From: Nishanth Menon <nm@ti.com>
To: "Tony Lindgren" <tony@atomide.com>,
"Benoît Cousson" <bcousson@baylibre.com>
Cc: <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-omap@vger.kernel.org>,
Nishanth Menon <nm@ti.com>
Subject: [PATCH] ARM: dts: am57xx-idk-common: Fix input supply names
Date: Thu, 5 May 2016 19:05:25 -0500 [thread overview]
Message-ID: <1462493125-27832-1-git-send-email-nm@ti.com> (raw)
Palmas Regulator is an exception and does not follow the standard
"vin-supply" common definitions for all regulators, as a result of this,
the input supplies are not reported to regulator framework, with the
obvious result of not being appropriately mapped. Fix the same.
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Based on next-20160504
Log: http://pastebin.ubuntu.com/16248817/
arch/arm/boot/dts/am57xx-idk-common.dtsi | 32 +++++++++++++++++---------------
1 file changed, 17 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index b01a5948cdd0..65ab31118140 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -60,10 +60,26 @@
tps659038_pmic {
compatible = "ti,tps659038-pmic";
+
+ smps12-in-supply = <&vmain>;
+ smps3-in-supply = <&vmain>;
+ smps45-in-supply = <&vmain>;
+ smps6-in-supply = <&vmain>;
+ smps7-in-supply = <&vmain>;
+ smps8-in-supply = <&vmain>;
+ smps9-in-supply = <&vmain>;
+ ldo1-in-supply = <&vmain>;
+ ldo2-in-supply = <&vmain>;
+ ldo3-in-supply = <&vmain>;
+ ldo4-in-supply = <&vmain>;
+ ldo9-in-supply = <&vmain>;
+ ldoln-in-supply = <&vmain>;
+ ldousb-in-supply = <&vmain>;
+ ldortc-in-supply = <&vmain>;
+
regulators {
smps12_reg: smps12 {
/* VDD_MPU */
- vin-supply = <&vmain>;
regulator-name = "smps12";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@@ -73,7 +89,6 @@
smps3_reg: smps3 {
/* VDD_DDR EMIF1 EMIF2 */
- vin-supply = <&vmain>;
regulator-name = "smps3";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
@@ -84,7 +99,6 @@
smps45_reg: smps45 {
/* VDD_DSPEVE on AM572 */
/* VDD_IVA + VDD_DSP on AM571 */
- vin-supply = <&vmain>;
regulator-name = "smps45";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@@ -94,7 +108,6 @@
smps6_reg: smps6 {
/* VDD_GPU */
- vin-supply = <&vmain>;
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@@ -104,7 +117,6 @@
smps7_reg: smps7 {
/* VDD_CORE */
- vin-supply = <&vmain>;
regulator-name = "smps7";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
@@ -115,13 +127,11 @@
smps8_reg: smps8 {
/* 5728 - VDD_IVAHD */
/* 5718 - N.C. test point */
- vin-supply = <&vmain>;
regulator-name = "smps8";
};
smps9_reg: smps9 {
/* VDD_3_3D */
- vin-supply = <&vmain>;
regulator-name = "smps9";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -132,7 +142,6 @@
ldo1_reg: ldo1 {
/* VDDSHV8 - VSDMMC */
/* NOTE: on rev 1.3a, data supply */
- vin-supply = <&vmain>;
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
@@ -142,7 +151,6 @@
ldo2_reg: ldo2 {
/* VDDSH18V */
- vin-supply = <&vmain>;
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -152,7 +160,6 @@
ldo3_reg: ldo3 {
/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
- vin-supply = <&vmain>;
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -162,7 +169,6 @@
ldo4_reg: ldo4 {
/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
- vin-supply = <&vmain>;
regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -174,7 +180,6 @@
ldo9_reg: ldo9 {
/* VDD_RTC */
- vin-supply = <&vmain>;
regulator-name = "ldo9";
regulator-min-microvolt = <840000>;
regulator-max-microvolt = <1160000>;
@@ -184,7 +189,6 @@
ldoln_reg: ldoln {
/* VDDA_1V8_PLL */
- vin-supply = <&vmain>;
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -194,7 +198,6 @@
ldousb_reg: ldousb {
/* VDDA_3V_USB: VDDA_USBHS33 */
- vin-supply = <&vmain>;
regulator-name = "ldousb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -205,7 +208,6 @@
ldortc_reg: ldortc {
/* VDDA_RTC */
vin-supply = <&vmain>;
- regulator-name = "ldortc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
--
2.8.0
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
To: "Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
"Benoît Cousson"
<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Subject: [PATCH] ARM: dts: am57xx-idk-common: Fix input supply names
Date: Thu, 5 May 2016 19:05:25 -0500 [thread overview]
Message-ID: <1462493125-27832-1-git-send-email-nm@ti.com> (raw)
Palmas Regulator is an exception and does not follow the standard
"vin-supply" common definitions for all regulators, as a result of this,
the input supplies are not reported to regulator framework, with the
obvious result of not being appropriately mapped. Fix the same.
Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
---
Based on next-20160504
Log: http://pastebin.ubuntu.com/16248817/
arch/arm/boot/dts/am57xx-idk-common.dtsi | 32 +++++++++++++++++---------------
1 file changed, 17 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index b01a5948cdd0..65ab31118140 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -60,10 +60,26 @@
tps659038_pmic {
compatible = "ti,tps659038-pmic";
+
+ smps12-in-supply = <&vmain>;
+ smps3-in-supply = <&vmain>;
+ smps45-in-supply = <&vmain>;
+ smps6-in-supply = <&vmain>;
+ smps7-in-supply = <&vmain>;
+ smps8-in-supply = <&vmain>;
+ smps9-in-supply = <&vmain>;
+ ldo1-in-supply = <&vmain>;
+ ldo2-in-supply = <&vmain>;
+ ldo3-in-supply = <&vmain>;
+ ldo4-in-supply = <&vmain>;
+ ldo9-in-supply = <&vmain>;
+ ldoln-in-supply = <&vmain>;
+ ldousb-in-supply = <&vmain>;
+ ldortc-in-supply = <&vmain>;
+
regulators {
smps12_reg: smps12 {
/* VDD_MPU */
- vin-supply = <&vmain>;
regulator-name = "smps12";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@@ -73,7 +89,6 @@
smps3_reg: smps3 {
/* VDD_DDR EMIF1 EMIF2 */
- vin-supply = <&vmain>;
regulator-name = "smps3";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
@@ -84,7 +99,6 @@
smps45_reg: smps45 {
/* VDD_DSPEVE on AM572 */
/* VDD_IVA + VDD_DSP on AM571 */
- vin-supply = <&vmain>;
regulator-name = "smps45";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@@ -94,7 +108,6 @@
smps6_reg: smps6 {
/* VDD_GPU */
- vin-supply = <&vmain>;
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@@ -104,7 +117,6 @@
smps7_reg: smps7 {
/* VDD_CORE */
- vin-supply = <&vmain>;
regulator-name = "smps7";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
@@ -115,13 +127,11 @@
smps8_reg: smps8 {
/* 5728 - VDD_IVAHD */
/* 5718 - N.C. test point */
- vin-supply = <&vmain>;
regulator-name = "smps8";
};
smps9_reg: smps9 {
/* VDD_3_3D */
- vin-supply = <&vmain>;
regulator-name = "smps9";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -132,7 +142,6 @@
ldo1_reg: ldo1 {
/* VDDSHV8 - VSDMMC */
/* NOTE: on rev 1.3a, data supply */
- vin-supply = <&vmain>;
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
@@ -142,7 +151,6 @@
ldo2_reg: ldo2 {
/* VDDSH18V */
- vin-supply = <&vmain>;
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -152,7 +160,6 @@
ldo3_reg: ldo3 {
/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
- vin-supply = <&vmain>;
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -162,7 +169,6 @@
ldo4_reg: ldo4 {
/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
- vin-supply = <&vmain>;
regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -174,7 +180,6 @@
ldo9_reg: ldo9 {
/* VDD_RTC */
- vin-supply = <&vmain>;
regulator-name = "ldo9";
regulator-min-microvolt = <840000>;
regulator-max-microvolt = <1160000>;
@@ -184,7 +189,6 @@
ldoln_reg: ldoln {
/* VDDA_1V8_PLL */
- vin-supply = <&vmain>;
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -194,7 +198,6 @@
ldousb_reg: ldousb {
/* VDDA_3V_USB: VDDA_USBHS33 */
- vin-supply = <&vmain>;
regulator-name = "ldousb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -205,7 +208,6 @@
ldortc_reg: ldortc {
/* VDDA_RTC */
vin-supply = <&vmain>;
- regulator-name = "ldortc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
--
2.8.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: am57xx-idk-common: Fix input supply names
Date: Thu, 5 May 2016 19:05:25 -0500 [thread overview]
Message-ID: <1462493125-27832-1-git-send-email-nm@ti.com> (raw)
Palmas Regulator is an exception and does not follow the standard
"vin-supply" common definitions for all regulators, as a result of this,
the input supplies are not reported to regulator framework, with the
obvious result of not being appropriately mapped. Fix the same.
