All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ed Swierk <eswierk@skyportsystems.com>
To: tpmdd-devel@lists.sourceforge.net
Cc: eswierk@skyportsystems.com, stefanb@us.ibm.com,
	jarkko.sakkinen@linux.intel.com, linux-kernel@vger.kernel.org,
	linux-security-module@vger.kernel.org,
	jgunthorpe@obsidianresearch.com
Subject: [PATCH v6 4/5] tpm: Allow TPM chip drivers to override reported command durations
Date: Fri, 10 Jun 2016 18:55:06 -0700	[thread overview]
Message-ID: <1465610107-87762-5-git-send-email-eswierk@skyportsystems.com> (raw)
In-Reply-To: <1465610107-87762-1-git-send-email-eswierk@skyportsystems.com>

Some TPM chips report bogus command durations in their capabilities,
just as others report incorrect timeouts. Rework tpm_get_timeouts() to
allow chip drivers to override either via a single callback. Also
clean up handling of TPMs that report milliseconds instead of
microseconds.

Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
---
 drivers/char/tpm/tpm-interface.c | 139 +++++++++++++++++++++------------------
 drivers/char/tpm/tpm_tis.c       |  35 +++-------
 include/linux/tpm.h              |   3 +-
 3 files changed, 85 insertions(+), 92 deletions(-)

diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index 4d1f62c..a14adfd 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -550,83 +550,94 @@ static int tpm_get_cap_prop(struct tpm_chip *chip, __be32 type, int size,
 
 int tpm_get_timeouts(struct tpm_chip *chip)
 {
-	struct tpm_cmd_t tpm_cmd;
-	unsigned long new_timeout[4];
-	unsigned long old_timeout[4];
-	struct duration_t *duration_cap;
-	ssize_t rc;
+	cap_t cap1, cap2;
+	int rc;
+	struct tpm_vendor_specific orig_vendor;
 
-	rc = tpm_get_cap_prop(chip, TPM_CAP_PROP_TIS_TIMEOUT, 4,
-			      &tpm_cmd.params.getcap_out.cap, "timeouts");
+	rc = tpm_get_cap_prop(chip, TPM_CAP_PROP_TIS_TIMEOUT, 4, &cap1,
+			      "timeouts");
 	if (rc)
 		return rc;
 
-	old_timeout[0] = be32_to_cpu(tpm_cmd.params.getcap_out.cap.timeout.a);
-	old_timeout[1] = be32_to_cpu(tpm_cmd.params.getcap_out.cap.timeout.b);
-	old_timeout[2] = be32_to_cpu(tpm_cmd.params.getcap_out.cap.timeout.c);
-	old_timeout[3] = be32_to_cpu(tpm_cmd.params.getcap_out.cap.timeout.d);
-	memcpy(new_timeout, old_timeout, sizeof(new_timeout));
+	rc = tpm_get_cap_prop(chip, TPM_CAP_PROP_TIS_DURATION, 3, &cap2,
+			       "durations");
+	if (rc)
+		return rc;
 
-	/*
-	 * Provide ability for vendor overrides of timeout values in case
-	 * of misreporting.
-	 */
-	if (chip->ops->update_timeouts != NULL)
-		chip->vendor.timeout_adjusted =
-			chip->ops->update_timeouts(chip, new_timeout);
+	be32_to_cpus(&cap1.timeout.a);
+	be32_to_cpus(&cap1.timeout.b);
+	be32_to_cpus(&cap1.timeout.c);
+	be32_to_cpus(&cap1.timeout.d);
+	chip->vendor.timeout_a = usecs_to_jiffies(cap1.timeout.a);
+	chip->vendor.timeout_b = usecs_to_jiffies(cap1.timeout.b);
+	chip->vendor.timeout_c = usecs_to_jiffies(cap1.timeout.c);
+	chip->vendor.timeout_d = usecs_to_jiffies(cap1.timeout.d);
 
