From: Petr Kulhavy <petr@barix.com>
To: lgirdwood@gmail.com, broonie@kernel.org,
ckeepax@opensource.wolfsonmicro.com
Cc: Petr Kulhavy <petr@barix.com>,
alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
plamen@barix.com
Subject: [PATCH v3 1/2] ASoC: wm8985: add register definitions for WM8758
Date: Mon, 23 May 2016 16:11:24 +0200 [thread overview]
Message-ID: <1464012685-1142-2-git-send-email-petr@barix.com> (raw)
In-Reply-To: <1464012685-1142-1-git-send-email-petr@barix.com>
The WM8758 chip is almost identical to WM8985 with the difference that it
doesn't feature the AUX input. This patch adds the register definitions
for WM8758 specific bit fields to the header file.
Signed-off-by: Petr Kulhavy <petr@barix.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
v1: initial
v2: no change
v3: no change
sound/soc/codecs/wm8985.h | 38 ++++++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/sound/soc/codecs/wm8985.h b/sound/soc/codecs/wm8985.h
index 2e71ff507638..41b1048e3c97 100644
--- a/sound/soc/codecs/wm8985.h
+++ b/sound/soc/codecs/wm8985.h
@@ -290,6 +290,9 @@
#define WM8985_GPIO1GPD_MASK 0x0040 /* GPIO1GPD */
#define WM8985_GPIO1GPD_SHIFT 6 /* GPIO1GPD */
#define WM8985_GPIO1GPD_WIDTH 1 /* GPIO1GPD */
+#define WM8758_OPCLKDIV_MASK 0x0030 /* OPCLKDIV - [1:0] */
+#define WM8758_OPCLKDIV_SHIFT 4 /* OPCLKDIV - [1:0] */
+#define WM8758_OPCLKDIV_WIDTH 2 /* OPCLKDIV - [1:0] */
#define WM8985_GPIO1POL 0x0008 /* GPIO1POL */
#define WM8985_GPIO1POL_MASK 0x0008 /* GPIO1POL */
#define WM8985_GPIO1POL_SHIFT 3 /* GPIO1POL */
@@ -301,6 +304,12 @@
/*
* R9 (0x09) - Jack Detect Control 1
*/
+#define WM8758_JD_VMID1_MASK 0x0100 /* JD_VMID1 */
+#define WM8758_JD_VMID1_SHIFT 8 /* JD_VMID1 */
+#define WM8758_JD_VMID1_WIDTH 1 /* JD_VMID1 */
+#define WM8758_JD_VMID0_MASK 0x0080 /* JD_VMID0 */
+#define WM8758_JD_VMID0_SHIFT 7 /* JD_VMID0 */
+#define WM8758_JD_VMID0_WIDTH 1 /* JD_VMID0 */
#define WM8985_JD_EN 0x0040 /* JD_EN */
#define WM8985_JD_EN_MASK 0x0040 /* JD_EN */
#define WM8985_JD_EN_SHIFT 6 /* JD_EN */
@@ -649,6 +658,12 @@
#define WM8985_OUT4_2LNR_MASK 0x0020 /* OUT4_2LNR */
#define WM8985_OUT4_2LNR_SHIFT 5 /* OUT4_2LNR */
#define WM8985_OUT4_2LNR_WIDTH 1 /* OUT4_2LNR */
+#define WM8758_VMIDTOG_MASK 0x0010 /* VMIDTOG */
+#define WM8758_VMIDTOG_SHIFT 4 /* VMIDTOG */
+#define WM8758_VMIDTOG_WIDTH 1 /* VMIDTOG */
+#define WM8758_OUT2DEL_MASK 0x0008 /* OUT2DEL */
+#define WM8758_OUT2DEL_SHIFT 3 /* OUT2DEL */
+#define WM8758_OUT2DEL_WIDTH 1 /* OUT2DEL */
#define WM8985_POBCTRL 0x0004 /* POBCTRL */
#define WM8985_POBCTRL_MASK 0x0004 /* POBCTRL */
#define WM8985_POBCTRL_SHIFT 2 /* POBCTRL */
@@ -684,6 +699,9 @@
#define WM8985_BEEPVOL_MASK 0x000E /* BEEPVOL - [3:1] */
#define WM8985_BEEPVOL_SHIFT 1 /* BEEPVOL - [3:1] */
#define WM8985_BEEPVOL_WIDTH 3 /* BEEPVOL - [3:1] */
