From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Cc: rogerq@ti.com, Peter Chen <peter.chen@freescale.com>,
"Ivan T. Ivanov" <iivanov@mm-sol.com>,
balbi@ti.com, kishon@ti.com,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: [RFC v4 3/7] extcon: Add raw VBUS and ID cable states
Date: Wed, 08 Jun 2016 15:48:02 +0200 [thread overview]
Message-ID: <1465393686-16644-4-git-send-email-k.kozlowski@samsung.com> (raw)
In-Reply-To: <1465393686-16644-1-git-send-email-k.kozlowski@samsung.com>
The USB controller driver might want to receive the changes for VBUS and
ID pins so it could properly handle USB OTG. Add new cable states for
that purpose.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
Previous discussion:
http://lkml.kernel.org/g/<1427980385-21285-3-git-send-email-r.baldyga@samsung.com>
---
drivers/extcon/extcon.c | 3 +++
include/linux/extcon.h | 8 +++++++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 21a123cadf78..aa02d94e8a78 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -74,6 +74,9 @@ static const char *extcon_name[] = {
[EXTCON_JIG] = "JIG",
[EXTCON_MECHANICAL] = "MECHANICAL",
+ [EXTCON_USB_ID] = "USB-ID",
+ [EXTCON_USB_VBUS] = "USB-VBUS",
+
NULL,
};
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 7abf674c388c..126ae41b84fd 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -66,7 +66,13 @@
#define EXTCON_JIG 61
#define EXTCON_MECHANICAL 62
-#define EXTCON_NUM 63
+/* Raw status, useful for USB controllers */
+#define EXTCON_USB_ID 63
+#define EXTCON_USB_VBUS 64
+
+#define EXTCON_NUM 65
+
+
struct extcon_cable;
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
balbi@ti.com, kishon@ti.com,
Peter Chen <peter.chen@freescale.com>,
"Ivan T. Ivanov" <iivanov@mm-sol.com>,
rogerq@ti.com
Subject: [RFC v4 3/7] extcon: Add raw VBUS and ID cable states
Date: Wed, 08 Jun 2016 15:48:02 +0200 [thread overview]
Message-ID: <1465393686-16644-4-git-send-email-k.kozlowski@samsung.com> (raw)
In-Reply-To: <1465393686-16644-1-git-send-email-k.kozlowski@samsung.com>
The USB controller driver might want to receive the changes for VBUS and
ID pins so it could properly handle USB OTG. Add new cable states for
that purpose.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
Previous discussion:
http://lkml.kernel.org/g/<1427980385-21285-3-git-send-email-r.baldyga@samsung.com>
---
drivers/extcon/extcon.c | 3 +++
include/linux/extcon.h | 8 +++++++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 21a123cadf78..aa02d94e8a78 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -74,6 +74,9 @@ static const char *extcon_name[] = {
[EXTCON_JIG] = "JIG",
[EXTCON_MECHANICAL] = "MECHANICAL",
+ [EXTCON_USB_ID] = "USB-ID",
+ [EXTCON_USB_VBUS] = "USB-VBUS",
+
NULL,
};
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 7abf674c388c..126ae41b84fd 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -66,7 +66,13 @@
#define EXTCON_JIG 61
#define EXTCON_MECHANICAL 62
-#define EXTCON_NUM 63
+/* Raw status, useful for USB controllers */
+#define EXTCON_USB_ID 63
+#define EXTCON_USB_VBUS 64
+
+#define EXTCON_NUM 65
+
+
struct extcon_cable;
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski@samsung.com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC v4 3/7] extcon: Add raw VBUS and ID cable states
Date: Wed, 08 Jun 2016 15:48:02 +0200 [thread overview]
Message-ID: <1465393686-16644-4-git-send-email-k.kozlowski@samsung.com> (raw)
In-Reply-To: <1465393686-16644-1-git-send-email-k.kozlowski@samsung.com>
The USB controller driver might want to receive the changes for VBUS and
ID pins so it could properly handle USB OTG. Add new cable states for
that purpose.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
Previous discussion:
http://lkml.kernel.org/g/<1427980385-21285-3-git-send-email-r.baldyga@samsung.com>
---
drivers/extcon/extcon.c | 3 +++