-	if (!chip->vendor.timeout_adjusted) {
-		/* Don't overwrite default if value is 0 */
-		if (new_timeout[0] != 0 && new_timeout[0] < 1000) {
-			int i;
-
-			/* timeouts in msec rather usec */
-			for (i = 0; i != ARRAY_SIZE(new_timeout); i++)
-				new_timeout[i] *= 1000;
-			chip->vendor.timeout_adjusted = true;
-		}
+	/* Some TPMs report timeouts in milliseconds rather than
+	   microseconds. Use a value between 1 and 1000 as an
+	   indication that this is the case. */
+	if (cap1.timeout.a > 0 && cap1.timeout.a < 1000) {
+		chip->vendor.timeout_a = msecs_to_jiffies(cap1.timeout.a);
+		chip->vendor.timeout_b = msecs_to_jiffies(cap1.timeout.b);
+		chip->vendor.timeout_c = msecs_to_jiffies(cap1.timeout.c);
+		chip->vendor.timeout_d = msecs_to_jiffies(cap1.timeout.d);
+		chip->vendor.timeout_adjusted = true;
 	}
 
-	/* Report adjusted timeouts */
+	be32_to_cpus(&cap2.duration.tpm_short);
+	be32_to_cpus(&cap2.duration.tpm_medium);
+	be32_to_cpus(&cap2.duration.tpm_long);
+	chip->vendor.duration[TPM_SHORT] =
+		usecs_to_jiffies(cap2.duration.tpm_short);
+	chip->vendor.duration[TPM_MEDIUM] =
+		usecs_to_jiffies(cap2.duration.tpm_medium);
+	chip->vendor.duration[TPM_LONG] =
+		usecs_to_jiffies(cap2.duration.tpm_long);
+
+	memcpy(&orig_vendor, &chip->vendor, sizeof(orig_vendor));
+
+	/* Interpret duration values between 1 and 10000 as
+	   milliseconds to deal with TPMs like the Broadcom BCM0102 in
+	   the Dell Latitude D820. */
+	if (cap2.duration.tpm_short > 0 && cap2.duration.tpm_short < 10000) {
+		chip->vendor.duration[TPM_SHORT] =
+			msecs_to_jiffies(cap2.duration.tpm_short);
+		chip->vendor.duration[TPM_MEDIUM] =
+			msecs_to_jiffies(cap2.duration.tpm_medium);
+		chip->vendor.duration[TPM_LONG] =
+			msecs_to_jiffies(cap2.duration.tpm_long);
+		chip->vendor.duration_adjusted = true;
+	}
+
+	if (chip->ops->update_timeouts != NULL)
+		chip->ops->update_timeouts(chip);
+
 	if (chip->vendor.timeout_adjusted) {
 		dev_info(chip->pdev,
-			 HW_ERR "Adjusting reported timeouts: A %lu->%luus B %lu->%luus C %lu->%luus D %lu->%luus\n",
-			 old_timeout[0], new_timeout[0],
-			 old_timeout[1], new_timeout[1],
-			 old_timeout[2], new_timeout[2],
-			 old_timeout[3], new_timeout[3]);
+			 HW_ERR "Adjusted timeouts: A %u->%uus B %u->%uus"
+			 " C %u->%uus D %u->%uus\n",
+			 jiffies_to_usecs(orig_vendor.timeout_a),
+			 jiffies_to_usecs(chip->vendor.timeout_a),
+			 jiffies_to_usecs(orig_vendor.timeout_b),
+			 jiffies_to_usecs(chip->vendor.timeout_b),
+			 jiffies_to_usecs(orig_vendor.timeout_c),
+			 jiffies_to_usecs(chip->vendor.timeout_c),
+			 jiffies_to_usecs(orig_vendor.timeout_d),
+			 jiffies_to_usecs(chip->vendor.timeout_d));
 	}
 
