From: Nishanth Menon <nm@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-omap@vger.kernel.org>, Nishanth Menon <nm@ti.com>
Subject: [PATCH 2/3] ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
Date: Tue, 24 May 2016 08:35:39 -0500 [thread overview]
Message-ID: <1464096940-27145-3-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1464096940-27145-1-git-send-email-nm@ti.com>
As per the latest revision F of public TRM for DRA7/AM57xx SoCs
SPRUHZ6F[1] (April 2016), with the exception of MPU power domain (and
CPUx sub power domains), all other power domains can either operate
in "ON" mode OR in some cases, "OFF" mode. For these power states,
the logic retention state is basically ignored by PRCM and does not
require to be programmed.
[1] http://www.ti.com/lit/pdf/spruhz6
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/mach-omap2/powerdomains7xx_data.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
index 8ea447ed4dc4..88107b449710 100644
--- a/arch/arm/mach-omap2/powerdomains7xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -36,7 +36,6 @@ static struct powerdomain iva_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_IVA_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 4,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* hwa_mem */
@@ -76,7 +75,6 @@ static struct powerdomain ipu_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_IPU_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* aessmem */
@@ -95,7 +93,6 @@ static struct powerdomain dss_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_DSS_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* dss_mem */
@@ -112,7 +109,6 @@ static struct powerdomain l4per_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_L4PER_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* nonretained_bank */
@@ -161,7 +157,6 @@ static struct powerdomain core_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_CORE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
.banks = 5,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* core_nret_bank */
@@ -226,7 +221,6 @@ static struct powerdomain vpe_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_VPE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* vpe_bank */
@@ -261,7 +255,6 @@ static struct powerdomain l3init_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_L3INIT_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
.banks = 3,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* gmac_bank */
--
2.8.0
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
Nishanth Menon <nm@ti.com>
Subject: [PATCH 2/3] ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
Date: Tue, 24 May 2016 08:35:39 -0500 [thread overview]
Message-ID: <1464096940-27145-3-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1464096940-27145-1-git-send-email-nm@ti.com>
As per the latest revision F of public TRM for DRA7/AM57xx SoCs
SPRUHZ6F[1] (April 2016), with the exception of MPU power domain (and
CPUx sub power domains), all other power domains can either operate
in "ON" mode OR in some cases, "OFF" mode. For these power states,
the logic retention state is basically ignored by PRCM and does not
require to be programmed.
[1] http://www.ti.com/lit/pdf/spruhz6
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/mach-omap2/powerdomains7xx_data.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
index 8ea447ed4dc4..88107b449710 100644
--- a/arch/arm/mach-omap2/powerdomains7xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -36,7 +36,6 @@ static struct powerdomain iva_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_IVA_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 4,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* hwa_mem */
@@ -76,7 +75,6 @@ static struct powerdomain ipu_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_IPU_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* aessmem */
@@ -95,7 +93,6 @@ static struct powerdomain dss_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_DSS_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* dss_mem */
@@ -112,7 +109,6 @@ static struct powerdomain l4per_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_L4PER_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* nonretained_bank */
@@ -161,7 +157,6 @@ static struct powerdomain core_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_CORE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
.banks = 5,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* core_nret_bank */
@@ -226,7 +221,6 @@ static struct powerdomain vpe_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_VPE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* vpe_bank */
@@ -261,7 +255,6 @@ static struct powerdomain l3init_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_L3INIT_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
.banks = 3,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* gmac_bank */
--
2.8.0
WARNING: multiple messages have this Message-ID (diff)
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
Date: Tue, 24 May 2016 08:35:39 -0500 [thread overview]
Message-ID: <1464096940-27145-3-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1464096940-27145-1-git-send-email-nm@ti.com>
As per the latest revision F of public TRM for DRA7/AM57xx SoCs
SPRUHZ6F[1] (April 2016), with the exception of MPU power domain (and
CPUx sub power domains), all other power domains can either operate
in "ON" mode OR in some cases, "OFF" mode. For these power states,
the logic retention state is basically ignored by PRCM and does not
require to be programmed.
[1] http://www.ti.com/lit/pdf/spruhz6
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/mach-omap2/powerdomains7xx_data.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
index 8ea447ed4dc4..88107b449710 100644
--- a/arch/arm/mach-omap2/powerdomains7xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -36,7 +36,6 @@ static struct powerdomain iva_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_IVA_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 4,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* hwa_mem */
@@ -76,7 +75,6 @@ static struct powerdomain ipu_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_IPU_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* aessmem */
@@ -95,7 +93,6 @@ static struct powerdomain dss_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_DSS_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* dss_mem */
@@ -112,7 +109,6 @@ static struct powerdomain l4per_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_L4PER_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* nonretained_bank */
@@ -161,7 +157,6 @@ static struct powerdomain core_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_CORE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
.banks = 5,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* core_nret_bank */
@@ -226,7 +221,6 @@ static struct powerdomain vpe_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_VPE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* vpe_bank */
@@ -261,7 +255,6 @@ static struct powerdomain l3init_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_L3INIT_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
.banks = 3,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* gmac_bank */
--
2.8.0
next prev parent reply other threads:[~2016-05-24 13:36 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-24 13:35 [PATCH 0/3] ARM: OMAP: DRA7: Update to latest TRM and cleanup Nishanth Menon
2016-05-24 13:35 ` Nishanth Menon
2016-05-24 13:35 ` Nishanth Menon
2016-05-24 13:35 ` [PATCH 1/3] ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON Nishanth Menon
2016-05-24 13:35 ` Nishanth Menon
2016-05-24 13:35 ` Nishanth Menon
2016-05-24 13:35 ` Nishanth Menon [this message]
2016-05-24 13:35 ` [PATCH 2/3] ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret Nishanth Menon
2016-05-24 13:35 ` Nishanth Menon
2016-05-24 13:35 ` [PATCH 3/3] ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret Nishanth Menon
2016-05-24 13:35 ` Nishanth Menon
2016-05-24 13:35 ` Nishanth Menon
2016-06-10 9:34 ` [PATCH 0/3] ARM: OMAP: DRA7: Update to latest TRM and cleanup Tony Lindgren
2016-06-10 9:34 ` Tony Lindgren
2016-06-10 14:18 ` Nishanth Menon
2016-06-10 14:18 ` Nishanth Menon
2016-06-10 14:18 ` Nishanth Menon
2016-06-13 8:42 ` Tony Lindgren
2016-06-13 8:42 ` Tony Lindgren
2016-06-13 8:42 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464096940-27145-3-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.