All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 09/69] block: Introduce bdrv_driver_pwritev()
Date: Thu, 12 May 2016 16:34:49 +0200	[thread overview]
Message-ID: <1463063749-2201-10-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1463063749-2201-1-git-send-email-kwolf@redhat.com>

This is a function that simply calls into the block driver for doing a
write, providing the byte granularity interface we want to eventually
have everywhere, and using whatever interface that driver supports.

This one is a bit more interesting than the version for reads: It adds
support for .bdrv_co_writev_flags() everywhere, so that drivers
implementing this function can drop .bdrv_co_writev() now.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
 block/io.c      | 51 ++++++++++++++++++++++++++++++++++++---------------
 block/iscsi.c   |  8 --------
 block/nbd.c     |  9 ---------
 block/raw_bsd.c |  8 --------
 4 files changed, 36 insertions(+), 40 deletions(-)

diff --git a/block/io.c b/block/io.c
index d3617fe..53b4f2c 100644
--- a/block/io.c
+++ b/block/io.c
@@ -812,6 +812,36 @@ static int coroutine_fn bdrv_driver_preadv(BlockDriverState *bs,
     return drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
 }
 
+static int coroutine_fn bdrv_driver_pwritev(BlockDriverState *bs,
+                                            uint64_t offset, uint64_t bytes,
+                                            QEMUIOVector *qiov, int flags)
+{
+    BlockDriver *drv = bs->drv;
+    int64_t sector_num = offset >> BDRV_SECTOR_BITS;
+    unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
+    int ret;
+
+    assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
+    assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
+    assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
+
+    if (drv->bdrv_co_writev_flags) {
+        ret = drv->bdrv_co_writev_flags(bs, sector_num, nb_sectors, qiov,
+                                        flags);
+    } else {
+        assert(drv->supported_write_flags == 0);
+        ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
+    }
+
+    if (ret == 0 && (flags & BDRV_REQ_FUA) &&
+        !(drv->supported_write_flags & BDRV_REQ_FUA))
+    {
+        ret = bdrv_co_flush(bs);
+    }
+
+    return ret;
+}
+
 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
         int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
 {
@@ -863,8 +893,9 @@ static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
         /* This does not change the data on the disk, it is not necessary
          * to flush even in cache=writethrough mode.
          */
-        ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
-                                  &bounce_qiov);
+        ret = bdrv_driver_pwritev(bs, cluster_sector_num * BDRV_SECTOR_SIZE,
+                                  cluster_nb_sectors * BDRV_SECTOR_SIZE,
+                                  &bounce_qiov, 0);
     }
 
     if (ret < 0) {
@@ -1152,7 +1183,8 @@ static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
             }
             qemu_iovec_init_external(&qiov, &iov, 1);
 
-            ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
+            ret = bdrv_driver_pwritev(bs, sector_num * BDRV_SECTOR_SIZE,
+                                      num * BDRV_SECTOR_SIZE, &qiov, 0);
 
             /* Keep bounce buffer around if it is big enough for all
              * all future requests.
@@ -1212,23 +1244,12 @@ static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
     } else if (flags & BDRV_REQ_ZERO_WRITE) {
         bdrv_debug_event(bs, BLKDBG_PWRITEV_ZERO);
         ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
-    } else if (drv->bdrv_co_writev_flags) {
-        bdrv_debug_event(bs, BLKDBG_PWRITEV);
-        ret = drv->bdrv_co_writev_flags(bs, sector_num, nb_sectors, qiov,
-                                        flags);
     } else {
-        assert(drv->supported_write_flags == 0);
         bdrv_debug_event(bs, BLKDBG_PWRITEV);
-        ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
+        ret = bdrv_driver_pwritev(bs, offset, bytes, qiov, flags);
     }
     bdrv_debug_event(bs, BLKDBG_PWRITEV_DONE);
 
-    if (ret == 0 && (flags & BDRV_REQ_FUA) &&
-        !(drv->supported_write_flags & BDRV_REQ_FUA))
-    {
-        ret = bdrv_co_flush(bs);
-    }
-
     bdrv_set_dirty(bs, sector_num, nb_sectors);
 
     if (bs->wr_highest_offset < offset + bytes) {
diff --git a/block/iscsi.c b/block/iscsi.c
index 302baf8..4f75204 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -513,13 +513,6 @@ retry:
     return 0;
 }
 
