From: Neil Armstrong <narmstrong@baylibre.com>
To: linux-kernel@vger.kernel.org, p.zabel@pengutronix.de,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
xing.xu@amlogic.com, victor.wan@amlogic.com,
jerry.cao@amlogic.com
Subject: [PATCH 1/3] reset: Add support for the Amlogic Meson GXBB Reset Controller
Date: Fri, 20 May 2016 10:27:53 +0200 [thread overview]
Message-ID: <1463732875-23141-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1463732875-23141-1-git-send-email-narmstrong@baylibre.com>
This patch adds the platform driver for the Amlogic Meson GXBB Reset
Controller.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/reset/Kconfig | 6 ++
drivers/reset/Makefile | 1 +
drivers/reset/reset-meson-gxbb.c | 129 +++++++++++++++++++++++++++++++++++++++
3 files changed, 136 insertions(+)
create mode 100644 drivers/reset/reset-meson-gxbb.c
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index df37212..4ac5c4d 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -12,5 +12,11 @@ menuconfig RESET_CONTROLLER
If unsure, say no.
+config MESON_GXBB_RESET
+ tristate "Amlogic Meson GXBB Reset Driver"
+ depends on (ARCH_MESON && RESET_CONTROLLER)
+ help
+ Build the Amlogic Meson GxBB reset driver.
+
source "drivers/reset/sti/Kconfig"
source "drivers/reset/hisilicon/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index a1fc8ed..5ff83a1 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
+obj-$(CONFIG_MESON_GXBB_RESET) += reset-meson-gxbb.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
diff --git a/drivers/reset/reset-meson-gxbb.c b/drivers/reset/reset-meson-gxbb.c
new file mode 100644
index 0000000..e96691b
--- /dev/null
+++ b/drivers/reset/reset-meson-gxbb.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define REG_COUNT 8
+#define BITS_PER_REG 32
+
+struct meson_gxbb_reset {
+ void __iomem *reg_base;
+ struct reset_controller_dev rcdev;
+};
+
+static int meson_gxbb_reset_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct meson_gxbb_reset *data =
+ container_of(rcdev, struct meson_gxbb_reset, rcdev);
+ unsigned int bank = id / BITS_PER_REG;
+ unsigned int offset = id % BITS_PER_REG;
+ void __iomem *reg_addr = data->reg_base + (bank << 2);
+
+ if (bank >= REG_COUNT)
+ return -EINVAL;
+
+ writel(BIT(offset), reg_addr);
+
+ return 0;
+}
+
+static const struct reset_control_ops meson_gxbb_reset_ops = {
+ .reset = meson_gxbb_reset_reset,
+};
+
+static const struct of_device_id meson_gxbb_reset_dt_ids[] = {
+ { .compatible = "amlogic,meson-gxbb-reset", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_gxbb_reset_dt_ids);
+
+static int meson_gxbb_reset_probe(struct platform_device *pdev)
+{
+ struct meson_gxbb_reset *data;
+ struct resource *res;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(data->reg_base))
+ return PTR_ERR(data->reg_base);
+
+ platform_set_drvdata(pdev, data);
+
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG;
+ data->rcdev.ops = &meson_gxbb_reset_ops;
+ data->rcdev.of_node = pdev->dev.of_node;
+
+ return reset_controller_register(&data->rcdev);
+}
+
+static int meson_gxbb_reset_remove(struct platform_device *pdev)
+{
+ struct meson_gxbb_reset *data = platform_get_drvdata(pdev);
+
+ reset_controller_unregister(&data->rcdev);
+
+ return 0;
+}
+
+static struct platform_driver meson_gxbb_reset_driver = {
+ .probe = meson_gxbb_reset_probe,
+ .remove = meson_gxbb_reset_remove,
+ .driver = {
+ .name = "meson_gxbb_reset",
+ .of_match_table = meson_gxbb_reset_dt_ids,
+ },
+};
+
+module_platform_driver(meson_gxbb_reset_driver);
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] reset: Add support for the Amlogic Meson GXBB Reset Controller
Date: Fri, 20 May 2016 10:27:53 +0200 [thread overview]
Message-ID: <1463732875-23141-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1463732875-23141-1-git-send-email-narmstrong@baylibre.com>
This patch adds the platform driver for the Amlogic Meson GXBB Reset
Controller.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/reset/Kconfig | 6 ++
drivers/reset/Makefile | 1 +
drivers/reset/reset-meson-gxbb.c | 129 +++++++++++++++++++++++++++++++++++++++
3 files changed, 136 insertions(+)
create mode 100644 drivers/reset/reset-meson-gxbb.c
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index df37212..4ac5c4d 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -12,5 +12,11 @@ menuconfig RESET_CONTROLLER
If unsure, say no.