-	chip->vendor.timeout_a = usecs_to_jiffies(new_timeout[0]);
-	chip->vendor.timeout_b = usecs_to_jiffies(new_timeout[1]);
-	chip->vendor.timeout_c = usecs_to_jiffies(new_timeout[2]);
-	chip->vendor.timeout_d = usecs_to_jiffies(new_timeout[3]);
-
-	rc = tpm_get_cap_prop(chip, TPM_CAP_PROP_TIS_DURATION, 3,
-			      &tpm_cmd.params.getcap_out.cap, "durations");
-	if (rc)
-		return rc;
-
-	duration_cap = &tpm_cmd.params.getcap_out.cap.duration;
-	chip->vendor.duration[TPM_SHORT] =
-	    usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_short));
-	chip->vendor.duration[TPM_MEDIUM] =
-	    usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_medium));
-	chip->vendor.duration[TPM_LONG] =
-	    usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_long));
-
-	/* The Broadcom BCM0102 chipset in a Dell Latitude D820 gets the above
-	 * value wrong and apparently reports msecs rather than usecs. So we
-	 * fix up the resulting too-small TPM_SHORT value to make things work.
-	 * We also scale the TPM_MEDIUM and -_LONG values by 1000.
-	 */
-	if (chip->vendor.duration[TPM_SHORT] < (HZ / 100)) {
-		chip->vendor.duration[TPM_SHORT] = HZ;
-		chip->vendor.duration[TPM_MEDIUM] *= 1000;
-		chip->vendor.duration[TPM_LONG] *= 1000;
-		chip->vendor.duration_adjusted = true;
-		dev_info(chip->pdev, "Adjusting TPM timeout parameters.");
+	if (chip->vendor.duration_adjusted) {
+		dev_info(chip->pdev,
+			 HW_ERR "Adjusted durations: short %u->%uus"
+			 " medium %u->%uus long %u->%uus\n",
+			 jiffies_to_usecs(orig_vendor.duration[TPM_SHORT]),
+			 jiffies_to_usecs(chip->vendor.duration[TPM_SHORT]),
+			 jiffies_to_usecs(orig_vendor.duration[TPM_MEDIUM]),
+			 jiffies_to_usecs(chip->vendor.duration[TPM_MEDIUM]),
+			 jiffies_to_usecs(orig_vendor.duration[TPM_LONG]),
+			 jiffies_to_usecs(chip->vendor.duration[TPM_LONG]));
 	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(tpm_get_timeouts);
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 088fa86..caf7278 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -475,34 +475,17 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
 	return rc;
 }
 
-struct tis_vendor_timeout_override {
-	u32 did_vid;
-	unsigned long timeout_us[4];
-};
-
-static const struct tis_vendor_timeout_override vendor_timeout_overrides[] = {
-	/* Atmel 3204 */
-	{ 0x32041114, { (TIS_SHORT_TIMEOUT*1000), (TIS_LONG_TIMEOUT*1000),
-			(TIS_SHORT_TIMEOUT*1000), (TIS_SHORT_TIMEOUT*1000) } },
-};
-
-static bool tpm_tis_update_timeouts(struct tpm_chip *chip,
-				    unsigned long *timeout_cap)
+static void tpm_tis_update_timeouts(struct tpm_chip *chip)
 {
-	int i;
-	u32 did_vid;
-
-	did_vid = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
-
-	for (i = 0; i != ARRAY_SIZE(vendor_timeout_overrides); i++) {
-		if (vendor_timeout_overrides[i].did_vid != did_vid)
-			continue;
-		memcpy(timeout_cap, vendor_timeout_overrides[i].timeout_us,
-		       sizeof(vendor_timeout_overrides[i].timeout_us));
-		return true;
+	switch (ioread32(chip->vendor.iobase + TPM_DID_VID(0))) {
+	case 0x32041114: /* Atmel 3204 */
+		chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+		chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+		chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+		chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+		chip->vendor.timeout_adjusted = true;
+		break;
 	}
-
-	return false;
 }
 
 /*
diff --git a/include/linux/tpm.h b/include/linux/tpm.h
index 706e63e..2380ebf 100644
--- a/include/linux/tpm.h
+++ b/include/linux/tpm.h
@@ -41,8 +41,7 @@ struct tpm_class_ops {
 	int (*send) (struct tpm_chip *chip, u8 *buf, size_t len);
 	void (*cancel) (struct tpm_chip *chip);
 	u8 (*status) (struct tpm_chip *chip);
-	bool (*update_timeouts)(struct tpm_chip *chip,
-				unsigned long *timeout_cap);
+	void (*update_timeouts)(struct tpm_chip *chip);
 
 };
 
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Ed Swierk <eswierk-FilZDy9cOaHkQYj/0HfcvtBPR1lH4CV8@public.gmane.org>
To: tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-security-module-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v6 4/5] tpm: Allow TPM chip drivers to override reported command durations
Date: Fri, 10 Jun 2016 18:55:06 -0700	[thread overview]
Message-ID: <1465610107-87762-5-git-send-email-eswierk@skyportsystems.com> (raw)
In-Reply-To: <1465610107-87762-1-git-send-email-eswierk-FilZDy9cOaHkQYj/0HfcvtBPR1lH4CV8@public.gmane.org>

Some TPM chips report bogus command durations in their capabilities,
just as others report incorrect timeouts. Rework tpm_get_timeouts() to
allow chip drivers to override either via a single callback. Also
clean up handling of TPMs that report milliseconds instead of
microseconds.