-static int coroutine_fn
-iscsi_co_writev(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
-                QEMUIOVector *iov)
-{
-    return iscsi_co_writev_flags(bs, sector_num, nb_sectors, iov, 0);
-}
-
 
 static bool iscsi_allocationmap_is_allocated(IscsiLun *iscsilun,
                                              int64_t sector_num, int nb_sectors)
@@ -1847,7 +1840,6 @@ static BlockDriver bdrv_iscsi = {
     .bdrv_co_discard      = iscsi_co_discard,
     .bdrv_co_write_zeroes = iscsi_co_write_zeroes,
     .bdrv_co_readv         = iscsi_co_readv,
-    .bdrv_co_writev        = iscsi_co_writev,
     .bdrv_co_writev_flags  = iscsi_co_writev_flags,
     .supported_write_flags = BDRV_REQ_FUA,
     .bdrv_co_flush_to_disk = iscsi_co_flush,
diff --git a/block/nbd.c b/block/nbd.c
index f7ea3b3..fccbfef 100644
--- a/block/nbd.c
+++ b/block/nbd.c
@@ -374,12 +374,6 @@ static int nbd_co_writev_flags(BlockDriverState *bs, int64_t sector_num,
     return ret;
 }
 
-static int nbd_co_writev(BlockDriverState *bs, int64_t sector_num,
-                         int nb_sectors, QEMUIOVector *qiov)
-{
-    return nbd_co_writev_flags(bs, sector_num, nb_sectors, qiov, 0);
-}
-
 static int nbd_co_flush(BlockDriverState *bs)
 {
     return nbd_client_co_flush(bs);
@@ -476,7 +470,6 @@ static BlockDriver bdrv_nbd = {
     .bdrv_parse_filename        = nbd_parse_filename,
     .bdrv_file_open             = nbd_open,
     .bdrv_co_readv              = nbd_co_readv,
-    .bdrv_co_writev             = nbd_co_writev,
     .bdrv_co_writev_flags       = nbd_co_writev_flags,
     .supported_write_flags      = BDRV_REQ_FUA,
     .bdrv_close                 = nbd_close,
@@ -496,7 +489,6 @@ static BlockDriver bdrv_nbd_tcp = {
     .bdrv_parse_filename        = nbd_parse_filename,
     .bdrv_file_open             = nbd_open,
     .bdrv_co_readv              = nbd_co_readv,
-    .bdrv_co_writev             = nbd_co_writev,
     .bdrv_co_writev_flags       = nbd_co_writev_flags,
     .supported_write_flags      = BDRV_REQ_FUA,
     .bdrv_close                 = nbd_close,
@@ -516,7 +508,6 @@ static BlockDriver bdrv_nbd_unix = {
     .bdrv_parse_filename        = nbd_parse_filename,
     .bdrv_file_open             = nbd_open,
     .bdrv_co_readv              = nbd_co_readv,
-    .bdrv_co_writev             = nbd_co_writev,
     .bdrv_co_writev_flags       = nbd_co_writev_flags,
     .supported_write_flags      = BDRV_REQ_FUA,
     .bdrv_close                 = nbd_close,
diff --git a/block/raw_bsd.c b/block/raw_bsd.c
index a6cc7e9..9c9d39b 100644
--- a/block/raw_bsd.c
+++ b/block/raw_bsd.c
@@ -116,13 +116,6 @@ fail:
     return ret;
 }
 
-static int coroutine_fn
-raw_co_writev(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
-              QEMUIOVector *qiov)
-{
-    return raw_co_writev_flags(bs, sector_num, nb_sectors, qiov, 0);
-}
-
 static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
                                             int64_t sector_num,
                                             int nb_sectors, int *pnum,
@@ -256,7 +249,6 @@ BlockDriver bdrv_raw = {
     .bdrv_close           = &raw_close,
     .bdrv_create          = &raw_create,
     .bdrv_co_readv        = &raw_co_readv,
-    .bdrv_co_writev       = &raw_co_writev,
     .bdrv_co_writev_flags = &raw_co_writev_flags,
     .supported_write_flags = BDRV_REQ_FUA,
     .bdrv_co_write_zeroes = &raw_co_write_zeroes,
-- 
1.8.3.1

