From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Sebastian Reichel <sre@kernel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Hans de Goede <hdegoede@redhat.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Heiko Stuebner <heiko@sntech.de>,
linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org,
linux-usb@vger.kernel.org, linux-fbdev@vger.kernel.org,
hzpeterchen@gmail.com
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: [RFC v4 05/14] power: pwrseq: Enable COMPILE_TEST for drivers
Date: Thu, 09 Jun 2016 11:44:22 +0200 [thread overview]
Message-ID: <1465465471-28740-6-git-send-email-k.kozlowski@samsung.com> (raw)
In-Reply-To: <1465465471-28740-1-git-send-email-k.kozlowski@samsung.com>
Allow build testing for power sequence drivers.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
drivers/power/pwrseq/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig
index 7ecd66ab61f3..c7e9271fd94f 100644
--- a/drivers/power/pwrseq/Kconfig
+++ b/drivers/power/pwrseq/Kconfig
@@ -10,7 +10,7 @@ if POWER_SEQ
config POWER_SEQ_EMMC
tristate "HW reset support for eMMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects Hardware reset support aka pwrseq-emmc for eMMC
devices. By default this option is set to y.
@@ -21,7 +21,7 @@ config POWER_SEQ_EMMC
config POWER_SEQ_SIMPLE
tristate "Simple HW reset support for MMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects simple hardware reset support aka pwrseq-simple for MMC
devices. By default this option is set to y.
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Sebastian Reichel <sre@kernel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Hans de Goede <hdegoede@redhat.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Heiko Stuebner <heiko@sntech.de>,
linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org,
linux-usb@vger.
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: [RFC v4 05/14] power: pwrseq: Enable COMPILE_TEST for drivers
Date: Thu, 09 Jun 2016 11:44:22 +0200 [thread overview]
Message-ID: <1465465471-28740-6-git-send-email-k.kozlowski@samsung.com> (raw)
In-Reply-To: <1465465471-28740-1-git-send-email-k.kozlowski@samsung.com>
Allow build testing for power sequence drivers.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
drivers/power/pwrseq/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig
index 7ecd66ab61f3..c7e9271fd94f 100644
--- a/drivers/power/pwrseq/Kconfig
+++ b/drivers/power/pwrseq/Kconfig
@@ -10,7 +10,7 @@ if POWER_SEQ
config POWER_SEQ_EMMC
tristate "HW reset support for eMMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects Hardware reset support aka pwrseq-emmc for eMMC
devices. By default this option is set to y.
@@ -21,7 +21,7 @@ config POWER_SEQ_EMMC
config POWER_SEQ_SIMPLE
tristate "Simple HW reset support for MMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects simple hardware reset support aka pwrseq-simple for MMC
devices. By default this option is set to y.
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC v4 05/14] power: pwrseq: Enable COMPILE_TEST for drivers
Date: Thu, 09 Jun 2016 09:44:22 +0000 [thread overview]
Message-ID: <1465465471-28740-6-git-send-email-k.kozlowski@samsung.com> (raw)
In-Reply-To: <1465465471-28740-1-git-send-email-k.kozlowski@samsung.com>
Allow build testing for power sequence drivers.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
drivers/power/pwrseq/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig
index 7ecd66ab61f3..c7e9271fd94f 100644
--- a/drivers/power/pwrseq/Kconfig
+++ b/drivers/power/pwrseq/Kconfig
@@ -10,7 +10,7 @@ if POWER_SEQ
config POWER_SEQ_EMMC
tristate "HW reset support for eMMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects Hardware reset support aka pwrseq-emmc for eMMC
devices. By default this option is set to y.
@@ -21,7 +21,7 @@ config POWER_SEQ_EMMC
config POWER_SEQ_SIMPLE
tristate "Simple HW reset support for MMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects simple hardware reset support aka pwrseq-simple for MMC
devices. By default this option is set to y.
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski@samsung.com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC v4 05/14] power: pwrseq: Enable COMPILE_TEST for drivers
Date: Thu, 09 Jun 2016 11:44:22 +0200 [thread overview]
Message-ID: <1465465471-28740-6-git-send-email-k.kozlowski@samsung.com> (raw)
In-Reply-To: <1465465471-28740-1-git-send-email-k.kozlowski@samsung.com>
Allow build testing for power sequence drivers.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
drivers/power/pwrseq/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig
index 7ecd66ab61f3..c7e9271fd94f 100644
--- a/drivers/power/pwrseq/Kconfig
+++ b/drivers/power/pwrseq/Kconfig
@@ -10,7 +10,7 @@ if POWER_SEQ
config POWER_SEQ_EMMC
tristate "HW reset support for eMMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects Hardware reset support aka pwrseq-emmc for eMMC
devices. By default this option is set to y.