Signed-off-by: Ed Swierk <eswierk-FilZDy9cOaHkQYj/0HfcvtBPR1lH4CV8@public.gmane.org>
---
 drivers/char/tpm/tpm-interface.c | 139 +++++++++++++++++++++------------------
 drivers/char/tpm/tpm_tis.c       |  35 +++-------
 include/linux/tpm.h              |   3 +-
 3 files changed, 85 insertions(+), 92 deletions(-)

diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index 4d1f62c..a14adfd 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -550,83 +550,94 @@ static int tpm_get_cap_prop(struct tpm_chip *chip, __be32 type, int size,
 
 int tpm_get_timeouts(struct tpm_chip *chip)
 {
-	struct tpm_cmd_t tpm_cmd;
-	unsigned long new_timeout[4];
-	unsigned long old_timeout[4];
-	struct duration_t *duration_cap;
-	ssize_t rc;
+	cap_t cap1, cap2;
+	int rc;
+	struct tpm_vendor_specific orig_vendor;
 
-	rc = tpm_get_cap_prop(chip, TPM_CAP_PROP_TIS_TIMEOUT, 4,
-			      &tpm_cmd.params.getcap_out.cap, "timeouts");
+	rc = tpm_get_cap_prop(chip, TPM_CAP_PROP_TIS_TIMEOUT, 4, &cap1,
+			      "timeouts");
 	if (rc)
 		return rc;
 
-	old_timeout[0] = be32_to_cpu(tpm_cmd.params.getcap_out.cap.timeout.a);
-	old_timeout[1] = be32_to_cpu(tpm_cmd.params.getcap_out.cap.timeout.b);
-	old_timeout[2] = be32_to_cpu(tpm_cmd.params.getcap_out.cap.timeout.c);
-	old_timeout[3] = be32_to_cpu(tpm_cmd.params.getcap_out.cap.timeout.d);
-	memcpy(new_timeout, old_timeout, sizeof(new_timeout));
+	rc = tpm_get_cap_prop(chip, TPM_CAP_PROP_TIS_DURATION, 3, &cap2,
+			       "durations");
+	if (rc)
+		return rc;
 
-	/*
-	 * Provide ability for vendor overrides of timeout values in case
-	 * of misreporting.
-	 */
-	if (chip->ops->update_timeouts != NULL)
-		chip->vendor.timeout_adjusted =
-			chip->ops->update_timeouts(chip, new_timeout);
+	be32_to_cpus(&cap1.timeout.a);
+	be32_to_cpus(&cap1.timeout.b);
+	be32_to_cpus(&cap1.timeout.c);
+	be32_to_cpus(&cap1.timeout.d);
+	chip->vendor.timeout_a = usecs_to_jiffies(cap1.timeout.a);
+	chip->vendor.timeout_b = usecs_to_jiffies(cap1.timeout.b);
+	chip->vendor.timeout_c = usecs_to_jiffies(cap1.timeout.c);
+	chip->vendor.timeout_d = usecs_to_jiffies(cap1.timeout.d);
 
-	if (!chip->vendor.timeout_adjusted) {
-		/* Don't overwrite default if value is 0 */
-		if (new_timeout[0] != 0 && new_timeout[0] < 1000) {
-			int i;
-
-			/* timeouts in msec rather usec */
-			for (i = 0; i != ARRAY_SIZE(new_timeout); i++)
-				new_timeout[i] *= 1000;
-			chip->vendor.timeout_adjusted = true;
-		}
+	/* Some TPMs report timeouts in milliseconds rather than
+	   microseconds. Use a value between 1 and 1000 as an
+	   indication that this is the case. */
+	if (cap1.timeout.a > 0 && cap1.timeout.a < 1000) {
+		chip->vendor.timeout_a = msecs_to_jiffies(cap1.timeout.a);
+		chip->vendor.timeout_b = msecs_to_jiffies(cap1.timeout.b);
+		chip->vendor.timeout_c = msecs_to_jiffies(cap1.timeout.c);
+		chip->vendor.timeout_d = msecs_to_jiffies(cap1.timeout.d);
+		chip->vendor.timeout_adjusted = true;
 	}
 