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Based on next-20160504
Log: http://pastebin.ubuntu.com/16248817/
arch/arm/boot/dts/am57xx-idk-common.dtsi | 32 +++++++++++++++++---------------
1 file changed, 17 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index b01a5948cdd0..65ab31118140 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -60,10 +60,26 @@
tps659038_pmic {
compatible = "ti,tps659038-pmic";
+
+ smps12-in-supply = <&vmain>;
+ smps3-in-supply = <&vmain>;
+ smps45-in-supply = <&vmain>;
+ smps6-in-supply = <&vmain>;
+ smps7-in-supply = <&vmain>;
+ smps8-in-supply = <&vmain>;
+ smps9-in-supply = <&vmain>;
+ ldo1-in-supply = <&vmain>;
+ ldo2-in-supply = <&vmain>;
+ ldo3-in-supply = <&vmain>;
+ ldo4-in-supply = <&vmain>;
+ ldo9-in-supply = <&vmain>;
+ ldoln-in-supply = <&vmain>;
+ ldousb-in-supply = <&vmain>;
+ ldortc-in-supply = <&vmain>;
+
regulators {
smps12_reg: smps12 {
/* VDD_MPU */
- vin-supply = <&vmain>;
regulator-name = "smps12";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@@ -73,7 +89,6 @@
smps3_reg: smps3 {
/* VDD_DDR EMIF1 EMIF2 */
- vin-supply = <&vmain>;
regulator-name = "smps3";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
@@ -84,7 +99,6 @@
smps45_reg: smps45 {
/* VDD_DSPEVE on AM572 */
/* VDD_IVA + VDD_DSP on AM571 */
- vin-supply = <&vmain>;
regulator-name = "smps45";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@@ -94,7 +108,6 @@
smps6_reg: smps6 {
/* VDD_GPU */
- vin-supply = <&vmain>;
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@@ -104,7 +117,6 @@
smps7_reg: smps7 {
/* VDD_CORE */
- vin-supply = <&vmain>;
regulator-name = "smps7";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
@@ -115,13 +127,11 @@
smps8_reg: smps8 {
/* 5728 - VDD_IVAHD */
/* 5718 - N.C. test point */
- vin-supply = <&vmain>;
regulator-name = "smps8";
};
smps9_reg: smps9 {
/* VDD_3_3D */
- vin-supply = <&vmain>;
regulator-name = "smps9";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -132,7 +142,6 @@
ldo1_reg: ldo1 {
/* VDDSHV8 - VSDMMC */
/* NOTE: on rev 1.3a, data supply */
- vin-supply = <&vmain>;
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
@@ -142,7 +151,6 @@
ldo2_reg: ldo2 {
/* VDDSH18V */
- vin-supply = <&vmain>;
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -152,7 +160,6 @@
ldo3_reg: ldo3 {
/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
- vin-supply = <&vmain>;
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -162,7 +169,6 @@
ldo4_reg: ldo4 {
/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
- vin-supply = <&vmain>;
regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -174,7 +180,6 @@
ldo9_reg: ldo9 {
/* VDD_RTC */
- vin-supply = <&vmain>;
regulator-name = "ldo9";
regulator-min-microvolt = <840000>;
regulator-max-microvolt = <1160000>;
@@ -184,7 +189,6 @@
ldoln_reg: ldoln {
/* VDDA_1V8_PLL */
- vin-supply = <&vmain>;
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -194,7 +198,6 @@
ldousb_reg: ldousb {
/* VDDA_3V_USB: VDDA_USBHS33 */
- vin-supply = <&vmain>;
regulator-name = "ldousb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -205,7 +208,6 @@
ldortc_reg: ldortc {
/* VDDA_RTC */
vin-supply = <&vmain>;
- regulator-name = "ldortc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
--
2.8.0
next reply other threads:[~2016-05-06 0:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-06 0:05 Nishanth Menon [this message]
2016-05-06 0:05 ` [PATCH] ARM: dts: am57xx-idk-common: Fix input supply names Nishanth Menon
2016-05-06 0:05 ` Nishanth Menon
2016-05-06 12:48 ` Nishanth Menon
2016-05-06 12:48 ` Nishanth Menon
2016-05-06 12:48 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462493125-27832-1-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.