+config MESON_GXBB_RESET
+ tristate "Amlogic Meson GXBB Reset Driver"
+ depends on (ARCH_MESON && RESET_CONTROLLER)
+ help
+ Build the Amlogic Meson GxBB reset driver.
+
source "drivers/reset/sti/Kconfig"
source "drivers/reset/hisilicon/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index a1fc8ed..5ff83a1 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
+obj-$(CONFIG_MESON_GXBB_RESET) += reset-meson-gxbb.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
diff --git a/drivers/reset/reset-meson-gxbb.c b/drivers/reset/reset-meson-gxbb.c
new file mode 100644
index 0000000..e96691b
--- /dev/null
+++ b/drivers/reset/reset-meson-gxbb.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define REG_COUNT 8
+#define BITS_PER_REG 32
+
+struct meson_gxbb_reset {
+ void __iomem *reg_base;
+ struct reset_controller_dev rcdev;
+};
+
+static int meson_gxbb_reset_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct meson_gxbb_reset *data =
+ container_of(rcdev, struct meson_gxbb_reset, rcdev);
+ unsigned int bank = id / BITS_PER_REG;
+ unsigned int offset = id % BITS_PER_REG;
+ void __iomem *reg_addr = data->reg_base + (bank << 2);
+
+ if (bank >= REG_COUNT)
+ return -EINVAL;
+
+ writel(BIT(offset), reg_addr);
+
+ return 0;
+}
+
+static const struct reset_control_ops meson_gxbb_reset_ops = {
+ .reset = meson_gxbb_reset_reset,
+};
+
+static const struct of_device_id meson_gxbb_reset_dt_ids[] = {
+ { .compatible = "amlogic,meson-gxbb-reset", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_gxbb_reset_dt_ids);
+
+static int meson_gxbb_reset_probe(struct platform_device *pdev)
+{
+ struct meson_gxbb_reset *data;
+ struct resource *res;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(data->reg_base))
+ return PTR_ERR(data->reg_base);
+
+ platform_set_drvdata(pdev, data);
+
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG;
+ data->rcdev.ops = &meson_gxbb_reset_ops;
+ data->rcdev.of_node = pdev->dev.of_node;
+
+ return reset_controller_register(&data->rcdev);
+}
+
+static int meson_gxbb_reset_remove(struct platform_device *pdev)
+{
+ struct meson_gxbb_reset *data = platform_get_drvdata(pdev);
+
+ reset_controller_unregister(&data->rcdev);
+
+ return 0;
+}
+
+static struct platform_driver meson_gxbb_reset_driver = {
+ .probe = meson_gxbb_reset_probe,
+ .remove = meson_gxbb_reset_remove,
+ .driver = {
+ .name = "meson_gxbb_reset",
+ .of_match_table = meson_gxbb_reset_dt_ids,
+ },
+};
+
+module_platform_driver(meson_gxbb_reset_driver);
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 1/3] reset: Add support for the Amlogic Meson GXBB Reset Controller
Date: Fri, 20 May 2016 10:27:53 +0200 [thread overview]
Message-ID: <1463732875-23141-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1463732875-23141-1-git-send-email-narmstrong@baylibre.com>
This patch adds the platform driver for the Amlogic Meson GXBB Reset
Controller.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/reset/Kconfig | 6 ++
drivers/reset/Makefile | 1 +
drivers/reset/reset-meson-gxbb.c | 129 +++++++++++++++++++++++++++++++++++++++
3 files changed, 136 insertions(+)
create mode 100644 drivers/reset/reset-meson-gxbb.c
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index df37212..4ac5c4d 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -12,5 +12,11 @@ menuconfig RESET_CONTROLLER
If unsure, say no.
