From: Linus Walleij <linus.walleij@linaro.org> To: linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, Andy Gross <andy.gross@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, David Brown <david.brown@linaro.org>, Linus Walleij <linus.walleij@linaro.org> Subject: [PATCH 2/5] ARM: dts: add SDCC5 to Qualcomm MSM8660 Date: Tue, 14 Jun 2016 17:30:56 +0200 [thread overview] Message-ID: <1465918259-11138-3-git-send-email-linus.walleij@linaro.org> (raw) In-Reply-To: <1465918259-11138-1-git-send-email-linus.walleij@linaro.org> The SDCC5 SD/MMC controller is used for a second uSD slot on the APQ8060 Dragonboard. On most other systems it is just dark silicon so define it and leave it as "disabled" in the core SoC file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/dts/qcom-msm8660.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 6a62b62ad980..a5a38820554a 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -262,6 +262,22 @@ no-1-8-v; vmmc-supply = <&vsdcc_fixed>; }; + + sdcc5: sdcc@12200000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12200000 0x8000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + vmmc-supply = <&vsdcc_fixed>; + }; }; tcsr: syscon@1a400000 { -- 2.4.11
WARNING: multiple messages have this Message-ID (diff)
From: linus.walleij@linaro.org (Linus Walleij) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/5] ARM: dts: add SDCC5 to Qualcomm MSM8660 Date: Tue, 14 Jun 2016 17:30:56 +0200 [thread overview] Message-ID: <1465918259-11138-3-git-send-email-linus.walleij@linaro.org> (raw) In-Reply-To: <1465918259-11138-1-git-send-email-linus.walleij@linaro.org> The SDCC5 SD/MMC controller is used for a second uSD slot on the APQ8060 Dragonboard. On most other systems it is just dark silicon so define it and leave it as "disabled" in the core SoC file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/dts/qcom-msm8660.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 6a62b62ad980..a5a38820554a 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -262,6 +262,22 @@ no-1-8-v; vmmc-supply = <&vsdcc_fixed>; }; + + sdcc5: sdcc at 12200000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12200000 0x8000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + vmmc-supply = <&vsdcc_fixed>; + }; }; tcsr: syscon at 1a400000 { -- 2.4.11
next prev parent reply other threads:[~2016-06-14 15:31 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-06-14 15:30 [PATCH 0/5] APQ8060 Dragonboard support Linus Walleij 2016-06-14 15:30 ` Linus Walleij 2016-06-14 15:30 ` [PATCH 1/5] ARM: dts: add GPIO and MPP to MSM8660 PMIC Linus Walleij 2016-06-14 15:30 ` Linus Walleij 2016-06-14 18:57 ` Stephen Boyd 2016-06-14 18:57 ` Stephen Boyd 2016-06-14 15:30 ` Linus Walleij [this message] 2016-06-14 15:30 ` [PATCH 2/5] ARM: dts: add SDCC5 to Qualcomm MSM8660 Linus Walleij 2016-06-14 18:57 ` Stephen Boyd 2016-06-14 18:57 ` Stephen Boyd 2016-06-14 15:30 ` [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660 Linus Walleij 2016-06-14 15:30 ` Linus Walleij 2016-06-14 18:55 ` Stephen Boyd 2016-06-14 18:55 ` Stephen Boyd 2016-06-14 19:02 ` Bjorn Andersson 2016-06-14 19:02 ` Bjorn Andersson 2016-06-14 19:48 ` Stephen Boyd 2016-06-14 19:48 ` Stephen Boyd 2016-06-14 22:51 ` Russell King - ARM Linux 2016-06-14 22:51 ` Russell King - ARM Linux 2016-06-14 22:48 ` Russell King - ARM Linux 2016-06-14 22:48 ` Russell King - ARM Linux 2016-06-16 0:17 ` Stephen Boyd 2016-06-16 0:17 ` Stephen Boyd 2016-06-16 8:09 ` Russell King - ARM Linux 2016-06-16 8:09 ` Russell King - ARM Linux 2016-06-15 13:16 ` Linus Walleij 2016-06-15 13:16 ` Linus Walleij 2016-06-16 0:57 ` Stephen Boyd 2016-06-16 0:57 ` Stephen Boyd 2016-06-14 15:30 ` [PATCH 4/5] ARM: dts: move the fixed MMC regulator to SURF board Linus Walleij 2016-06-14 15:30 ` Linus Walleij 2016-06-14 18:55 ` Stephen Boyd 2016-06-14 18:55 ` Stephen Boyd 2016-06-14 15:30 ` [PATCH 5/5] ARM: dts: add Qualcomm APQ8060-based Dragonboard Linus Walleij 2016-06-14 15:30 ` Linus Walleij 2016-06-14 19:11 ` Stephen Boyd 2016-06-14 19:11 ` Stephen Boyd 2016-06-15 13:37 ` Linus Walleij 2016-06-15 13:37 ` Linus Walleij 2016-06-16 0:11 ` Stephen Boyd 2016-06-16 0:11 ` Stephen Boyd
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1465918259-11138-3-git-send-email-linus.walleij@linaro.org \ --to=linus.walleij@linaro.org \ --cc=andy.gross@linaro.org \ --cc=bjorn.andersson@linaro.org \ --cc=david.brown@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-soc@vger.kernel.org \ --cc=sboyd@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.