From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-pm@vger.kernel.org, linux-usb@vger.kernel.org,
Ulf Hansson <ulf.hansson@linaro.org>,
Sebastian Reichel <sre@kernel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mark Brown <broonie@kernel.org>
Cc: tjakobi@math.uni-bielefeld.de, m.szyprowski@samsung.com,
hverkuil@xs4all.nl, Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: [RFC v2 04/13] power: pwrseq: Enable COMPILE_TEST for drivers
Date: Thu, 05 May 2016 14:34:17 +0200 [thread overview]
Message-ID: <1462451666-17945-5-git-send-email-k.kozlowski@samsung.com> (raw)
In-Reply-To: <1462451666-17945-1-git-send-email-k.kozlowski@samsung.com>
Allow build testing for power sequence drivers.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/power/pwrseq/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig
index b5d2d6c65f28..4731ba01a958 100644
--- a/drivers/power/pwrseq/Kconfig
+++ b/drivers/power/pwrseq/Kconfig
@@ -9,7 +9,7 @@ if POWER_SEQ
config POWER_SEQ_EMMC
tristate "HW reset support for eMMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects Hardware reset support aka pwrseq-emmc for eMMC
devices. By default this option is set to y.
@@ -20,7 +20,7 @@ config POWER_SEQ_EMMC
config POWER_SEQ_SIMPLE
tristate "Simple HW reset support for MMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects simple hardware reset support aka pwrseq-simple for MMC
devices. By default this option is set to y.
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Dmitry Eremin-Solenikov
<dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Greg Kroah-Hartman
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: tjakobi-o02PS0xoJP9W0yFyLvAVXMxlOr/tl8fh@public.gmane.org,
m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
hverkuil-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org,
Krzysztof Kozlowski
<k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Bartlomiej Zolnierkiewicz
<b.zolnierkie-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Subject: [RFC v2 04/13] power: pwrseq: Enable COMPILE_TEST for drivers
Date: Thu, 05 May 2016 14:34:17 +0200 [thread overview]
Message-ID: <1462451666-17945-5-git-send-email-k.kozlowski@samsung.com> (raw)
In-Reply-To: <1462451666-17945-1-git-send-email-k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Allow build testing for power sequence drivers.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
drivers/power/pwrseq/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig
index b5d2d6c65f28..4731ba01a958 100644
--- a/drivers/power/pwrseq/Kconfig
+++ b/drivers/power/pwrseq/Kconfig
@@ -9,7 +9,7 @@ if POWER_SEQ
config POWER_SEQ_EMMC
tristate "HW reset support for eMMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects Hardware reset support aka pwrseq-emmc for eMMC
devices. By default this option is set to y.
@@ -20,7 +20,7 @@ config POWER_SEQ_EMMC
config POWER_SEQ_SIMPLE
tristate "Simple HW reset support for MMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects simple hardware reset support aka pwrseq-simple for MMC
devices. By default this option is set to y.
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski@samsung.com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC v2 04/13] power: pwrseq: Enable COMPILE_TEST for drivers
Date: Thu, 05 May 2016 14:34:17 +0200 [thread overview]
Message-ID: <1462451666-17945-5-git-send-email-k.kozlowski@samsung.com> (raw)
In-Reply-To: <1462451666-17945-1-git-send-email-k.kozlowski@samsung.com>
Allow build testing for power sequence drivers.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/power/pwrseq/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig
index b5d2d6c65f28..4731ba01a958 100644
--- a/drivers/power/pwrseq/Kconfig
+++ b/drivers/power/pwrseq/Kconfig
@@ -9,7 +9,7 @@ if POWER_SEQ
config POWER_SEQ_EMMC
tristate "HW reset support for eMMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects Hardware reset support aka pwrseq-emmc for eMMC
devices. By default this option is set to y.
@@ -20,7 +20,7 @@ config POWER_SEQ_EMMC
config POWER_SEQ_SIMPLE
tristate "Simple HW reset support for MMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects simple hardware reset support aka pwrseq-simple for MMC
devices. By default this option is set to y.
