From: Krzysztof Kozlowski <krzk@kernel.org> To: Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <k.kozlowski@samsung.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, Tomasz Figa <tomasz.figa@gmail.com>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@codeaurora.org>, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org Cc: Javier Martinez Canillas <javier@osg.samsung.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org> Subject: [PATCH v3 22/27] ARM: dts: exynos: Add initial support for Odroid XU board Date: Tue, 10 May 2016 22:09:25 +0200 [thread overview] Message-ID: <1462910970-1812-23-git-send-email-krzk@kernel.org> (raw) In-Reply-To: <1462910970-1812-1-git-send-email-krzk@kernel.org> The Hardkernel's Odroid XU board was first design with big.LITTLE SoC from Samsung: the Exynos5410. Comparing the board to more popular now Odroid XU3, the differences are: 1. Exynos5410 instead of 5422, 2. MIPI DSI LCD connector, 3. Main PMIC: Maxim 77802 instead of S2MPS11, 4. USB3503+LAN9730 instead of integrated LAN9514, 5. eMMC 4.5 instead of eMMC 5.0, This patch adds initial support for the XU board with working basic functions, eMMC/SD and USB (including attached ethernet adapter). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> --- .../bindings/arm/samsung/samsung-boards.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5410-odroidxu.dts | 121 +++++++++++++++++++++ 3 files changed, 123 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dts diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index f5deace2b380..0ea7f14ef294 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -47,6 +47,7 @@ Required root node properties: - "hardkernel,odroid-u3" - for Exynos4412-based Hardkernel Odroid U3. - "hardkernel,odroid-x" - for Exynos4412-based Hardkernel Odroid X. - "hardkernel,odroid-x2" - for Exynos4412-based Hardkernel Odroid X2. + - "hardkernel,odroid-xu" - for Exynos5410-based Hardkernel Odroid XU. - "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3. - "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel Odroid XU3 Lite board. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5aeb10674370..9ed1c7abedb1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -134,6 +134,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5250-snow-rev5.dtb \ exynos5250-spring.dtb \ exynos5260-xyref5260.dtb \ + exynos5410-odroidxu.dtb \ exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts new file mode 100644 index 000000000000..44ba00a6636f --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -0,0 +1,121 @@ +/* + * Hardkernel Odroid XU board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2016 Krzysztof Kozlowski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5410.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "exynos54xx-odroidxu-leds.dtsi" + +/ { + model = "Hardkernel Odroid XU"; + compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x7ea00000>; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + emmc_pwrseq: pwrseq { + pinctrl-0 = <&emmc_nrst_pin>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 20972 0>; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; + cooling-levels = <0 130 170 230>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; +}; + +&mmc_0 { + status = "okay"; + mmc-pwrseq = <&emmc_pwrseq>; + cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; +}; + +&pinctrl_0 { + emmc_nrst_pin: emmc-nrst { + samsung,pins = "gpd1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "peripheral"; +}; -- 2.5.0
WARNING: multiple messages have this Message-ID (diff)
From: krzk@kernel.org (Krzysztof Kozlowski) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 22/27] ARM: dts: exynos: Add initial support for Odroid XU board Date: Tue, 10 May 2016 22:09:25 +0200 [thread overview] Message-ID: <1462910970-1812-23-git-send-email-krzk@kernel.org> (raw) In-Reply-To: <1462910970-1812-1-git-send-email-krzk@kernel.org> The Hardkernel's Odroid XU board was first design with big.LITTLE SoC from Samsung: the Exynos5410. Comparing the board to more popular now Odroid XU3, the differences are: 1. Exynos5410 instead of 5422, 2. MIPI DSI LCD connector, 3. Main PMIC: Maxim 77802 instead of S2MPS11, 4. USB3503+LAN9730 instead of integrated LAN9514, 5. eMMC 4.5 instead of eMMC 5.0, This patch adds initial support for the XU board with working basic functions, eMMC/SD and USB (including attached ethernet adapter). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> --- .../bindings/arm/samsung/samsung-boards.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5410-odroidxu.dts | 121 +++++++++++++++++++++ 3 files changed, 123 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dts diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index f5deace2b380..0ea7f14ef294 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -47,6 +47,7 @@ Required root node properties: - "hardkernel,odroid-u3" - for Exynos4412-based Hardkernel Odroid U3. - "hardkernel,odroid-x" - for Exynos4412-based Hardkernel Odroid X. - "hardkernel,odroid-x2" - for Exynos4412-based Hardkernel Odroid X2. + - "hardkernel,odroid-xu" - for Exynos5410-based Hardkernel Odroid XU. - "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3. - "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel Odroid XU3 Lite board. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5aeb10674370..9ed1c7abedb1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -134,6 +134,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5250-snow-rev5.dtb \ exynos5250-spring.dtb \ exynos5260-xyref5260.dtb \ + exynos5410-odroidxu.dtb \ exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts new file mode 100644 index 000000000000..44ba00a6636f --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -0,0 +1,121 @@ +/* + * Hardkernel Odroid XU board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2016 Krzysztof Kozlowski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5410.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "exynos54xx-odroidxu-leds.dtsi" + +/ { + model = "Hardkernel Odroid XU"; + compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x7ea00000>; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + emmc_pwrseq: pwrseq { + pinctrl-0 = <&emmc_nrst_pin>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 20972 0>; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; + cooling-levels = <0 130 170 230>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + firmware at 02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; +}; + +&mmc_0 { + status = "okay"; + mmc-pwrseq = <&emmc_pwrseq>; + cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; +}; + +&pinctrl_0 { + emmc_nrst_pin: emmc-nrst { + samsung,pins = "gpd1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "peripheral"; +}; -- 2.5.0
next prev parent reply other threads:[~2016-05-10 20:11 UTC|newest] Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-05-10 20:09 [PATCH v3 00/27] ARM: dts: exynos: Add initial support for Odroid XU Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 01/27] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 02/27] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410 Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 03/27] ARM: dts: exynos: Add fin_pll node for clock driver Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 04/27] clk: samsung: exynos5410: Provide fin_pll external fixed clock Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 05/27] ARM: dts: exynos: Switch MCT node to a new fin_pll clock Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 06/27] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410 Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 07/27] clk: samsung: exynos5410: Rename fin_pll from temporary to regular name Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 08/27] clk: samsung: exynos5410: Add serial3, USB and PWM clocks Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 09/27] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 10/27] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 11/27] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 12/27] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 13/27] ARM: dts: exynos: Move common nodes to exynos5.dtsi Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 14/27] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 15/27] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 16/27] ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 17/27] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 18/27] ARM: dts: exynos: Enable UART3 on Exynos5410 Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 19/27] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 20/27] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 21/27] ARM: dts: exynos: Add USB to Exynos5410 Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski [this message] 2016-05-10 20:09 ` [PATCH v3 22/27] ARM: dts: exynos: Add initial support for Odroid XU board Krzysztof Kozlowski 2016-05-10 20:09 ` [PATCH v3 23/27] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410 Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-11 12:31 ` Javier Martinez Canillas 2016-05-11 12:31 ` Javier Martinez Canillas 2016-05-10 20:09 ` [PATCH v3 24/27] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-11 12:32 ` Javier Martinez Canillas 2016-05-11 12:32 ` Javier Martinez Canillas 2016-05-10 20:09 ` [PATCH v3 25/27] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-11 12:33 ` Javier Martinez Canillas 2016-05-11 12:33 ` Javier Martinez Canillas 2016-05-10 20:09 ` [PATCH v3 26/27] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410 Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-11 12:36 ` Javier Martinez Canillas 2016-05-11 12:36 ` Javier Martinez Canillas 2016-05-11 12:36 ` Javier Martinez Canillas 2016-05-10 20:09 ` [PATCH v3 27/27] ARM: dts: exynos: Add RTC and I2C " Krzysztof Kozlowski 2016-05-10 20:09 ` Krzysztof Kozlowski 2016-05-11 12:44 ` Javier Martinez Canillas 2016-05-11 12:44 ` Javier Martinez Canillas 2016-05-11 12:54 ` Krzysztof Kozlowski 2016-05-11 12:54 ` Krzysztof Kozlowski 2016-05-11 15:41 ` [PATCH v3 00/27] ARM: dts: exynos: Add initial support for Odroid XU Javier Martinez Canillas 2016-05-11 15:41 ` Javier Martinez Canillas 2016-05-11 18:14 ` Krzysztof Kozlowski 2016-05-11 18:14 ` Krzysztof Kozlowski 2016-05-13 12:03 ` Robin Murphy 2016-05-13 12:03 ` Robin Murphy 2016-05-13 12:11 ` Krzysztof Kozlowski 2016-05-13 12:11 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1462910970-1812-23-git-send-email-krzk@kernel.org \ --to=krzk@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=javier@osg.samsung.com \ --cc=k.kozlowski@samsung.com \ --cc=kgene@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=s.nawrocki@samsung.com \ --cc=sboyd@codeaurora.org \ --cc=tomasz.figa@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.