-	/* Report adjusted timeouts */
+	be32_to_cpus(&cap2.duration.tpm_short);
+	be32_to_cpus(&cap2.duration.tpm_medium);
+	be32_to_cpus(&cap2.duration.tpm_long);
+	chip->vendor.duration[TPM_SHORT] =
+		usecs_to_jiffies(cap2.duration.tpm_short);
+	chip->vendor.duration[TPM_MEDIUM] =
+		usecs_to_jiffies(cap2.duration.tpm_medium);
+	chip->vendor.duration[TPM_LONG] =
+		usecs_to_jiffies(cap2.duration.tpm_long);
+
+	memcpy(&orig_vendor, &chip->vendor, sizeof(orig_vendor));
+
+	/* Interpret duration values between 1 and 10000 as
+	   milliseconds to deal with TPMs like the Broadcom BCM0102 in
+	   the Dell Latitude D820. */
+	if (cap2.duration.tpm_short > 0 && cap2.duration.tpm_short < 10000) {
+		chip->vendor.duration[TPM_SHORT] =
+			msecs_to_jiffies(cap2.duration.tpm_short);
+		chip->vendor.duration[TPM_MEDIUM] =
+			msecs_to_jiffies(cap2.duration.tpm_medium);
+		chip->vendor.duration[TPM_LONG] =
+			msecs_to_jiffies(cap2.duration.tpm_long);
+		chip->vendor.duration_adjusted = true;
+	}
+
+	if (chip->ops->update_timeouts != NULL)
+		chip->ops->update_timeouts(chip);
+
 	if (chip->vendor.timeout_adjusted) {
 		dev_info(chip->pdev,
-			 HW_ERR "Adjusting reported timeouts: A %lu->%luus B %lu->%luus C %lu->%luus D %lu->%luus\n",
-			 old_timeout[0], new_timeout[0],
-			 old_timeout[1], new_timeout[1],
-			 old_timeout[2], new_timeout[2],
-			 old_timeout[3], new_timeout[3]);
+			 HW_ERR "Adjusted timeouts: A %u->%uus B %u->%uus"
+			 " C %u->%uus D %u->%uus\n",
+			 jiffies_to_usecs(orig_vendor.timeout_a),
+			 jiffies_to_usecs(chip->vendor.timeout_a),
+			 jiffies_to_usecs(orig_vendor.timeout_b),
+			 jiffies_to_usecs(chip->vendor.timeout_b),
+			 jiffies_to_usecs(orig_vendor.timeout_c),
+			 jiffies_to_usecs(chip->vendor.timeout_c),
+			 jiffies_to_usecs(orig_vendor.timeout_d),
+			 jiffies_to_usecs(chip->vendor.timeout_d));
 	}
 
-	chip->vendor.timeout_a = usecs_to_jiffies(new_timeout[0]);
-	chip->vendor.timeout_b = usecs_to_jiffies(new_timeout[1]);
-	chip->vendor.timeout_c = usecs_to_jiffies(new_timeout[2]);
-	chip->vendor.timeout_d = usecs_to_jiffies(new_timeout[3]);
-
-	rc = tpm_get_cap_prop(chip, TPM_CAP_PROP_TIS_DURATION, 3,
-			      &tpm_cmd.params.getcap_out.cap, "durations");
-	if (rc)
-		return rc;
-
-	duration_cap = &tpm_cmd.params.getcap_out.cap.duration;
-	chip->vendor.duration[TPM_SHORT] =
-	    usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_short));
-	chip->vendor.duration[TPM_MEDIUM] =
-	    usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_medium));
-	chip->vendor.duration[TPM_LONG] =
-	    usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_long));
-
-	/* The Broadcom BCM0102 chipset in a Dell Latitude D820 gets the above
-	 * value wrong and apparently reports msecs rather than usecs. So we
-	 * fix up the resulting too-small TPM_SHORT value to make things work.
-	 * We also scale the TPM_MEDIUM and -_LONG values by 1000.
-	 */
-	if (chip->vendor.duration[TPM_SHORT] < (HZ / 100)) {
-		chip->vendor.duration[TPM_SHORT] = HZ;
-		chip->vendor.duration[TPM_MEDIUM] *= 1000;
-		chip->vendor.duration[TPM_LONG] *= 1000;
-		chip->vendor.duration_adjusted = true;
-		dev_info(chip->pdev, "Adjusting TPM timeout parameters.");
+	if (chip->vendor.duration_adjusted) {
+		dev_info(chip->pdev,
+			 HW_ERR "Adjusted durations: short %u->%uus"
+			 " medium %u->%uus long %u->%uus\n",
+			 jiffies_to_usecs(orig_vendor.duration[TPM_SHORT]),
+			 jiffies_to_usecs(chip->vendor.duration[TPM_SHORT]),
+			 jiffies_to_usecs(orig_vendor.duration[TPM_MEDIUM]),
+			 jiffies_to_usecs(chip->vendor.duration[TPM_MEDIUM]),
+			 jiffies_to_usecs(orig_vendor.duration[TPM_LONG]),
+			 jiffies_to_usecs(chip->vendor.duration[TPM_LONG]));
 	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(tpm_get_timeouts);
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 088fa86..caf7278 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -475,34 +475,17 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
 	return rc;
 }
 