--
1.9.1
next prev parent reply other threads:[~2016-05-05 12:35 UTC|newest]
Thread overview: 124+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-05 12:34 [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 12:34 ` [RFC v2 01/13] usb: misc: usb3503: Clean up on driver unbind Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 18:32 ` Javier Martinez Canillas
2016-05-05 18:32 ` Javier Martinez Canillas
2016-05-06 6:13 ` Krzysztof Kozlowski
2016-05-06 6:13 ` Krzysztof Kozlowski
2016-05-05 12:34 ` [RFC v2 02/13] power/mmc: Move pwrseq drivers to power/pwrseq Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 18:44 ` Javier Martinez Canillas
2016-05-05 18:44 ` Javier Martinez Canillas
2016-05-06 6:15 ` Krzysztof Kozlowski
2016-05-06 6:15 ` Krzysztof Kozlowski
2016-05-05 12:34 ` [RFC v2 03/13] MAINTAINERS: Retain Ulf Hansson as the same maintainer of pwrseq Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 18:46 ` Javier Martinez Canillas
2016-05-05 18:46 ` Javier Martinez Canillas
2016-05-05 12:34 ` Krzysztof Kozlowski [this message]
2016-05-05 12:34 ` [RFC v2 04/13] power: pwrseq: Enable COMPILE_TEST for drivers Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 18:57 ` Javier Martinez Canillas
2016-05-05 18:57 ` Javier Martinez Canillas
2016-05-05 18:57 ` Javier Martinez Canillas
2016-05-05 12:34 ` [RFC v2 05/13] power: pwrseq: Remove mmc prefix from mmc_pwrseq Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 19:09 ` Javier Martinez Canillas
2016-05-05 19:09 ` Javier Martinez Canillas
2016-05-06 6:20 ` Krzysztof Kozlowski
2016-05-06 6:20 ` Krzysztof Kozlowski
2016-05-05 12:34 ` [RFC v2 06/13] power: pwrseq: Generalize mmc_pwrseq operations by removing mmc prefix Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 19:14 ` Javier Martinez Canillas
2016-05-05 19:14 ` Javier Martinez Canillas
2016-05-05 19:14 ` Javier Martinez Canillas
2016-05-05 12:34 ` [RFC v2 07/13] power: pwrseq: simple: Add support for toggling regulator Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 19:31 ` Javier Martinez Canillas
2016-05-05 19:31 ` Javier Martinez Canillas
2016-05-06 6:24 ` Krzysztof Kozlowski
2016-05-06 6:24 ` Krzysztof Kozlowski
2016-05-05 12:34 ` [RFC v2 08/13] usb: hub: Handle deferred probe Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 19:33 ` Javier Martinez Canillas
2016-05-05 19:33 ` Javier Martinez Canillas
2016-05-05 12:34 ` [RFC v2 09/13] power: pwrseq: Add support for USB hubs with external power Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 19:52 ` Javier Martinez Canillas
2016-05-05 19:52 ` Javier Martinez Canillas
2016-05-05 19:52 ` Javier Martinez Canillas
2016-05-06 6:26 ` Krzysztof Kozlowski
2016-05-06 6:26 ` Krzysztof Kozlowski
2016-05-05 12:34 ` [RFC v2 10/13] usb: hub: Power sequence the ports on activation Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 14:09 ` Alan Stern
2016-05-05 14:09 ` Alan Stern
2016-05-05 14:09 ` Alan Stern
2016-05-05 17:37 ` Krzysztof Kozlowski
2016-05-05 17:37 ` Krzysztof Kozlowski
2016-05-05 19:56 ` Javier Martinez Canillas
2016-05-05 19:56 ` Javier Martinez Canillas
2016-05-05 12:34 ` [RFC v2 11/13] usb: port: Parse pwrseq phandle from Device Tree Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 20:10 ` Javier Martinez Canillas
2016-05-05 20:10 ` Javier Martinez Canillas
2016-05-06 6:27 ` Krzysztof Kozlowski
2016-05-06 6:27 ` Krzysztof Kozlowski
2016-05-05 12:34 ` [RFC v2 12/13] ARM: dts: exynos: Switch the buck8 to GPIO mode on Odroid U3 Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 20:11 ` Javier Martinez Canillas
2016-05-05 20:11 ` Javier Martinez Canillas
2016-05-05 12:34 ` [RFC v2 13/13] ARM: dts: exynos: Fix LAN and HUB after bootloader initialization " Krzysztof Kozlowski
2016-05-05 12:34 ` Krzysztof Kozlowski
2016-05-05 20:16 ` Javier Martinez Canillas
2016-05-05 20:16 ` Javier Martinez Canillas
2016-05-06 6:28 ` Krzysztof Kozlowski
2016-05-06 6:28 ` Krzysztof Kozlowski
2016-05-05 22:42 ` [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting Rob Herring
2016-05-05 22:42 ` Rob Herring
2016-05-05 22:42 ` Rob Herring
2016-05-06 5:44 ` Peter Chen
2016-05-06 5:44 ` Peter Chen
2016-05-06 6:12 ` Krzysztof Kozlowski
2016-05-06 6:12 ` Krzysztof Kozlowski
2016-05-06 7:15 ` Peter Chen
2016-05-06 7:15 ` Peter Chen
2016-05-06 7:15 ` Peter Chen
2016-05-06 6:10 ` Krzysztof Kozlowski
2016-05-06 6:10 ` Krzysztof Kozlowski
2016-05-06 13:01 ` Rob Herring
2016-05-06 13:01 ` Rob Herring
2016-05-06 13:01 ` Rob Herring
2016-05-09 7:46 ` Ulf Hansson
2016-05-09 7:46 ` Ulf Hansson
2016-05-09 7:46 ` Ulf Hansson
2016-05-09 18:18 ` Rob Herring
2016-05-09 18:18 ` Rob Herring
2016-05-09 18:18 ` Rob Herring
2016-05-10 11:02 ` Ulf Hansson
2016-05-10 11:02 ` Ulf Hansson
2016-05-10 11:02 ` Ulf Hansson
2016-05-28 3:36 ` Peter Chen
2016-05-28 3:36 ` Peter Chen
2016-05-28 3:36 ` Peter Chen
2016-05-31 0:58 ` Peter Chen
2016-05-31 0:58 ` Peter Chen
2016-05-31 0:58 ` Peter Chen
2016-05-31 11:54 ` Krzysztof Kozlowski
2016-05-31 11:54 ` Krzysztof Kozlowski
2016-05-31 11:54 ` Krzysztof Kozlowski
2016-12-13 12:20 ` Hans Verkuil
2016-12-13 12:20 ` Hans Verkuil
2016-12-13 12:34 ` Hans Verkuil
2016-12-13 12:34 ` Hans Verkuil
2016-12-13 13:53 ` Krzysztof Kozlowski
2016-12-13 13:53 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462451666-17945-5-git-send-email-k.kozlowski@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=broonie@kernel.org \
--cc=dbaryshkov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=gregkh@linuxfoundation.org \
--cc=hverkuil@xs4all.nl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=sre@kernel.org \
--cc=tjakobi@math.uni-bielefeld.de \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.