+config MESON_GXBB_RESET
+ tristate "Amlogic Meson GXBB Reset Driver"
+ depends on (ARCH_MESON && RESET_CONTROLLER)
+ help
+ Build the Amlogic Meson GxBB reset driver.
+
source "drivers/reset/sti/Kconfig"
source "drivers/reset/hisilicon/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index a1fc8ed..5ff83a1 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
+obj-$(CONFIG_MESON_GXBB_RESET) += reset-meson-gxbb.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
diff --git a/drivers/reset/reset-meson-gxbb.c b/drivers/reset/reset-meson-gxbb.c
new file mode 100644
index 0000000..e96691b
--- /dev/null
+++ b/drivers/reset/reset-meson-gxbb.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define REG_COUNT 8
+#define BITS_PER_REG 32
+
+struct meson_gxbb_reset {
+ void __iomem *reg_base;
+ struct reset_controller_dev rcdev;
+};
+
+static int meson_gxbb_reset_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct meson_gxbb_reset *data =
+ container_of(rcdev, struct meson_gxbb_reset, rcdev);
+ unsigned int bank = id / BITS_PER_REG;
+ unsigned int offset = id % BITS_PER_REG;
+ void __iomem *reg_addr = data->reg_base + (bank << 2);
+
+ if (bank >= REG_COUNT)
+ return -EINVAL;
+
+ writel(BIT(offset), reg_addr);
+
+ return 0;
+}
+
+static const struct reset_control_ops meson_gxbb_reset_ops = {
+ .reset = meson_gxbb_reset_reset,
+};
+
+static const struct of_device_id meson_gxbb_reset_dt_ids[] = {
+ { .compatible = "amlogic,meson-gxbb-reset", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_gxbb_reset_dt_ids);
+
+static int meson_gxbb_reset_probe(struct platform_device *pdev)
+{
+ struct meson_gxbb_reset *data;
+ struct resource *res;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(data->reg_base))
+ return PTR_ERR(data->reg_base);
+
+ platform_set_drvdata(pdev, data);
+
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG;
+ data->rcdev.ops = &meson_gxbb_reset_ops;
+ data->rcdev.of_node = pdev->dev.of_node;
+
+ return reset_controller_register(&data->rcdev);
+}
+
+static int meson_gxbb_reset_remove(struct platform_device *pdev)
+{
+ struct meson_gxbb_reset *data = platform_get_drvdata(pdev);
+
+ reset_controller_unregister(&data->rcdev);
+
+ return 0;
+}
+
+static struct platform_driver meson_gxbb_reset_driver = {
+ .probe = meson_gxbb_reset_probe,
+ .remove = meson_gxbb_reset_remove,
+ .driver = {
+ .name = "meson_gxbb_reset",
+ .of_match_table = meson_gxbb_reset_dt_ids,
+ },
+};
+
+module_platform_driver(meson_gxbb_reset_driver);
--
2.7.0
next prev parent reply other threads:[~2016-05-20 8:29 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-20 8:27 [PATCH 0/3] Amlogic: GXBB: Add reset controller Neil Armstrong
2016-05-20 8:27 ` Neil Armstrong
2016-05-20 8:27 ` Neil Armstrong