-struct tis_vendor_timeout_override {
-	u32 did_vid;
-	unsigned long timeout_us[4];
-};
-
-static const struct tis_vendor_timeout_override vendor_timeout_overrides[] = {
-	/* Atmel 3204 */
-	{ 0x32041114, { (TIS_SHORT_TIMEOUT*1000), (TIS_LONG_TIMEOUT*1000),
-			(TIS_SHORT_TIMEOUT*1000), (TIS_SHORT_TIMEOUT*1000) } },
-};
-
-static bool tpm_tis_update_timeouts(struct tpm_chip *chip,
-				    unsigned long *timeout_cap)
+static void tpm_tis_update_timeouts(struct tpm_chip *chip)
 {
-	int i;
-	u32 did_vid;
-
-	did_vid = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
-
-	for (i = 0; i != ARRAY_SIZE(vendor_timeout_overrides); i++) {
-		if (vendor_timeout_overrides[i].did_vid != did_vid)
-			continue;
-		memcpy(timeout_cap, vendor_timeout_overrides[i].timeout_us,
-		       sizeof(vendor_timeout_overrides[i].timeout_us));
-		return true;
+	switch (ioread32(chip->vendor.iobase + TPM_DID_VID(0))) {
+	case 0x32041114: /* Atmel 3204 */
+		chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+		chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+		chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+		chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+		chip->vendor.timeout_adjusted = true;
+		break;
 	}
-
-	return false;
 }
 
 /*
diff --git a/include/linux/tpm.h b/include/linux/tpm.h
index 706e63e..2380ebf 100644
--- a/include/linux/tpm.h
+++ b/include/linux/tpm.h
@@ -41,8 +41,7 @@ struct tpm_class_ops {
 	int (*send) (struct tpm_chip *chip, u8 *buf, size_t len);
 	void (*cancel) (struct tpm_chip *chip);
 	u8 (*status) (struct tpm_chip *chip);
-	bool (*update_timeouts)(struct tpm_chip *chip,
-				unsigned long *timeout_cap);
+	void (*update_timeouts)(struct tpm_chip *chip);
 
 };
 
-- 
1.9.1


------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e

  parent reply	other threads:[~2016-06-11  1:55 UTC|newest]

