From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
To: horms@verge.net.au, geert@linux-m68k.org
Cc: linux-renesas-soc@vger.kernel.org, linux-mmc@vger.kernel.org,
sergei.shtylyov@cogentembedded.com, magnus.damm@gmail.com,
Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Subject: [PATCH v5] ARM: dts: r8a7793: Add MMCIF0
Date: Thu, 5 May 2016 17:31:45 +0200 [thread overview]
Message-ID: <1462462305-27890-1-git-send-email-ulrich.hecht+renesas@gmail.com> (raw)
Same as on r8a7791.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Now with enhanced ePAPR compliance and Acked-by.
CU
Uli
Changes since v4:
- ePAPR compliance
Changes since v3:
- set power-domains = <&sysc R8A7793_PD_ALWAYS_ON>
Changes since v2:
- change back to one DMA controller
- use GIC_SPI
- add max-frequency
arch/arm/boot/dts/r8a7793.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 1dd6d20..76c8435 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -543,6 +543,19 @@
status = "disabled";
};
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ reg-io-width = <4>;
+ status = "disabled";
+ max-frequency = <97500000>;
+ };
+
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-r8a7793",
"renesas,rcar-gen2-scifa", "renesas,scifa";
--
2.7.4
next reply other threads:[~2016-05-05 15:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-05 15:31 Ulrich Hecht [this message]
2016-05-05 23:33 ` [PATCH v5] ARM: dts: r8a7793: Add MMCIF0 Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462462305-27890-1-git-send-email-ulrich.hecht+renesas@gmail.com \
--to=ulrich.hecht+renesas@gmail.com \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=sergei.shtylyov@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.