  parent reply	other threads:[~2016-05-12 14:36 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-12 14:34 [Qemu-devel] [PULL 00/69] Block layer patches Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 01/69] block: Don't disable I/O throttling on sync requests Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 02/69] block: make bdrv_start_throttled_reqs return void Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 03/69] block: move restarting of throttled reqs to block/throttle-groups.c Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 04/69] block: extract bdrv_drain_poll/bdrv_co_yield_to_drain from bdrv_drain/bdrv_co_drain Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 05/69] block: introduce bdrv_no_throttling_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 06/69] block: plug whole tree at once, introduce bdrv_io_unplugged_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 07/69] linux-aio: make it more type safe Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 08/69] block: Introduce bdrv_driver_preadv() Kevin Wolf
2016-05-12 14:34 ` Kevin Wolf [this message]
2016-05-12 14:34 ` [Qemu-devel] [PULL 10/69] block: Support AIO drivers in bdrv_driver_preadv/pwritev() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 11/69] block: Rename bdrv_co_do_preadv/writev to bdrv_co_preadv/writev Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 12/69] block: Introduce .bdrv_co_preadv/pwritev BlockDriver function Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 13/69] bochs: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 14/69] cloop: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 15/69] dmg: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 16/69] vdi: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 17/69] vdi: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 18/69] vmdk: Add vmdk_find_offset_in_cluster() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 19/69] vmdk: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 20/69] vmdk: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 21/69] vpc: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 22/69] vpc: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 23/69] vvfat: Implement .bdrv_co_preadv/pwritev interfaces Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 24/69] block: Remove BlockDriver.bdrv_read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 25/69] block: Fix typo in comment Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 26/69] block: always compile-check debug prints Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 27/69] Allow users to specify the vmdk virtual hardware version Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 28/69] qemu-io: Fix memory leak in 'aio_write -z' Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 29/69] block: Allow BDRV_REQ_FUA through blk_pwrite() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 30/69] block: Switch blk_read_unthrottled() to byte interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 31/69] block: Switch blk_*write_zeroes() " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 32/69] block: Introduce byte-based aio read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 33/69] ide: Switch to byte-based aio block access Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 34/69] scsi-disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 35/69] virtio: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 36/69] xen_disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 37/69] fdc: Switch to byte-based " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 38/69] nand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 39/69] onenand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 40/69] pflash: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 41/69] sd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 42/69] m25p80: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 43/69] atapi: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 44/69] nbd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 45/69] qemu-img: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 46/69] qemu-io: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 47/69] block: Kill unused sector-based blk_* functions Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 48/69] qcow2: improve qcow2_co_write_zeroes() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 49/69] block: Make supported_write_flags a per-bds property Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 50/69] block: Honor BDRV_REQ_FUA during write_zeroes Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 51/69] nbd: Simplify client FUA handling Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 52/69] block: Invalidate all children Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 53/69] block: Drop superfluous invalidating bs->file from drivers Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 54/69] block: Inactivate all children Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 55/69] iotests: fix the redirection order in 083 Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 56/69] qemu-img: check block status of backing file when converting Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 57/69] Add new block driver interface to add/delete a BDS's child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 58/69] quorum: implement bdrv_add_child() and bdrv_del_child() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 59/69] qmp: add monitor command to add/remove a child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 60/69] qemu-io: Add missing option documentation Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 61/69] qemu-io: Make 'open' subcommand more like command line Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 62/69] qemu-io: Use bool for command line flags Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 63/69] qemu-io: Allow unaligned access by default Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 64/69] qemu-io: Add 'write -f' to test FUA flag Kevin Wolf
2016-05-12 21:23   ` Eric Blake
2016-05-12 14:35 ` [Qemu-devel] [PULL 65/69] qemu-io: Add 'write -z -u' to test MAY_UNMAP flag Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 66/69] block: add support for --image-opts in block I/O tests Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 67/69] block: add support for encryption secrets " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 68/69] block: enable testing of LUKS driver with " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 69/69] qemu-iotests: iotests: fail hard if not run via "check" Kevin Wolf
2016-05-12 16:19 ` [Qemu-devel] [PULL 00/69] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463063749-2201-10-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.