2016-05-20 8:27 ` Neil Armstrong [this message]
2016-05-20 8:27 ` [PATCH 1/3] reset: Add support for the Amlogic Meson GXBB Reset Controller Neil Armstrong
2016-05-20 8:27 ` Neil Armstrong
2016-05-20 9:04 ` Carlo Caione
2016-05-20 9:04 ` Carlo Caione
2016-05-20 9:04 ` Carlo Caione
2016-05-20 9:10 ` Neil Armstrong
2016-05-20 9:10 ` Neil Armstrong
2016-05-20 9:10 ` Neil Armstrong
2016-05-20 9:28 ` Philipp Zabel
2016-05-20 9:28 ` Philipp Zabel
2016-05-20 9:28 ` Philipp Zabel
2016-05-20 10:04 ` Carlo Caione
2016-05-20 10:04 ` Carlo Caione
2016-05-20 10:04 ` Carlo Caione
2016-05-20 12:20 ` Neil Armstrong
2016-05-20 12:20 ` Neil Armstrong
2016-05-20 12:20 ` Neil Armstrong
2016-05-20 12:25 ` Carlo Caione
2016-05-20 12:25 ` Carlo Caione
2016-05-20 12:25 ` Carlo Caione
2016-05-20 9:27 ` Philipp Zabel
2016-05-20 9:27 ` Philipp Zabel
2016-05-20 9:27 ` Philipp Zabel
2016-05-20 12:18 ` Neil Armstrong
2016-05-20 12:18 ` Neil Armstrong
2016-05-20 12:18 ` Neil Armstrong
2016-05-20 8:27 ` [PATCH 2/3] dt-bindings: reset: Add bindings for the " Neil Armstrong
2016-05-20 8:27 ` Neil Armstrong
2016-05-20 8:27 ` Neil Armstrong
2016-05-20 8:27 ` Neil Armstrong
2016-05-20 8:46 ` Carlo Caione
2016-05-20 8:46 ` Carlo Caione
2016-05-20 8:46 ` Carlo Caione
2016-05-20 8:46 ` Carlo Caione
2016-05-20 8:51 ` Neil Armstrong
2016-05-20 8:51 ` Neil Armstrong
2016-05-20 8:51 ` Neil Armstrong
2016-05-20 9:08 ` Carlo Caione
2016-05-20 9:08 ` Carlo Caione
2016-05-20 9:08 ` Carlo Caione
2016-05-20 12:18 ` Neil Armstrong
2016-05-20 12:18 ` Neil Armstrong
2016-05-20 12:18 ` Neil Armstrong
2016-05-23 21:04 ` Rob Herring
2016-05-23 21:04 ` Rob Herring
2016-05-23 21:04 ` Rob Herring
2016-05-20 8:27 ` [PATCH 3/3] ARM64: dts: amlogic: Enable Reset Controller on GXBB-based platforms Neil Armstrong
2016-05-20 8:27 ` Neil Armstrong
2016-05-20 8:27 ` Neil Armstrong
2016-05-20 8:47 ` Carlo Caione
2016-05-20 8:47 ` Carlo Caione
2016-05-20 8:47 ` Carlo Caione
2016-05-20 8:47 ` Carlo Caione
2016-05-20 8:53 ` Neil Armstrong
2016-05-20 8:53 ` Neil Armstrong
2016-05-20 8:53 ` Neil Armstrong
2016-05-20 9:10 ` Carlo Caione
2016-05-20 9:10 ` Carlo Caione
2016-05-20 9:10 ` Carlo Caione
2016-05-20 9:10 ` Carlo Caione
2016-05-20 12:19 ` Neil Armstrong
2016-05-20 12:19 ` Neil Armstrong
2016-05-20 12:19 ` Neil Armstrong
2016-05-20 12:22 ` Carlo Caione
2016-05-20 12:22 ` Carlo Caione
2016-05-20 12:22 ` Carlo Caione
2016-05-20 12:23 ` Neil Armstrong
2016-05-20 12:23 ` Neil Armstrong
2016-05-20 12:23 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463732875-23141-2-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=jerry.cao@amlogic.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=victor.wan@amlogic.com \
--cc=xing.xu@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.