From: Akshay Bhat <akshay.bhat@timesys.com> To: p.zabel@pengutronix.de Cc: robh+dt@kernel.org, airlied@linux.ie, steve_longerbeam@mentor.com, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Akshay Bhat <akshay.bhat@timesys.com> Subject: [PATCH v3 1/2] drm/imx: imx-ldb: Add DDC support Date: Wed, 27 Apr 2016 16:23:33 -0400 [thread overview] Message-ID: <1461788614-7784-1-git-send-email-akshay.bhat@timesys.com> (raw) From: Steve Longerbeam <steve_longerbeam@mentor.com> Add support for reading EDID over Display Data Channel. If no DDC adapter is available, falls back to hardcoded EDID or display-timings node as before. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> --- Hi Philipp, I have addressed all your comments on v2 Patch. Thanks, Akshay v3: Move ddc_node pointer definition Warn and perform a probe deferral on failing to get ddc i2c adapter by node v2: Rebase to 4.6-rc5 Add check for channel->panel before fallback to display-timings node drivers/gpu/drm/imx/imx-ldb.c | 42 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 34 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index a58eee5..f506e8d 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -59,6 +59,7 @@ struct imx_ldb_channel { struct drm_encoder encoder; struct drm_panel *panel; struct device_node *child; + struct i2c_adapter *ddc; int chno; void *edid; int edid_len; @@ -107,6 +108,9 @@ static int imx_ldb_connector_get_modes(struct drm_connector *connector) return num_modes; } + if (!imx_ldb_ch->edid && imx_ldb_ch->ddc) + imx_ldb_ch->edid = drm_get_edid(connector, imx_ldb_ch->ddc); + if (imx_ldb_ch->edid) { drm_mode_connector_update_edid_property(connector, imx_ldb_ch->edid); @@ -553,6 +557,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) for_each_child_of_node(np, child) { struct imx_ldb_channel *channel; + struct device_node *ddc_node; struct device_node *port; ret = of_property_read_u32(child, "reg", &i); @@ -595,14 +600,34 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) } } - edidp = of_get_property(child, "edid", &channel->edid_len); - if (edidp) { - channel->edid = kmemdup(edidp, channel->edid_len, - GFP_KERNEL); - } else if (!channel->panel) { - ret = of_get_drm_display_mode(child, &channel->mode, 0); - if (!ret) - channel->mode_valid = 1; + ddc_node = of_parse_phandle(child, "ddc-i2c-bus", 0); + if (ddc_node) { + channel->ddc = of_find_i2c_adapter_by_node(ddc_node); + of_node_put(ddc_node); + if (!channel->ddc) { + dev_warn(dev, "failed to get ddc i2c adapter\n"); + return -EPROBE_DEFER; + } + } + + if (!channel->ddc) { + /* if no DDC available, fallback to hardcoded EDID */ + dev_dbg(dev, "no ddc available\n"); + + edidp = of_get_property(child, "edid", + &channel->edid_len); + if (edidp) { + channel->edid = kmemdup(edidp, + channel->edid_len, + GFP_KERNEL); + } else if (!channel->panel) { + /* fallback to display-timings node */ + ret = of_get_drm_display_mode(child, + &channel->mode, + 0); + if (!ret) + channel->mode_valid = 1; + } } channel->bus_format = of_get_bus_format(dev, child); @@ -647,6 +672,7 @@ static void imx_ldb_unbind(struct device *dev, struct device *master, channel->encoder.funcs->destroy(&channel->encoder); kfree(channel->edid); + i2c_put_adapter(channel->ddc); } } -- 2.8.1
WARNING: multiple messages have this Message-ID (diff)
