From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <mohammed@codeaurora.org>, <linux-wireless@vger.kernel.org>, "Mohammed Shafi Shajakhan" <mohammed@qti.qualcomm.com> Subject: [PATCH] ath10k: Enable beacon loss detection support for 10.4 Date: Thu, 16 Jun 2016 18:24:44 +0530 [thread overview] Message-ID: <1466081684-8074-1-git-send-email-mohammed@qca.qualcomm.com> (raw) From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Enable beacon loss detection support for 10.4 by handling roam event. With this change QCA99X0 station is able to detect beacon loss when the AP is powered off Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/wmi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 6279ab4..4dd35f1 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -5257,6 +5257,9 @@ static void ath10k_wmi_10_4_op_rx(struct ath10k *ar, struct sk_buff *skb) case WMI_10_4_PEER_STA_KICKOUT_EVENTID: ath10k_wmi_event_peer_sta_kickout(ar, skb); break; + case WMI_10_4_ROAM_EVENTID: + ath10k_wmi_event_roam(ar, skb); + break; case WMI_10_4_HOST_SWBA_EVENTID: ath10k_wmi_event_host_swba(ar, skb); break; @@ -7903,6 +7906,7 @@ static const struct wmi_ops wmi_10_4_ops = { .pull_phyerr = ath10k_wmi_10_4_op_pull_phyerr_ev, .pull_svc_rdy = ath10k_wmi_main_op_pull_svc_rdy_ev, .pull_rdy = ath10k_wmi_op_pull_rdy_ev, + .pull_roam_ev = ath10k_wmi_op_pull_roam_ev, .get_txbf_conf_scheme = ath10k_wmi_10_4_txbf_conf_scheme, .gen_pdev_suspend = ath10k_wmi_op_gen_pdev_suspend, -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> To: ath10k@lists.infradead.org Cc: mohammed@codeaurora.org, linux-wireless@vger.kernel.org, Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Subject: [PATCH] ath10k: Enable beacon loss detection support for 10.4 Date: Thu, 16 Jun 2016 18:24:44 +0530 [thread overview] Message-ID: <1466081684-8074-1-git-send-email-mohammed@qca.qualcomm.com> (raw) From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Enable beacon loss detection support for 10.4 by handling roam event. With this change QCA99X0 station is able to detect beacon loss when the AP is powered off Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/wmi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 6279ab4..4dd35f1 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -5257,6 +5257,9 @@ static void ath10k_wmi_10_4_op_rx(struct ath10k *ar, struct sk_buff *skb) case WMI_10_4_PEER_STA_KICKOUT_EVENTID: ath10k_wmi_event_peer_sta_kickout(ar, skb); break; + case WMI_10_4_ROAM_EVENTID: + ath10k_wmi_event_roam(ar, skb); + break; case WMI_10_4_HOST_SWBA_EVENTID: ath10k_wmi_event_host_swba(ar, skb); break; @@ -7903,6 +7906,7 @@ static const struct wmi_ops wmi_10_4_ops = { .pull_phyerr = ath10k_wmi_10_4_op_pull_phyerr_ev, .pull_svc_rdy = ath10k_wmi_main_op_pull_svc_rdy_ev, .pull_rdy = ath10k_wmi_op_pull_rdy_ev, + .pull_roam_ev = ath10k_wmi_op_pull_roam_ev, .get_txbf_conf_scheme = ath10k_wmi_10_4_txbf_conf_scheme, .gen_pdev_suspend = ath10k_wmi_op_gen_pdev_suspend, -- 1.9.1 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2016-06-16 12:53 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-06-16 12:54 Mohammed Shafi Shajakhan [this message] 2016-06-16 12:54 ` [PATCH] ath10k: Enable beacon loss detection support for 10.4 Mohammed Shafi Shajakhan 2016-06-30 11:00 ` Kalle Valo 2016-06-30 11:00 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1466081684-8074-1-git-send-email-mohammed@qca.qualcomm.com \ --to=mohammed@qti.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ --cc=mohammed@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.