include/linux/extcon.h | 8 +++++++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 21a123cadf78..aa02d94e8a78 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -74,6 +74,9 @@ static const char *extcon_name[] = {
[EXTCON_JIG] = "JIG",
[EXTCON_MECHANICAL] = "MECHANICAL",
+ [EXTCON_USB_ID] = "USB-ID",
+ [EXTCON_USB_VBUS] = "USB-VBUS",
+
NULL,
};
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 7abf674c388c..126ae41b84fd 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -66,7 +66,13 @@
#define EXTCON_JIG 61
#define EXTCON_MECHANICAL 62
-#define EXTCON_NUM 63
+/* Raw status, useful for USB controllers */
+#define EXTCON_USB_ID 63
+#define EXTCON_USB_VBUS 64
+
+#define EXTCON_NUM 65
+
+
struct extcon_cable;
--
1.9.1
next prev parent reply other threads:[~2016-06-08 13:49 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20160608134820epcas1p4ee75a89888f2ae2adb733124a330bd2c@epcas1p4.samsung.com>
2016-06-08 13:47 ` [RFC v4 0/7] extcon: usb-gpio: fixes and improvements Krzysztof Kozlowski
2016-06-08 13:47 ` Krzysztof Kozlowski
2016-06-08 13:48 ` [RFC v4 1/7] Documentation: extcon: usb-gpio: update usb-gpio binding description Krzysztof Kozlowski
2016-06-08 13:48 ` Krzysztof Kozlowski
2016-06-10 14:00 ` Rob Herring
2016-06-10 14:00 ` Rob Herring
2016-06-10 14:00 ` Rob Herring
2016-06-08 13:48 ` [RFC v4 2/7] Revert "extcon: usb-gpio: switch to use pm wakeirq apis" Krzysztof Kozlowski
2016-06-08 13:48 ` Krzysztof Kozlowski
2016-06-09 8:00 ` Roger Quadros
2016-06-09 8:00 ` Roger Quadros
2016-06-09 8:00 ` Roger Quadros
2016-06-09 8:10 ` Krzysztof Kozlowski
2016-06-09 8:10 ` Krzysztof Kozlowski
2016-06-09 8:20 ` Roger Quadros
2016-06-09 8:20 ` Roger Quadros
2016-06-09 8:20 ` Roger Quadros
2016-06-08 13:48 ` Krzysztof Kozlowski [this message]
2016-06-08 13:48 ` [RFC v4 3/7] extcon: Add raw VBUS and ID cable states Krzysztof Kozlowski
2016-06-08 13:48 ` Krzysztof Kozlowski
2016-06-08 13:48 ` [RFC v4 4/7] extcon: usb-gpio: Add support for VBUS detection Krzysztof Kozlowski
2016-06-08 13:48 ` Krzysztof Kozlowski
2016-06-08 13:48 ` Krzysztof Kozlowski
2016-06-09 8:38 ` Roger Quadros
2016-06-09 8:38 ` Roger Quadros
2016-06-09 8:38 ` Roger Quadros
2016-06-09 8:41 ` Roger Quadros
2016-06-09 8:41 ` Roger Quadros
2016-06-09 8:41 ` Roger Quadros
2016-06-09 8:43 ` Krzysztof Kozlowski
2016-06-09 8:43 ` Krzysztof Kozlowski
2016-06-09 12:13 ` Roger Quadros
2016-06-09 12:13 ` Roger Quadros
2016-06-09 12:13 ` Roger Quadros
2016-06-08 13:48 ` [RFC v4 5/7] extcon: usb-gpio: make debounce value configurable in devicetree Krzysztof Kozlowski
2016-06-08 13:48 ` Krzysztof Kozlowski
2016-06-08 13:48 ` [RFC v4 6/7] ARM: exynos_defconfig: Enable EXTCON_USB_GPIO for Odroid XU3 USB OTG Krzysztof Kozlowski
2016-06-08 13:48 ` Krzysztof Kozlowski
2016-06-08 13:48 ` [RFC v4 7/7] ARM: dts: exynos: Add extcon-usb-gpio node for Odroid XU3 Krzysztof Kozlowski
2016-06-08 13:48 ` Krzysztof Kozlowski
2016-06-09 8:35 ` [RFC v4 0/7] extcon: usb-gpio: fixes and improvements Chanwoo Choi
2016-06-09 8:35 ` Chanwoo Choi
2016-06-09 8:39 ` Krzysztof Kozlowski
2016-06-09 8:39 ` Krzysztof Kozlowski
2016-06-09 9:32 ` Chanwoo Choi
2016-06-09 9:32 ` Chanwoo Choi
2016-06-09 9:32 ` Chanwoo Choi
2016-08-01 12:23 ` Roger Quadros
2016-08-01 12:23 ` Roger Quadros
2016-08-01 12:23 ` Roger Quadros
2016-08-01 12:57 ` Chanwoo Choi
2016-08-01 12:57 ` Chanwoo Choi
2016-06-26 16:39 ` Tobias Jakobi
2016-06-26 16:39 ` Tobias Jakobi
2016-06-27 5:22 ` Krzysztof Kozlowski
2016-06-27 5:22 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465393686-16644-4-git-send-email-k.kozlowski@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=balbi@ti.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=iivanov@mm-sol.com \
--cc=kgene@kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mark.rutland@arm.com \
--cc=myungjoo.ham@samsung.com \
--cc=peter.chen@freescale.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.