@@ -21,7 +21,7 @@ config POWER_SEQ_EMMC
config POWER_SEQ_SIMPLE
tristate "Simple HW reset support for MMC"
default y
- depends on OF
+ depends on OF || COMPILE_TEST
help
This selects simple hardware reset support aka pwrseq-simple for MMC
devices. By default this option is set to y.
--
1.9.1
next prev parent reply other threads:[~2016-06-09 9:48 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-09 9:44 [RFC v4 00/14] usb/mmc/power: Generic power sequence (and fix USB/LAN when TFTP booting) Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` [RFC v4 01/14] regulator: of: Add helper for getting all supplies Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 10:29 ` Mark Brown
2016-06-09 10:29 ` Mark Brown
2016-06-09 10:29 ` Mark Brown
2016-06-09 10:29 ` Mark Brown
2016-06-09 11:42 ` Krzysztof Kozlowski
2016-06-09 11:42 ` Krzysztof Kozlowski
2016-06-09 11:42 ` Krzysztof Kozlowski
2016-06-09 11:42 ` Krzysztof Kozlowski
2016-06-10 17:30 ` Rob Herring
2016-06-10 17:30 ` Rob Herring
2016-06-10 17:30 ` Rob Herring
2016-06-10 17:30 ` Rob Herring
2016-06-10 18:49 ` Heiko Stübner
2016-06-10 18:49 ` Heiko Stübner
2016-06-10 18:49 ` Heiko Stübner
2016-06-10 18:49 ` Heiko Stübner
2016-06-12 7:29 ` Peter Chen
2016-06-12 7:29 ` Peter Chen
2016-06-12 7:29 ` Peter Chen
2016-06-12 7:29 ` Peter Chen
2016-06-13 3:44 ` Peter Chen
2016-06-13 3:44 ` Peter Chen
2016-06-13 3:44 ` Peter Chen
2016-06-13 3:44 ` Peter Chen
2016-06-09 12:50 ` Rafael J. Wysocki
2016-06-09 12:50 ` Rafael J. Wysocki
2016-06-09 12:50 ` Rafael J. Wysocki
2016-06-09 12:50 ` Rafael J. Wysocki
2016-06-09 15:57 ` Mark Brown
2016-06-09 15:57 ` Mark Brown
2016-06-09 15:57 ` Mark Brown
2016-06-09 15:57 ` Mark Brown
2016-06-09 9:44 ` [RFC v4 02/14] simplefb: Use new devm_of_regulator_all_get helper and bulk API Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` [RFC v4 03/14] power/mmc: Move pwrseq drivers to power/pwrseq Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` [RFC v4 04/14] MAINTAINERS: Retain Ulf Hansson as the same maintainer of pwrseq Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski [this message]
2016-06-09 9:44 ` [RFC v4 05/14] power: pwrseq: Enable COMPILE_TEST for drivers Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` [RFC v4 06/14] power: pwrseq: Remove mmc prefix from mmc_pwrseq Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` [RFC v4 07/14] power: pwrseq: Generalize mmc_pwrseq operations by removing mmc prefix Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` [RFC v4 08/14] power: pwrseq: simple: Add support for regulators and generic property Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` [RFC v4 09/14] power: pwrseq: Add support for USB hubs with external power Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` [RFC v4 10/14] usb: hub: Handle deferred probe Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` [RFC v4 11/14] EXAMPLE CODE: usb: port: Parse pwrseq phandle from Device Tree Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` [RFC v4 12/14] EXAMPLE CODE: usb: hub: Power sequence the ports on activation Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` [RFC v4 13/14] ARM: dts: exynos: Switch the buck8 to GPIO mode on Odroid U3 Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` [RFC v4 14/14] ARM: dts: exynos: Fix LAN and HUB after bootloader initialization " Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
2016-06-09 9:44 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465465471-28740-6-git-send-email-k.kozlowski@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=broonie@kernel.org \
--cc=dbaryshkov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=galak@codeaurora.org \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=heiko@sntech.de \
--cc=hzpeterchen@gmail.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=plagnioj@jcrosoft.com \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
--cc=tomi.valkeinen@ti.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.