From: Chen-Yu Tsai <wens@csie.org> To: Maxime Ripard <maxime.ripard@free-electrons.com>, David Airlie <airlied@linux.ie> Cc: devicetree@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>, dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Hans de Goede <hdegoede@redhat.com> Subject: [PATCH 5/6] ARM: dts: sun5i: q8-common: Enable audio codec Date: Tue, 17 May 2016 23:56:10 +0800 [thread overview] Message-ID: <1463500571-28970-6-git-send-email-wens@csie.org> (raw) In-Reply-To: <1463500571-28970-1-git-send-email-wens@csie.org> The Q8 tablets use the audio codec to provide audio output via a headphone jack or a small mono speaker. A GPIO output is used to control speaker amp. The tablets may or may not have an internal microphone. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun5i-q8-common.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-q8-common.dtsi b/arch/arm/boot/dts/sun5i-q8-common.dtsi index 8fc1b6110fb8..5b065fd542f0 100644 --- a/arch/arm/boot/dts/sun5i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun5i-q8-common.dtsi @@ -61,6 +61,13 @@ }; }; +&codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -100,6 +107,13 @@ }; &pio { + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PG10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc0_cd_pin_q8: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; -- 2.8.1
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 5/6] ARM: dts: sun5i: q8-common: Enable audio codec Date: Tue, 17 May 2016 23:56:10 +0800 [thread overview] Message-ID: <1463500571-28970-6-git-send-email-wens@csie.org> (raw) In-Reply-To: <1463500571-28970-1-git-send-email-wens@csie.org> The Q8 tablets use the audio codec to provide audio output via a headphone jack or a small mono speaker. A GPIO output is used to control speaker amp. The tablets may or may not have an internal microphone. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun5i-q8-common.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-q8-common.dtsi b/arch/arm/boot/dts/sun5i-q8-common.dtsi index 8fc1b6110fb8..5b065fd542f0 100644 --- a/arch/arm/boot/dts/sun5i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun5i-q8-common.dtsi @@ -61,6 +61,13 @@ }; }; +&codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -100,6 +107,13 @@ }; &pio { + codec_pa_pin: codec_pa_pin at 0 { + allwinner,pins = "PG10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc0_cd_pin_q8: mmc0_cd_pin at 0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; -- 2.8.1
next prev parent reply other threads:[~2016-05-17 15:56 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-05-17 15:56 [PATCH 0/6] ARM: dts: sun5i: q8-common: Enable various peripherals Chen-Yu Tsai 2016-05-17 15:56 ` Chen-Yu Tsai 2016-05-17 15:56 ` Chen-Yu Tsai 2016-05-17 15:56 ` [PATCH 1/6] drm: sun4i: do cleanup if RGB output init fails Chen-Yu Tsai 2016-05-17 15:56 ` Chen-Yu Tsai 2016-05-17 15:56 ` Chen-Yu Tsai 2016-05-25 12:38 ` Maxime Ripard 2016-05-25 12:38 ` Maxime Ripard 2016-05-17 15:56 ` [PATCH 2/6] ARM: dts: axp209: Disable ldo5 by default Chen-Yu Tsai 2016-05-17 15:56 ` Chen-Yu Tsai 2016-05-25 12:39 ` Maxime Ripard 2016-05-25 12:39 ` Maxime Ripard 2016-05-25 12:39 ` Maxime Ripard 2016-05-17 15:56 ` [PATCH 3/6] ARM: dts: sun5i: q8-common: Enable USB-based WiFi Chen-Yu Tsai 2016-05-17 15:56 ` Chen-Yu Tsai 2016-05-17 15:56 ` Chen-Yu Tsai 2016-05-17 15:56 ` [PATCH 4/6] ARM: dts: sun5i: q8-common: Enable USB power supply Chen-Yu Tsai 2016-05-17 15:56 ` Chen-Yu Tsai 2016-05-25 12:41 ` Maxime Ripard 2016-05-25 12:41 ` Maxime Ripard 2016-05-17 15:56 ` Chen-Yu Tsai [this message] 2016-05-17 15:56 ` [PATCH 5/6] ARM: dts: sun5i: q8-common: Enable audio codec Chen-Yu Tsai 2016-05-25 12:43 ` Maxime Ripard 2016-05-25 12:43 ` Maxime Ripard 2016-05-25 12:43 ` Maxime Ripard 2016-05-17 15:56 ` [PATCH 6/6] ARM: dts: sun5i: q8-common: Enable display pipeline and LCD display Chen-Yu Tsai 2016-05-17 15:56 ` Chen-Yu Tsai 2016-05-17 15:56 ` Chen-Yu Tsai 2016-05-25 12:44 ` Maxime Ripard 2016-05-25 12:44 ` Maxime Ripard 2016-05-25 12:44 ` Maxime Ripard 2016-05-18 8:13 ` [PATCH 0/6] ARM: dts: sun5i: q8-common: Enable various peripherals Hans de Goede 2016-05-18 8:13 ` Hans de Goede 2016-05-18 8:13 ` Hans de Goede 2016-05-25 12:40 ` Maxime Ripard 2016-05-25 12:40 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1463500571-28970-6-git-send-email-wens@csie.org \ --to=wens@csie.org \ --cc=airlied@linux.ie \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=hdegoede@redhat.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=maxime.ripard@free-electrons.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.