From: Akshay Bhat <akshay.bhat@timesys.com> To: p.zabel@pengutronix.de Cc: devicetree@vger.kernel.org, steve_longerbeam@mentor.com, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, robh+dt@kernel.org Subject: [PATCH v3 1/2] drm/imx: imx-ldb: Add DDC support Date: Wed, 27 Apr 2016 16:23:33 -0400 [thread overview] Message-ID: <1461788614-7784-1-git-send-email-akshay.bhat@timesys.com> (raw) From: Steve Longerbeam <steve_longerbeam@mentor.com> Add support for reading EDID over Display Data Channel. If no DDC adapter is available, falls back to hardcoded EDID or display-timings node as before. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> --- Hi Philipp, I have addressed all your comments on v2 Patch. Thanks, Akshay v3: Move ddc_node pointer definition Warn and perform a probe deferral on failing to get ddc i2c adapter by node v2: Rebase to 4.6-rc5 Add check for channel->panel before fallback to display-timings node drivers/gpu/drm/imx/imx-ldb.c | 42 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 34 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index a58eee5..f506e8d 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -59,6 +59,7 @@ struct imx_ldb_channel { struct drm_encoder encoder; struct drm_panel *panel; struct device_node *child; + struct i2c_adapter *ddc; int chno; void *edid; int edid_len; @@ -107,6 +108,9 @@ static int imx_ldb_connector_get_modes(struct drm_connector *connector) return num_modes; } + if (!imx_ldb_ch->edid && imx_ldb_ch->ddc) + imx_ldb_ch->edid = drm_get_edid(connector, imx_ldb_ch->ddc); + if (imx_ldb_ch->edid) { drm_mode_connector_update_edid_property(connector, imx_ldb_ch->edid); @@ -553,6 +557,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) for_each_child_of_node(np, child) { struct imx_ldb_channel *channel; + struct device_node *ddc_node; struct device_node *port; ret = of_property_read_u32(child, "reg", &i); @@ -595,14 +600,34 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) } } - edidp = of_get_property(child, "edid", &channel->edid_len); - if (edidp) { - channel->edid = kmemdup(edidp, channel->edid_len, - GFP_KERNEL); - } else if (!channel->panel) { - ret = of_get_drm_display_mode(child, &channel->mode, 0); - if (!ret) - channel->mode_valid = 1; + ddc_node = of_parse_phandle(child, "ddc-i2c-bus", 0); + if (ddc_node) { + channel->ddc = of_find_i2c_adapter_by_node(ddc_node); + of_node_put(ddc_node); + if (!channel->ddc) { + dev_warn(dev, "failed to get ddc i2c adapter\n"); + return -EPROBE_DEFER; + } + } + + if (!channel->ddc) { + /* if no DDC available, fallback to hardcoded EDID */ + dev_dbg(dev, "no ddc available\n"); + + edidp = of_get_property(child, "edid", + &channel->edid_len); + if (edidp) { + channel->edid = kmemdup(edidp, + channel->edid_len, + GFP_KERNEL); + } else if (!channel->panel) { + /* fallback to display-timings node */ + ret = of_get_drm_display_mode(child, + &channel->mode, + 0); + if (!ret) + channel->mode_valid = 1; + } } channel->bus_format = of_get_bus_format(dev, child); @@ -647,6 +672,7 @@ static void imx_ldb_unbind(struct device *dev, struct device *master, channel->encoder.funcs->destroy(&channel->encoder); kfree(channel->edid); + i2c_put_adapter(channel->ddc); } } -- 2.8.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2016-04-27 20:24 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-04-27 20:23 Akshay Bhat [this message] 2016-04-27 20:23 ` [PATCH v3 1/2] drm/imx: imx-ldb: Add DDC support Akshay Bhat 2016-04-27 20:23 ` [PATCH v3 2/2] dt-bindings: imx: ldb: Add ddc-i2c-bus property Akshay Bhat 2016-04-27 20:23 ` Akshay Bhat 2016-04-28 21:48 ` Rob Herring 2016-04-28 21:48 ` Rob Herring 2016-04-29 7:44 ` Philipp Zabel 2016-04-29 7:44 ` Philipp Zabel 2016-05-03 16:06 ` Rob Herring 2016-05-03 16:06 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1461788614-7784-1-git-send-email-akshay.bhat@timesys.com \ --to=akshay.bhat@timesys.com \ --cc=airlied@linux.ie \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-kernel@vger.kernel.org \ --cc=p.zabel@pengutronix.de \ --cc=robh+dt@kernel.org \ --cc=steve_longerbeam@mentor.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.