From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-fbdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: [PATCH] video: s3c2410fb: Register cpufreq notifier only on S3C24xx
Date: Mon, 27 Jun 2016 14:52:25 +0200 [thread overview]
Message-ID: <1467031945-10486-1-git-send-email-k.kozlowski@samsung.com> (raw)
The driver registered for CPU frequency transitions to recalculate its
clock when ARM clock frequency changes (ratio between frequencies of
ARM's parent clock (fclk) and clock for peripherals remains fixed).
This is needed only on S3C24xx platform when cpufreq driver is enabled
so limit the ifdef to respective cpufreq Kconfig.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/video/fbdev/s3c2410fb.c | 2 +-
drivers/video/fbdev/s3c2410fb.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
index 0dd86be36afb..a67e4567e656 100644
--- a/drivers/video/fbdev/s3c2410fb.c
+++ b/drivers/video/fbdev/s3c2410fb.c
@@ -767,7 +767,7 @@ static irqreturn_t s3c2410fb_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-#ifdef CONFIG_CPU_FREQ
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
static int s3c2410fb_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
diff --git a/drivers/video/fbdev/s3c2410fb.h b/drivers/video/fbdev/s3c2410fb.h
index 47a17bd23011..cdd11e2f8859 100644
--- a/drivers/video/fbdev/s3c2410fb.h
+++ b/drivers/video/fbdev/s3c2410fb.h
@@ -32,7 +32,7 @@ struct s3c2410fb_info {
unsigned long clk_rate;
unsigned int palette_ready;
-#ifdef CONFIG_CPU_FREQ
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
struct notifier_block freq_transition;
#endif
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] video: s3c2410fb: Register cpufreq notifier only on S3C24xx
Date: Mon, 27 Jun 2016 12:52:25 +0000 [thread overview]
Message-ID: <1467031945-10486-1-git-send-email-k.kozlowski@samsung.com> (raw)
The driver registered for CPU frequency transitions to recalculate its
clock when ARM clock frequency changes (ratio between frequencies of
ARM's parent clock (fclk) and clock for peripherals remains fixed).
This is needed only on S3C24xx platform when cpufreq driver is enabled
so limit the ifdef to respective cpufreq Kconfig.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/video/fbdev/s3c2410fb.c | 2 +-
drivers/video/fbdev/s3c2410fb.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
index 0dd86be36afb..a67e4567e656 100644
--- a/drivers/video/fbdev/s3c2410fb.c
+++ b/drivers/video/fbdev/s3c2410fb.c
@@ -767,7 +767,7 @@ static irqreturn_t s3c2410fb_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-#ifdef CONFIG_CPU_FREQ
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
static int s3c2410fb_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
diff --git a/drivers/video/fbdev/s3c2410fb.h b/drivers/video/fbdev/s3c2410fb.h
index 47a17bd23011..cdd11e2f8859 100644
--- a/drivers/video/fbdev/s3c2410fb.h
+++ b/drivers/video/fbdev/s3c2410fb.h
@@ -32,7 +32,7 @@ struct s3c2410fb_info {
unsigned long clk_rate;
unsigned int palette_ready;
-#ifdef CONFIG_CPU_FREQ
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
struct notifier_block freq_transition;
#endif
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski@samsung.com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] video: s3c2410fb: Register cpufreq notifier only on S3C24xx
Date: Mon, 27 Jun 2016 14:52:25 +0200 [thread overview]
Message-ID: <1467031945-10486-1-git-send-email-k.kozlowski@samsung.com> (raw)
The driver registered for CPU frequency transitions to recalculate its
clock when ARM clock frequency changes (ratio between frequencies of
ARM's parent clock (fclk) and clock for peripherals remains fixed).
This is needed only on S3C24xx platform when cpufreq driver is enabled
so limit the ifdef to respective cpufreq Kconfig.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/video/fbdev/s3c2410fb.c | 2 +-
drivers/video/fbdev/s3c2410fb.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
index 0dd86be36afb..a67e4567e656 100644
--- a/drivers/video/fbdev/s3c2410fb.c
+++ b/drivers/video/fbdev/s3c2410fb.c
@@ -767,7 +767,7 @@ static irqreturn_t s3c2410fb_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-#ifdef CONFIG_CPU_FREQ
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
static int s3c2410fb_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
diff --git a/drivers/video/fbdev/s3c2410fb.h b/drivers/video/fbdev/s3c2410fb.h
index 47a17bd23011..cdd11e2f8859 100644
--- a/drivers/video/fbdev/s3c2410fb.h
+++ b/drivers/video/fbdev/s3c2410fb.h
@@ -32,7 +32,7 @@ struct s3c2410fb_info {
unsigned long clk_rate;
unsigned int palette_ready;
-#ifdef CONFIG_CPU_FREQ
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
struct notifier_block freq_transition;
#endif
--
1.9.1
next reply other threads:[~2016-06-27 12:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-27 12:52 Krzysztof Kozlowski [this message]
2016-06-27 12:52 ` [PATCH] video: s3c2410fb: Register cpufreq notifier only on S3C24xx Krzysztof Kozlowski
2016-06-27 12:52 ` Krzysztof Kozlowski
2016-08-10 10:40 ` Tomi Valkeinen
2016-08-10 10:40 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467031945-10486-1-git-send-email-k.kozlowski@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=plagnioj@jcrosoft.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.