date: Mon, 25 Apr 2016 13:54:28 +0530	[thread overview]
Message-ID: <1461572670-32421-3-git-send-email-shubhangi.shrivastava@intel.com> (raw)
In-Reply-To: <1461572670-32421-1-git-send-email-shubhangi.shrivastava@intel.com>

IRQ bits are set by panel in DPCD 0x201 to perform various requests.
Current code clears all bits in one go and then handles them, but
this is not proper since some scenarios require full detection and
if we clear such bits the test request may not be detected in the
later part.

It is always good to clear the bits only when handled, so this patch
moves the IRQ clearing bit post handling code.

Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 387800b..de9ea18 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4144,9 +4144,14 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp,
 	}
 
 update_status:
+	/* Clear interrupt first */
+	drm_dp_dpcd_writeb(&intel_dp->aux,
+			   DP_DEVICE_SERVICE_IRQ_VECTOR,
+			   DP_AUTOMATED_TEST_REQUEST);
 	status = drm_dp_dpcd_write(&intel_dp->aux,
 				   DP_TEST_RESPONSE,
 				   &response, 1);
+
 	if (status <= 0)
 		DRM_DEBUG_KMS("Could not write test response to sink\n");
 }
@@ -4283,15 +4288,22 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)
 	/* Try to read the source of the interrupt */
 	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
 	    intel_dp_get_sink_irq(intel_dp, &sink_irq_vector)) {
-		/* Clear interrupt source */
-		drm_dp_dpcd_writeb(&intel_dp->aux,
-				   DP_DEVICE_SERVICE_IRQ_VECTOR,
-				   sink_irq_vector);
-
-		if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST)
+		if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST) {
 			intel_dp_handle_test_request(intel_dp, true);
+			sink_irq_vector &= ~DP_AUTOMATED_TEST_REQUEST;
+		}
+
 		if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ))
 			DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
+
+		/* Clear interrupt source */
+		if (sink_irq_vector) {
+			DRM_DEBUG_KMS("ATR requests not handled for %x\n",
+				      sink_irq_vector);
+			drm_dp_dpcd_writeb(&intel_dp->aux,
+					   DP_DEVICE_SERVICE_IRQ_VECTOR,
+					   sink_irq_vector);
+		}
 	}
 
 	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
-- 
2.6.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2016-04-25  8:21 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-25  8:24 [PATCH 1/5] drm/i915: Handle automated test requests for short pulse hpd Shubhangi Shrivastava
2016-04-25  8:24 ` [PATCH 2/5] drm/i915: Read test values for lane_count and link_rate Shubhangi Shrivastava
2016-04-26  4:09   ` Navare, Manasi D
2016-05-02  9:08     ` Shubhangi Shrivastava
2016-05-02  9:16       ` Thulasimani, Sivakumar
2016-04-25  8:24 ` Shubhangi Shrivastava [this message]
2016-04-25  8:24 ` [PATCH 4/5] drm/i915: Extract test reply to separate function Shubhangi Shrivastava
2016-04-25  8:24 ` [PATCH 5/5] drm/i915: Delay acknowledging of link training for ATR Shubhangi Shrivastava
2016-04-25 10:21 ` ✓ Fi.CI.BAT: success for series starting with [1/5] drm/i915: Handle automated test requests for short pulse hpd Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2016-04-21  8:40 [PATCH 1/5] " Shubhangi Shrivastava
2016-04-21  8:40 ` [PATCH 3/5] drm/i915: Cleanup panel IRQ handling Shubhangi Shrivastava

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1461572670-32421-3-git-send-email-shubhangi.shrivastava@intel.com \
    --to=shubhangi.shrivastava@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.