Thread overview: 121+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-08  0:45 [PATCH v4 0/4] tpm: Command duration logging and chip-specific override Ed Swierk
2016-06-08  0:45 ` Ed Swierk
2016-06-08  0:45 ` [PATCH v4 1/4] tpm_tis: Improve reporting of IO errors Ed Swierk
2016-06-08  0:45   ` Ed Swierk
2016-06-08  0:45 ` [PATCH v4 2/4] tpm: Add optional logging of TPM command durations Ed Swierk
2016-06-08  0:45   ` Ed Swierk
2016-06-08  0:45 ` [PATCH v4 3/4] tpm: Allow TPM chip drivers to override reported " Ed Swierk
2016-06-08  0:45   ` Ed Swierk
2016-06-08 19:05   ` [tpmdd-devel] " Jason Gunthorpe
2016-06-08 19:05     ` Jason Gunthorpe
2016-06-08 20:41     ` [tpmdd-devel] " Ed Swierk
2016-06-08  0:45 ` [PATCH v4 4/4] tpm_tis: Increase ST19NP18 TPM command duration to avoid chip lockup Ed Swierk
2016-06-08  0:45   ` Ed Swierk
2016-06-08 23:00 ` [PATCH v5 0/4] tpm: Command duration logging and chip-specific override Ed Swierk
2016-06-08 23:00   ` Ed Swierk
2016-06-08 23:00   ` [PATCH v5 1/4] tpm_tis: Improve reporting of IO errors Ed Swierk
2016-06-08 23:00     ` Ed Swierk
2016-06-08 23:00   ` [PATCH v5 2/4] tpm: Add optional logging of TPM command durations Ed Swierk
2016-06-08 23:00     ` Ed Swierk
2016-06-08 23:00   ` [PATCH v5 3/4] tpm: Allow TPM chip drivers to override reported " Ed Swierk
2016-06-08 23:00     ` Ed Swierk
2016-06-10 12:19     ` Jarkko Sakkinen
2016-06-10 17:34       ` Ed Swierk
2016-06-10 19:42         ` Jarkko Sakkinen
2016-06-10 19:42           ` Jarkko Sakkinen
2016-06-11  1:54           ` Ed Swierk
2016-06-11  1:54             ` Ed Swierk
2016-06-08 23:00   ` [PATCH v5 4/4] tpm_tis: Increase ST19NP18 TPM command duration to avoid chip lockup Ed Swierk
2016-06-08 23:00     ` Ed Swierk
2016-06-11  1:55   ` [PATCH v6 0/5] tpm: Command duration logging and chip-specific override Ed Swierk
2016-06-11  1:55     ` Ed Swierk
2016-06-11  1:55     ` [PATCH v6 1/5] tpm_tis: Improve reporting of IO errors Ed Swierk
2016-06-11  1:55       ` Ed Swierk
2016-06-11  1:55     ` [PATCH v6 2/5] tpm: Add optional logging of TPM command durations Ed Swierk
2016-06-11  1:55       ` Ed Swierk
2016-06-11  1:55     ` [PATCH v6 3/5] tpm: Factor out reading of timeout and duration capabilities Ed Swierk
2016-06-11  1:55       ` Ed Swierk
2016-06-16 20:20       ` Jarkko Sakkinen
2016-06-16 20:20         ` Jarkko Sakkinen
2016-06-19 12:12       ` Jarkko Sakkinen
2016-06-19 12:12         ` Jarkko Sakkinen
     [not found]         ` <20160619120157.GA29626-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-06-21  1:46           ` Ed Swierk
2016-06-11  1:55     ` Ed Swierk [this message]
2016-06-11  1:55       ` [PATCH v6 4/5] tpm: Allow TPM chip drivers to override reported command durations Ed Swierk
2016-06-16 20:26       ` Jarkko Sakkinen
2016-06-11  1:55     ` [PATCH v6 5/5] tpm_tis: Increase ST19NP18 TPM command duration to avoid chip lockup Ed Swierk
2016-06-11  1:55       ` Ed Swierk
2016-06-21  1:53     ` [PATCH v7 0/5] tpm: Command duration logging and chip-specific override Ed Swierk
2016-06-21  1:53       ` Ed Swierk
2016-06-21  1:53       ` [PATCH v7 1/5] tpm_tis: Improve reporting of IO errors Ed Swierk
2016-06-21  1:53         ` Ed Swierk
2016-06-21  1:53       ` [PATCH v7 2/5] tpm: Add optional logging of TPM command durations Ed Swierk
2016-06-21  1:53         ` Ed Swierk
2016-06-21  1:54       ` [PATCH v7 3/5] tpm: Clean up reading of timeout and duration capabilities Ed Swierk
2016-06-21  1:54         ` Ed Swierk
2016-06-21 20:52         ` Jarkko Sakkinen
2016-06-21 20:52           ` Jarkko Sakkinen
2016-06-22  0:21         ` Ed Swierk
2016-06-22  0:21           ` Ed Swierk
2016-06-22 10:46           ` Jarkko Sakkinen
2016-06-22 10:46             ` Jarkko Sakkinen
2016-06-21  1:54       ` [PATCH v7 4/5] tpm: Allow TPM chip drivers to override reported command durations Ed Swierk
2016-06-21  1:54         ` Ed Swierk
2016-06-21 20:54         ` Jarkko Sakkinen