+#define WM8758_DELEN2_MASK 0x0004 /* DELEN2 */
+#define WM8758_DELEN2_SHIFT 2 /* DELEN2 */
+#define WM8758_DELEN2_WIDTH 1 /* DELEN2 */
#define WM8985_BEEPEN 0x0001 /* BEEPEN */
#define WM8985_BEEPEN_MASK 0x0001 /* BEEPEN */
#define WM8985_BEEPEN_SHIFT 0 /* BEEPEN */
@@ -790,6 +808,14 @@
/*
* R49 (0x31) - Output ctrl
*/
+#define WM8758_HP_COM 0x0100 /* HP_COM */
+#define WM8758_HP_COM_MASK 0x0100 /* HP_COM */
+#define WM8758_HP_COM_SHIFT 8 /* HP_COM */
+#define WM8758_HP_COM_WIDTH 1 /* HP_COM */
+#define WM8758_LINE_COM 0x0080 /* LINE_COM */
+#define WM8758_LINE_COM_MASK 0x0080 /* LINE_COM */
+#define WM8758_LINE_COM_SHIFT 7 /* LINE_COM */
+#define WM8758_LINE_COM_WIDTH 1 /* LINE_COM */
#define WM8985_DACL2RMIX 0x0040 /* DACL2RMIX */
#define WM8985_DACL2RMIX_MASK 0x0040 /* DACL2RMIX */
#define WM8985_DACL2RMIX_SHIFT 6 /* DACL2RMIX */
@@ -806,6 +832,14 @@
#define WM8985_OUT3BOOST_MASK 0x0008 /* OUT3BOOST */
#define WM8985_OUT3BOOST_SHIFT 3 /* OUT3BOOST */
#define WM8985_OUT3BOOST_WIDTH 1 /* OUT3BOOST */
+#define WM8758_OUT4ENDEL 0x0010 /* OUT4ENDEL */
+#define WM8758_OUT4ENDEL_MASK 0x0010 /* OUT4ENDEL */
+#define WM8758_OUT4ENDEL_SHIFT 4 /* OUT4ENDEL */
+#define WM8758_OUT4ENDEL_WIDTH 1 /* OUT4ENDEL */
+#define WM8758_OUT3ENDEL 0x0008 /* OUT3ENDEL */
+#define WM8758_OUT3ENDEL_MASK 0x0008 /* OUT3ENDEL */
+#define WM8758_OUT3ENDEL_SHIFT 3 /* OUT3ENDEL */
+#define WM8758_OUT3ENDEL_WIDTH 1 /* OUT3ENDEL */
#define WM8985_TSOPCTRL 0x0004 /* TSOPCTRL */
#define WM8985_TSOPCTRL_MASK 0x0004 /* TSOPCTRL */
#define WM8985_TSOPCTRL_SHIFT 2 /* TSOPCTRL */
@@ -1021,6 +1055,10 @@
#define WM8985_HALFIPBIAS_MASK 0x0080 /* HALFIPBIAS */
#define WM8985_HALFIPBIAS_SHIFT 7 /* HALFIPBIAS */
#define WM8985_HALFIPBIAS_WIDTH 1 /* HALFIPBIAS */
+#define WM8758_HALFIPBIAS 0x0040 /* HALFI_IPGA */
+#define WM8758_HALFI_IPGA_MASK 0x0040 /* HALFI_IPGA */
+#define WM8758_HALFI_IPGA_SHIFT 6 /* HALFI_IPGA */
+#define WM8758_HALFI_IPGA_WIDTH 1 /* HALFI_IPGA */
#define WM8985_VBBIASTST_MASK 0x0060 /* VBBIASTST - [6:5] */
#define WM8985_VBBIASTST_SHIFT 5 /* VBBIASTST - [6:5] */
#define WM8985_VBBIASTST_WIDTH 2 /* VBBIASTST - [6:5] */
--
1.9.1
next prev parent reply other threads:[~2016-05-23 14:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-23 14:11 [PATCH v3 0/2] ASoC: wm8985: add support for WM8758 Petr Kulhavy
2016-05-23 14:11 ` Petr Kulhavy [this message]
2016-05-23 14:11 ` [PATCH v3 2/2] " Petr Kulhavy
2016-05-23 14:55 ` Charles Keepax
2016-05-24 7:24 ` Petr Kulhavy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464012685-1142-2-git-send-email-petr@barix.com \
--to=petr@barix.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=lgirdwood@gmail.com \
--cc=patches@opensource.wolfsonmicro.com \
--cc=plamen@barix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.