All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Intel-gfx@lists.freedesktop.org
Subject: [PATCH] drm/i915: Tidy intel_dump_pipe_config a bit
Date: Thu, 28 Apr 2016 10:52:11 +0100	[thread overview]
Message-ID: <1461837131-25011-1-git-send-email-tvrtko.ursulin@linux.intel.com> (raw)

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

A few tidies with the goal of making the output more compact
and easier to read:

1. Group some data on single lines where it made sense.
2. Do not output scaler data on pre Gen9.
3. Fix plane dump so new log msg is not output in the midddle
   of the line and compact it a bit.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 69 ++++++++++++++++++------------------
 1 file changed, 35 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bc89c121562b..e658e3a07b5c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12131,6 +12131,7 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 				   const char *context)
 {
 	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
 	struct drm_plane *plane;
 	struct intel_plane *intel_plane;
 	struct intel_plane_state *state;
@@ -12139,8 +12140,8 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 	DRM_DEBUG_KMS("[CRTC:%d]%s config %p for pipe %c\n", crtc->base.base.id,
 		      context, pipe_config, pipe_name(crtc->pipe));
 
-	DRM_DEBUG_KMS("cpu_transcoder: %s\n", transcoder_name(pipe_config->cpu_transcoder));
-	DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n",
+	DRM_DEBUG_KMS("cpu_transcoder: %s; pipe bpp: %i, dithering: %i\n",
+		      transcoder_name(pipe_config->cpu_transcoder),
 		      pipe_config->pipe_bpp, pipe_config->dither);
 	DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
 		      pipe_config->has_pch_encoder,
@@ -12173,13 +12174,14 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 	DRM_DEBUG_KMS("adjusted mode:\n");
 	drm_mode_debug_printmodeline(&pipe_config->base.adjusted_mode);
 	intel_dump_crtc_timings(&pipe_config->base.adjusted_mode);
-	DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock);
-	DRM_DEBUG_KMS("pipe src size: %dx%d\n",
+	DRM_DEBUG_KMS("port clock: %d; pipe src size: %dx%d\n",
+		      pipe_config->port_clock,
 		      pipe_config->pipe_src_w, pipe_config->pipe_src_h);
-	DRM_DEBUG_KMS("num_scalers: %d, scaler_users: 0x%x, scaler_id: %d\n",
-		      crtc->num_scalers,
-		      pipe_config->scaler_state.scaler_users,
-		      pipe_config->scaler_state.scaler_id);
+	if (INTEL_GEN(dev_priv) >= 9)
+		DRM_DEBUG_KMS("num_scalers: %d, scaler_users: 0x%x, scaler_id: %d\n",
+			      crtc->num_scalers,
+			      pipe_config->scaler_state.scaler_users,
+			      pipe_config->scaler_state.scaler_id);
 	DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
 		      pipe_config->gmch_pfit.control,
 		      pipe_config->gmch_pfit.pgm_ratios,
@@ -12188,8 +12190,8 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 		      pipe_config->pch_pfit.pos,
 		      pipe_config->pch_pfit.size,
 		      pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
-	DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
-	DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
+	DRM_DEBUG_KMS("ips: %i; double wide: %i\n",
+		      pipe_config->ips_enabled, pipe_config->double_wide);
 
 	if (IS_BROXTON(dev)) {
 		DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, ebb4: 0x%x,"
@@ -12228,38 +12230,37 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 			      pipe_config->dpll_hw_state.fp1);
 	}
 
-	DRM_DEBUG_KMS("planes on this crtc\n");
+	DRM_DEBUG_KMS("Planes on this crtc:\n");
 	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
 		intel_plane = to_intel_plane(plane);
 		if (intel_plane->pipe != crtc->pipe)
 			continue;
 
+		DRM_DEBUG_KMS("  %s plane:%d (%u.%u) idx: %d\n",
+			plane->type == DRM_PLANE_TYPE_CURSOR ?
+			"cursor" : "standard",
+			plane->base.id, intel_plane->pipe,
+			(crtc->base.primary == plane) ?
+			0 : intel_plane->plane + 1,
+			drm_plane_index(plane));
+
 		state = to_intel_plane_state(plane->state);
 		fb = state->base.fb;
-		if (!fb) {
-			DRM_DEBUG_KMS("%s PLANE:%d plane: %u.%u idx: %d "
-				"disabled, scaler_id = %d\n",
-				plane->type == DRM_PLANE_TYPE_CURSOR ? "CURSOR" : "STANDARD",
-				plane->base.id, intel_plane->pipe,
-				(crtc->base.primary == plane) ? 0 : intel_plane->plane + 1,
-				drm_plane_index(plane), state->scaler_id);
-			continue;
-		}
 
-		DRM_DEBUG_KMS("%s PLANE:%d plane: %u.%u idx: %d enabled",
-			plane->type == DRM_PLANE_TYPE_CURSOR ? "CURSOR" : "STANDARD",
-			plane->base.id, intel_plane->pipe,
-			crtc->base.primary == plane ? 0 : intel_plane->plane + 1,
-			drm_plane_index(plane));
-		DRM_DEBUG_KMS("\tFB:%d, fb = %ux%u format = 0x%x",
-			fb->base.id, fb->width, fb->height, fb->pixel_format);
-		DRM_DEBUG_KMS("\tscaler:%d src (%u, %u) %ux%u dst (%u, %u) %ux%u\n",
-			state->scaler_id,
-			state->src.x1 >> 16, state->src.y1 >> 16,
-			drm_rect_width(&state->src) >> 16,
-			drm_rect_height(&state->src) >> 16,
-			state->dst.x1, state->dst.y1,
-			drm_rect_width(&state->dst), drm_rect_height(&state->dst));
+		if (fb)
+			DRM_DEBUG_KMS("\tfb:%d, %ux%u, format = 0x%x",
+				      fb->base.id, fb->width, fb->height,
+				      fb->pixel_format);
+
+		if (fb && INTEL_GEN(dev_priv) >= 9)
+			DRM_DEBUG_KMS("\tscaler:%d src (%u, %u) %ux%u dst (%u, %u) %ux%u\n",
+				      state->scaler_id,
+				      state->src.x1 >> 16, state->src.y1 >> 16,
+				      drm_rect_width(&state->src) >> 16,
+				      drm_rect_height(&state->src) >> 16,
+				      state->dst.x1, state->dst.y1,
+				      drm_rect_width(&state->dst),
+				      drm_rect_height(&state->dst));
 	}
 }
 
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2016-04-28  9:52 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-28  9:52 Tvrtko Ursulin [this message]
2016-04-28 11:23 ` ✗ Fi.CI.BAT: failure for drm/i915: Tidy intel_dump_pipe_config a bit Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1461837131-25011-1-git-send-email-tvrtko.ursulin@linux.intel.com \
    --to=tvrtko.ursulin@linux.intel.com \
    --cc=Intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.