2016-06-21 20:54           ` Jarkko Sakkinen
2016-06-21  1:54       ` [PATCH v7 5/5] tpm_tis: Increase ST19NP18 TPM command duration to avoid chip lockup Ed Swierk
2016-06-21  1:54         ` Ed Swierk
2016-06-21 20:55         ` Jarkko Sakkinen
2016-06-21 20:55           ` Jarkko Sakkinen
2016-06-22  1:10       ` [PATCH v8 0/5] tpm: Command duration logging and chip-specific override Ed Swierk
2016-06-22  1:10         ` Ed Swierk
2016-06-22  1:10         ` [PATCH v8 1/5] tpm_tis: Improve reporting of IO errors Ed Swierk
2016-06-22  1:10           ` Ed Swierk
2016-06-24 18:25           ` Jason Gunthorpe
2016-06-24 18:25             ` Jason Gunthorpe
2016-06-24 20:21             ` Jarkko Sakkinen
2016-06-24 20:23               ` Jarkko Sakkinen
2016-06-24 20:26               ` Jason Gunthorpe
2016-06-24 20:26                 ` Jason Gunthorpe
2016-06-25 15:24                 ` Jarkko Sakkinen
2016-06-25 15:24                   ` Jarkko Sakkinen
2016-06-25 15:47                   ` Jarkko Sakkinen
2016-06-25 15:47                     ` Jarkko Sakkinen
2016-06-27 17:55                     ` Jason Gunthorpe
2016-06-27 17:55                       ` Jason Gunthorpe
2016-06-22  1:10         ` [PATCH v8 2/5] tpm: Add optional logging of TPM command durations Ed Swierk
2016-06-22  1:10           ` Ed Swierk
2016-06-24 18:27           ` Jason Gunthorpe
2016-06-24 18:27             ` Jason Gunthorpe
2016-06-24 20:24             ` Jarkko Sakkinen
2016-06-24 20:24               ` Jarkko Sakkinen
2016-06-22  1:10         ` [PATCH v8 3/5] tpm: Clean up reading of timeout and duration capabilities Ed Swierk
2016-06-22  1:10           ` Ed Swierk
2016-06-22  1:10         ` [PATCH v8 4/5] tpm: Allow TPM chip drivers to override reported command durations Ed Swierk
2016-06-22  1:10           ` Ed Swierk
2016-06-22  1:10         ` [PATCH v8 5/5] tpm_tis: Increase ST19NP18 TPM command duration to avoid chip lockup Ed Swierk
2016-06-22  1:10           ` Ed Swierk
2016-07-13 16:19         ` [PATCH v9 0/5] tpm: Command duration logging and chip-specific override Ed Swierk
2016-07-13 16:19           ` [PATCH v9 1/5] tpm_tis: Improve reporting of IO errors Ed Swierk
2016-07-13 16:19           ` [PATCH v9 2/5] tpm: Add optional logging of TPM command durations Ed Swierk
2016-07-13 16:19           ` [PATCH v9 3/5] tpm: Clean up reading of timeout and duration capabilities Ed Swierk
2016-07-18 18:15             ` Jarkko Sakkinen
2016-07-18 18:19             ` Jarkko Sakkinen
2016-07-18 18:19               ` Jarkko Sakkinen
2016-07-18 18:20               ` Jarkko Sakkinen
2016-07-18 18:20                 ` Jarkko Sakkinen
2016-07-13 16:19           ` [PATCH v9 4/5] tpm: Allow TPM chip drivers to override reported command durations Ed Swierk
2016-07-13 17:04             ` kbuild test robot
2016-07-13 17:04               ` kbuild test robot
2016-07-18 18:40             ` Jarkko Sakkinen
2016-07-18 18:40               ` Jarkko Sakkinen
2016-07-13 16:19           ` [PATCH v9 5/5] tpm_tis: Increase ST19NP18 TPM command duration to avoid chip lockup Ed Swierk
2016-07-13 16:44           ` [PATCH v9 0/5] tpm: Command duration logging and chip-specific override Ed Swierk
2016-07-13 17:36             ` Jason Gunthorpe
2016-07-13 17:36               ` Jason Gunthorpe
2016-07-13 20:00               ` Ed Swierk
2016-07-13 20:00                 ` Ed Swierk
2016-07-13 20:58                 ` Eric W. Biederman
2016-07-13 20:59                 ` Jason Gunthorpe
2016-07-18 18:07           ` Jarkko Sakkinen
2016-07-18 18:07             ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465610107-87762-5-git-send-email-eswierk@skyportsystems.com \
    --to=eswierk@skyportsystems.com \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=jgunthorpe@obsidianresearch.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=stefanb@us.ibm.com \
    --cc=tpmdd-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.